The infrared imaging camera has a resolution of 320 x 240 pixels. With a measuring range of -20 ... 300 °C, the infrared imaging camera already covers a large temperature range. The emission value of the infrared imaging camera can be set to carry out measurements on different surfaces.

- Measuring range: -20 ... 300 °C / -4 ... 572 °F
- Infrared and real image resolution: 320 x 240 pixels
- Picture in picture function
- USB-C interface
- Refresh rate: 9Hz
- Storage for about 20,000 images
- incl. ISO Calibration Certificate

- Temperature measuring range: 32.0… 122.0 °F
- Humidity measuring range: 0.0 ... 99.9% RH
- Connection of up to four external sensors
- Analog 4 ... 20-mA input signal
- Wall mounting
- Incl. ISO calibration certificate

The rotary viscometer uses the mechanical resistance of any liquid to measure viscosity using rotational movement of a spindle. This results in a torque that is recognized by the rotary viscometer and converted into a viscosity value. With an accuracy of ± 1.0%, the rotary viscometer is a very precise measuring device despite the high measuring range of 10 … 2,000,000 cP (mPa*s).

- Viscosity measuring range: 10 ... 2,000,000 cP
- Accuracy: ± 1% of full scale (with Newtonian liquid)
- Rotation speeds: 0.3, 0.6, 1.5, 3, 6, 12, 30, 60 rpm
- Various viscosity units can be displayed (mPa*s, Pa*s, dPa*s, cP, P, cPs)
- Includes 4 spindles in the kit, an optional spindle (L0) measures down to 1 cP

- Measuring range: 0 ... 4000 ppm
- Measuring range: 10 ... 90% RH
- Measuring range: 0 ... 50 °C / 32 ... 122 °F
- Memory on SD card
- 3 parameters of air quality
- CO2, air temperature and humidity

The condition monitoring infrared thermometer has a measuring range of -50 ... +500 °C and an adjustable emission value between 0.10 ... 1.00. In addition to the current reading, the largest, smallest, average and differential reading can be displayed.

- Measuring range: -50 … 500 °C / -58 … 932 °F
- Resolution: 0.1°C
- Accuracy: ±3 °C / ±5.4 °F at -50 … 20 °C / -58 … 68 °F
- Spot ratio: 12:1
- Multipoint laser

With the infrared thermometer you get a measuring device with which you can perform a wide range of measuring tasks. On the one hand, you can directly measure and read the temperature of bodies without contact, on the other hand you can also save the measured values internally in the data logger and transfer them to a PC or laptop via the RS-232 interface.

- Range: -40 ... +500 °C / -40 ... 932 °F
- Resolution: 0.1 °C / 0.18 °F
- Accuracy: ±2%
- Memory: 4 x 99 values
- E-factor: 0.3 ... 1.0 (adjustable)
- incl. software and RS-232 cable
- incl. ISO calibration certificate

- Measuring range: 0 ... 600°C / 32 ... 1112°F
- Measurement accuracy: ± 1.5°C / 2.7°F or 1% of the measured value
- Output: 4 ... 20-mA
- Cable length: 3 m / 9.8 ft

The thermometer has a resolution of 320 x 240 pixels. With a measuring range of -20 ... 300 °C, the thermometer already covers a large temperature range. The emission value of the thermometer can be set to carry out measurements on different surfaces.

- Measuring range: -20 ... 300 °C / -4 ... 572 °F
- Infrared and real image resolution: 320 x 240 pixels
- Picture in picture function
- USB-C interface
- Refresh rate: 9Hz
- Storage for about 20,000 images

- IR resolution: 220 x 160 pixels
- Measuring range: -20 ... 300°C / -4  ... 572°F
- Thermal sensitivity: 70 mK
- Memory: 3 GB memory for more than 20,000 pictures
- 5 different color palettes
- Hot and cold spot location
- Picture in Picture function