With the humidity detector it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the humidity detector. The humidity detector can therefore be used universally because of its various measuring functions to determine the ambient conditions.

Measuring ranges:
- Humidity: 0 ... 100% RH
- Ambient temperature: -20 ... 60 °C / -4 ... 140 °F
- Wet bulb temperature: 0 ... 60 °C / 32 ... 140 °F
- Dew point temperature: -20 ... 60 °C / -4 ... 140 °F
- Interface: Bluetooth
- MIN / MAX / HOLD function

The Gas Detector AQ-300 Set EF is a high-precision measuring device for measuring the formaldehyde concentration in our circulating air.

- Range Formaldehyde: 0...10 ppm
- High accuracy and functionality
- Alarm function: "High", "Low", Mute
- Alarm output: Transistor output, 150-mA max
- Low Alarm, High Alarm & Control
- Analog output: 0... 5V
- Location ID: Storage of the measuring location

The Xgard-1-O3 is a single-gas Gas Leak Detector used to warn for gases (Ozone, O₃, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Ozone, O₃, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

The condition monitoring gas leak detector is used in various areas of industry. For example, the gas leak detector is used on compressed air, gas, steam and vacuum systems, as well as on refrigeration systems and door seals.

- Working frequency: 40 kHz (± 2 kHz)
- Operating time: >10 hours
- Various attachments
- Color display: 3.5" touch panel TFT
- Soundproof headphones

The PCE-830-2 Portable Power Analyzer is used for measuring one to three phases of electrical quantities for alternating current (AC). This Portable Power Analyzer also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.

- PCE-830 + PCE-6802 amp clamp (1000 A)
- Electrical conductor pick-up: 55 mm / 2.1 in diameter
- Range selection: manual (10 A, 100 A, 1000 A)
- Clamp dimensions: 244 mm x 97 mm x 46 mm / 9.6 in x 3.7 in x 1.8 in
- Sampling rate: 2 sec.
- Memory size: 512 kB (max. 52,000 values (single phase)

The PCE-830 3-Phase Power Meter / 3-Phase Power Analyzer is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Power Meter / 3-Phase Power Analyzer also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.

- PCE-830 + PCE-6802 amp clamp (1000 A)
- Electrical conductor pick-up: 55 mm / 2.2 in diameter
- Range selection: manual (10 A, 100 A, 1000 A)
- Clamp dimensions: 244 x 97 x 46 mm / 9.6 x 3.8 x 1.8 in
- Incl. ISO calibration certificate

The ultrasonic leak detector is used in various areas of industry. For example, the ultrasonic leak detector is used on compressed air, gas, steam and vacuum systems, as well as on refrigeration systems and door seals.

- Working frequency: 40 kHz (± 2 kHz)
- Operating time: >10 hours
- Various attachments
- Color display: 3.5" touch panel TFT
- Soundproof headphones

Triple Plus+ is the latest generation of the respected "Triple" family of toxic, oxygen and flammable gas detectors. Intrinsically safe, the Triple Plus+ provides enhanced features for safety and detector fleet managers including:

- Selection of flammable gas correction factors (so one unit can be used in
  several locations across a site)
- Annotation of the data file with user names and site names selected from
  pre-configured files in the unit

* Call to order or see accessories tab. Must specify sensors (see chart for details) and choose with / without internal pump. Charger and software sold separately.

 

This humidity detector station with outside sensor is a real all-rounder. The wireless humidity detector station with outside sensor is easy to assemble based on the instructions provided. You do not have to be a professional to operate the wireless humidity detector station and outside sensors. The weather data of the humidity detector station with outside sensor for different parameters are sent up to 100 meters by radio signal to the main station.

- Indoor temperature in Celsius or Fahrenheit
- Outside temperature in Celsius or Fahrenheit
- Indoor air humidity / outdoor air humidity
- Air pressure gauge in inHg or hPa
- Absolute or relative air pressure display selectable
- Precipitation indication in mm or inch
- Precipitation indicator for 1 hour, 24 hours, 1 week, 1 month
- Wind speed in mph, km / h, m / s, knots ...
- Wind direction indicator
- Wind chill temperature gauge
- Weather forecast, trend indicator, storm warning
- and much more...

Measuring function
- PM2.5
- Humidity
- Temperature
- CO2
- Air pressure
- Memory: SD card max. 32 GB
- Ideal for workplace monitoring
- Alarm function

The Humidity Detector PCE-P18S measures air humidity and air temperature. The Humidity Detector calculates the dew point and the absolute humidity from these two values. The measurement data from the Humidity Detector are output via the Modbus RTU interface.

Gas Detector AQ-500 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Detector can be equipped with four different heads that vary in their measurement range.

- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head EOZ included in delivery (Ozone 0-10 ppm)
- Alarm function
- Data logger

Measuring function
- PM2.5
- Humidity
- Temperature
- CO2
- Air pressure
- Memory: SD card max. 32 GB
- Ideal for workplace monitoring
- Alarm function

The Xgard-1-O3 is a single-gas Gassensor used to warn for gases (Ozone, O₃, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Ozone, O₃, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

The radiation detector kit is a useful tool to examine solar cells for their characteristic curves. This enables a statement to be made about the composition and design of a photovoltaic system.

Radiation detector PCE-PVA 100
- Measuring range: 0 ... 12 A DC
- Three different test functions
- PC interface for data transfer

Radiation detector PCE-SPM 1
- Measuring range: 0 ... 2000 W/m²
- Resolution: 1 W/m²
- Accuracy: ± 10 W/m² or ± 5%
- Data memory: 32,000 measured values
- Application, e.g .: photovoltaic systems

Gas Leak Detector AQ-300 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Leak Detector can be equipped with four different heads that vary in their measurement range.

- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head OZU included in delivery  (Ozone 0-0.15 ppm)
- Alarm function

The Xgard-1-NH3 is a single-gas Gas detector used to warn for gases (Ammonia, NH₃, 0 ... 50 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Ammonia, NH₃, 0 ... 50 ppm)
- Additional display and alarm station
- ATEX or UL approval

PCE-PCO 2 is a portable handheld air sampler or particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature, dew point and relative humidity.

- PM channels: PM 2.5, PM 10, including mass concentration mode (µg/m³)
- Particle sizes (in micrometers): 0.3 µm, 0.5 µm, 1.0 µm, 2.5 µm, 5.0 µm, 10 µm
- Temp. measuring range: 0 ... +50 °C / +32 ... +122 °F
- Humidity measuring range: 0 ... 100 % RH
- Built-in camera for image and video recording
- Free software download on PCE Software web page