- Measuring range: 0 ... 4000 ppm
- Measuring range: 10 ... 90% RH
- Measuring range: 0 ... 50 °C / 32 ... 122 °F
- Memory on SD card
- 3 parameters of air quality
- CO2, air temperature and humidity
- incl. ISO Calibration Certificate (for CO2 only)

PCE-WMM 50-ICA is a wall-mounted carbon dioxide gas leak detector that uses diffusion to monitor carbon dioxide (CO2) gas levels and ambient temperature (ºC / ºF) indoors. This indoor carbon dioxide gas leak detector features an alarm-activated potential-free contact that can, for example, activate a fan to reduce CO2 gas concentration in the room.

- CO2 gas measurement range: 0 ... 50,000 ppm
- Temperature measurement range: 0 ... +45 ºC / +32 ... +113 ºF
- IP54-rated enclosure on sensor and remote display units
- 2 adjustable alarm thresholds
- 3- to 4-digit remote display (depends on range)
- incl. ISO Calibration Certificate

The Xsafe gas leak detector is a robust gas sensor for flammable gases in the safe range. The Xsafe gas leak detector is available in different versions, depending on the gases for which it is to be used. The gas measuring device measures the respective flammable gases with the help of an integrated pellistor.

- Different versions available
- For use in safe areas
- Detection by pellistor
- 3-wire 4 ... 20 mA or mV output

The Gas Leak Detector Gasman-CL2is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Leak Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Leak Detector fulfills all the European and international norms, even ATEX and UL standards.

- Non-rechargeable, 1-year battery
- For CL₂ (Chlorine)
- Dust and water resistant - IP 65/67
- 0 ... 5 ppm

 

- Fine dust, formaldehyde, humidity, temperature, TVOC
- Particle size channels : PM 2.5 / PM 10
- Measuring range TVOC: 0.00 ... 9.99 mg / m³ (volatile organic compounds)
- Measuring range temperature: -20 ... 70°C / -4 ... 158°F
- Measuring range humidity: 0 ... 100% RH
- Measuring range formaldehyde: 0.00 ... 5.00 mg / m³
- Interface: USB
- For indicative measurements

Triple Plus+ is the latest generation of the respected "Triple" family of toxic, oxygen and flammable gas detectors. Intrinsically safe, the Triple Plus+ provides enhanced features for safety and detector fleet managers including:

- Selection of flammable gas correction factors (so one unit can be used in
  several locations across a site)
- Annotation of the data file with user names and site names selected from
  pre-configured files in the unit

* Call to order or see accessories tab. Must specify sensors (see chart for details) and choose with / without internal pump. Charger and software sold separately.

 

- Measuring range: 0.3 ... 25 μm
- Measurement channel sizes: 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 μm
- Counting efficiency: 50% at 0.3 μm, 100% at > 0.45 μm according to JIS
- Ethernet, USB
- CO2 sensor
- PID sensor
- Includes temperature and humidity sensor
- Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

This gas detector Gas-Pro-2 can gauge with its sensors a maximum of five different gases. Because of this versatility, the gas detector Gas-Pro-2 is ideal for use in a variety of applications, such as near canals, sewage treatment plants, drains, wastewater facilities, dumps and landfills, chemical and oil plants, shipping ports and more.

- Purpose: Personal protection
- Sensor type: CO / H2S / O2 / CH4
- Memory: Yes
- Interface: USB
- Includes suction pump
- Other gas sensors available upon request. (Please email jmu@pce-instruments.com (UK) or jwe@pce-instruments.com (US) for details!)

The Gas Leak Detector Gasman-O2 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Leak Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Leak Detector fulfills all the European and international norms, even ATEX and UL standards.

- Non-rechargeable, 1-year battery
- For NO₂ (Oxygen)
- Dust and water resistant - IP 65/67
- 0... 25% v/v

This gas leak detector is designed to be a cost-effective solution for applications where protection against a specific combustible or toxic gas is required. The Gasman gas leak detector is a standalone gas detector.

Gas detector for H2S
- Range: 0...100ppm
- Alarm: 5ppm
- Memory for 5000 events
- Data logger for 900 hours of storage with 1 minute intervals
- Interface for calibrating, configuring and reading out the data
- Weight only 130g / 4.5 oz

The gas leak detector has a CO² measuring range of 0 ... 9999 ppm. In addition to the carbon dioxide measurement, the gas leak detector also has a carbon monoxide (CO) sensor with a measuring range of 0 ... 1000 ppm and a temperature and humidity sensor.

- Carbon monoxide (CO): 0 … 1000 ppm
- Carbon dioxide (CO²): 0 … 9999 ppm
- Temperature: 0 … 50 °C / 32 … 122 °F
- Humidity: 0 … 100% RH
- Data memory for 5000 measuring points
- Data export CSV
- Power supply: rechargeable battery

- Measuring range: 0.3 ... 25 μm
- Measurement channel sizes: 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 μm
- Counting efficiency: 50% at 0.3 μm, 100% at > 0.45 μm according to JIS
- CO2 Sensor: 0 ... 5000 ppm
- PID Sensor: 0 ... 50 ppm
- Ethernet, USB
- Includes temperature and humidity sensor
- Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

Humidity Detector for liquid materials are used in boiler installations, water-dosing and diesel oil emulsion dispersion systems. The scope of supply can include the control cabinet to operate the valves regulating water feed. The humidity detector for liquid materials has a processing unit with RS232/RS485 interfaces.

- Measurement range: 0 ... 100 %
- Temperature range: +5 ... +80 °C  (+41 ... +176 °F)

 

The Gas Leak Detector Gasman-CO is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Leak Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Leak Detector fulfills all the European and international norms, even ATEX and UL standards.

- Non-rechargeable, 1-year battery
- For CO (Carbon Monoxide)
- Dust and water resistant - IP 65/67
- 0... 500 ppm

 

- Measuring range: 0.3 ... 25 μm
- Measuring channel sizes: 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 μm
- Counting efficiency: 50% at 0.3 μm 100% at > 0.45 μm according to JIS
- Ethernet, USB
- CO2 sensor
- Includes temperature and humidity sensor
- Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

- Measuring range: 0.5 ... 75 μm
- Measuring channel sizes: 0.5, 1.0, 2.5, 5.0, 10.0, 30.0 μm
- Counting efficiency: 50% at 0.5 μm 100% at > 0.75 μm according to JIS
- ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration
- USB
- Incl. temperature and humidity sensor
- Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

The Xgard-1-SO2 is a single-gas Gas Leak Detector used to warn for gases (Sulfur Dioxide, SO₂, 0 ... 10 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Sulfur Dioxide, SO₂, 0 ... 10 ppm)
- Additional display and alarm station
- ATEX or UL approval