PCE-VA 20 is a humidity detector for testing heating, ventilation and air conditioning or cooling (HVAC) systems. This combination anemometer-hygrometer-thermometer features a 10 cm / 3.9" Ø fan impeller, easy-to-read backlit LCD, and functions such as display hold, average value, maximum value, minimum value, battery-saving automatic power off, low-battery indicator, and metric or imperial unit selection.

- Measures air flow velocity, volume flow, relative humidity, air temperature, dew
  point temperature and wet-bulb temperature
- Air flow velocity range: 0.2 ... 30 m/s (39.4 ... 5905.5 fpm)
- Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of
  measured value + 0.3 m/s) when more than 20 m/s
- Resolution: 0.1

 

PCE-VA 20-SET is a humidity detector with capture hoods for assessing and balancing heating, ventilation and air conditioning or cooling (HVAC) systems. This combined hygrometer-anemometer-thermometer possesses a 10 cm / 3.9" diameter fan impeller and a bright backlit LCD. The functions of the device incorporate display hold, mean value, max value, min value, battery-saving auto shutdown, low-battery display, and a choice between metric and imperial units.

- Measures air flow velocity, volume flow, relative humidity, air temperature, dew
  point temperature and wet-bulb temperature
- Air flow velocity range: 0.2 ... 30 m/s (39.4 ... 5905.5 fpm)
- Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of
  measured value + 0.3 m/s) when more than 20 m/s
- Resolution: 0.1°C / 0.18°F
- Includes 2 x capture hoods (1 x round 210 mm / 8.3 in Ø, 1 x square 346 x 346
  mm / 13.6 x 13.6 in)

- Measuring ranges
   Air humidity: 0 ... 100% RH
   Absolute humidity: 0 ... 500 g/m³
   Temperature: -30 ... 100°C / -22 ... 212°F
   Dew point temperature: -30 ... 100°C / -22 ... 212°F
   Wet bulb temperature: 0 ... 80°C / 32 ... 176°F
- Accuracy
   Humidity: ± 2% (40 ... 60% RH)
   Temperature: ± 0.5°C / 0.9°F (20 ... 60°C / 68 ... 140°F)
- HOLD and extreme value display
- Including sinter filter
- Including ISO Calibration Certificate

- For 18 cereals
- Small amount of sample
- Temperature compensation: automatic

The humidity detector has a temperature measuring range of -20 ... 60 °C and a humidity measuring range of 0 ... 99.9% RH. The readings from the humidity detector can be read directly on the 2.3" color display.

Temperature measurement
- Measuring range: -20 ... 60 °C / -4 ... 140 °F
Humidity measurement
- Measuring range: 0 ... 99.9% RH
- Data memory for 12800 measuring points
- For mounting on the wall
- WiFi interface
- incl. ISO Calibration Certificate

PCE-HT 225E is a concrete test hammer, also called a concrete rebound hammer or Swiss hammer, used for non-destructive measurements of surface hardness and compression strength. Suitable for use with concrete, rock and building materials, this rebound hammer features a direct digital display, voice functionality, USB port data interface and memory for storing up 200 measurement values.

- Test range: 10 ... 60 MPa or 100 ... 600 kg/cm² / 1450.38 ... 8702.26 psi
- Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
- Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
- Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
- Data processing software included

 

PCE-HT 225E is a roll hardness test hammer, also called a rolled paper rebound hammer or Swiss hammer, used for non-destructive measurements of surface hardness and compression strength. Suitable for use with rolled paper, concrete, rock and building materials, this rebound hammer features a direct digital display, voice functionality, USB port data interface and memory for storing up 200 measurement values.

- Test range: 10 ... 60 MPa or 100 ... 600 kg/cm² / 1450.38 ... 8702.26 psi
- Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
- Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
- Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
- Data processing software included

 

- Relative scale: 0.0 ... 99.9%
- Accuracy: ± 0.5%
- Resolution: 0.1%
- For measurements on wood and concrete
- Individually adjustable alarm limits
- Setting in CM% possible
- Numerical and graphical view
- Results are delivered by Carbit method

The durometer is an analog measuring device to determine concrete strength. The measuring method of the concrete durometer is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the durometer. The resulting rebound enables the durometer to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle

PCE-HT 225E is a surface testing concrete test hammer, also called a concrete rebound hammer or Swiss hammer, used for non-destructive measurements of surface hardness and compression strength. Suitable for use with concrete, rock and building materials, this rebound hammer features a direct digital display, voice functionality, USB port data interface and memory for storing up 200 measurement values.

- Test range: 10 ... 60 MPa or 100 ... 600 kg/cm² / 1450.38 ... 8702.26 psi
- Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
- Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
- Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
- Data processing software included

 

- Measuring ranges
   Air humidity: 0 ... 100% RH
   Absolute humidity: 0 ... 500 g/m³
   Temperature: -30 ... 100°C / -22 ... 212°F
   Dew point temperature: -30 ... 100°C / -22 ... 212°F
   Wet bulb temperature: 0 ... 80°C / 32 ... 176°F
- Accuracy
   Humidity: ± 2% (40 ... 60% RH)
   Temperature: ± 0.5°C / 0.9°F (20 ... 60°C / 68 ... 140°F)
- HOLD and extreme value display
- Including sinter filter

The Humidity Detector PCE-CMM 10 is a multi-function meter for measuring the air quality. This humidity detector measures synchronously the CO2 concentration, the air temperature and the humidity.

- Measuring range CO2: 400 ... 5000 ppm
- Measuring range temperature: -10.0 ... 50.0°C / 14 ... 122°F
- Measuring range humidity: 0 ... 99% rh
- Battery operation
- Limit exceeded
- Beep

The PCE-HT 71N Relative Humidity Meter detects air temperature and humidity and stores readings in its internal memory. The Relative Humidity Meter has a compact format and a wide memory capacity (up to 32,000 values / 16,000 values for each parameter) and it is mainly used as a Relative Humidity Meter in fields such as supermarket refrigeration units, refrigerated transport, warehouses, and other temperature controlled environments.

- Measurement range: 0 ... 100% RH / -35 ... 80°C / -31 ... 176°F
- Accuracy: ± 3% RH (20 ... 80%) and  ± 5% / ± 1°C (1.8°F)
- Resolution: 0.5% RH / 0.1°C (0.18°F)
- Memory: Max. 32,000 measurement data (16,000 for each parameter (humidity / temperature))

The humidity detector records the air temperature and humidity and stores them internally. The compact humidity detector with a large memory (up to a maximum of 16,000 values) is primarily used for long-term registration, for example in the food sector (e.g. refrigerated counters in supermarkets, refrigerated transport, warehouses) or in the industrial sector (heating and cooling processes, machine temperatures, product warehouses...)

- Measuring range temperature: -40 ... 85 °C
- Measuring range rel. humidity: 0 ... 100%
- Max. 16,000 data records can be saved
- Export to software possible
- 450 day running time
- Adjustable storage rate from 1 second