- Measuring range CO2: 400 ... 5000 ppm
- Measuring range temperature: -10.0 ... 50.0°C / 14 ... 122°F
- Measuring range humidity: 0 ... 99% rh
- Battery operation
- Limit exceeded
- Beep

With the gas leak detector you can ensure the right climate in your office. The gas leak detector measures the CO2 content of the air, the relative humidity and the room temperature. The gas leak detector shows carbon dioxide concentrations up to 9999 ppm, temperatures from -10… 50 °C, and relative humidity values from 20… 95%.

- Large CO2 measuring range up to 9999 ppm
- Traffic light function for carbon dioxide
- Measures temperature and humidity
- Network operation
- Suitable for classrooms, offices, lecture halls
- incl. ISO Calibration Certificate (for CO2 only)

The Gas Detector Gasman-H2 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Detector fulfills all the European and international norms, even ATEX and UL standards.

- Non-rechargeable, 1-year battery
- For H₂ (Hydrogen)
- Dust and water resistant - IP 65/67
- 0... 1000 ppm

 

The Xgard-1-CO is a single-gas gas detector used to warn for gases (Carbon Monoxide, CO, 0 ... 250 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Carbon Monoxide, CO, 0 ... 250 ppm)
- Additional display and alarm station
- ATEX or UL approval

 

With the gas leak detector you can ensure the right climate in your office. The gas leak detector measures the CO2 content of the air, the relative humidity and the room temperature. The gas leak detector shows carbon dioxide concentrations up to 9999 ppm, temperatures from -10… 50 °C, and relative humidity values from 20… 95%.

- Large CO2 measuring range up to 9999 ppm
- Traffic light function for carbon dioxide
- Measures temperature and humidity
- Network operation
- Suitable for classrooms, offices, lecture halls

- Measuring range up to 10000 ppm
- Audible alarm with 85 dB
- Rechargeable battery for mobile use
- Automatic calibration
- For the detection of combustible gases

The Xgard-1-H2S is a single-gas gas sensor used to warn for gases (Hydrogen sulfide, H₂S, 0 ... 25 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Hydrogen sulfide, H₂S, 0 ... 25 ppm)
- Additional display and alarm station
- ATEX or UL approval

The gas detector PCE-WMM 100 consists of a main unit and a remote display. The CO2 gas detector is used to measure carbon dioxide and oxygen in a fixed location. The gas detector has two relays that can be used to control alarm lights or sounders.

- Measuring range CO2: 0 .... 50000 ppm
- Measuring range O2: 0 ... 30 %
- Measuring range temperature: 0 ... 50 °C / 32 ... 122 °F
- Main and remote unit
- Alarm relay
- 4 ... 20 mA analog outputs
- Acoustic alarm

- HCHO measuring range: 0.00 … 5.00 mg/m³
- TVOC measuring range: 0.00 … 9.99 mg/m³
- Temperature measuring range: 0 … 50 °C / 32 … 122 °F
- Humidity measuring range: 0 … 100% RH
- Memory for 5000 measuring points
- Battery and mains operation

The Xgard-1-O2 is a single-gas gas sensor used to warn for gases (Oxygen, O₂, 0 ... 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Oxygen, O₂, 0 ... 25 vol%)
- Additional display and alarm station
- ATEX or UL approval

- Up to 15 gases
- For flammable gases
- 500 mm / 19.6" sensor
- Visual, audible and haptic alarm

Single-use Gas Leak Detector Crowcon Clip and Clip+ with 24- or 36-month lifetime / triple alarm-signaling / no service or calibration necessary / self-testing function / CO, H2S or O2.

- Single-use Gas Leak Detector for O₂
- 24 months continuous operation time / detection time
- Optic, acoustic, and haptic alarm
- Adjustable alarm levels
- 0 ... 30 % Vol.

 

Measuring function
- PM2.5
- Humidity
- Temperature
- CO2
- Air pressure
- Memory: SD card max. 32 GB
- Ideal for workplace monitoring
- Alarm function
- Incl. ISO calibration certificate

Single-use Gas Leak Detector Crowcon Clip and Clip+ with 24- or 36-month lifetime / Triple alarm-signaling / No service or calibration necessary / Self-testing function / CO, H2S or O2.

- Single-use Gas Leak Detector for CO
- 24 months continuous operation time / detection time
- Optic, acoustic, and haptic alarm
- Adjustable alarm levels
- 0 ... 300 ppm

 

This gas leak detector is a compact and reliable measuring device which serves to guarantee the safety of workers in companies. The gas leak detector has a lifespan of 2 years and is prepared for all environmental conditions that occur in industry.

- Measuring range sensor H2S: 0 ... 100 ppm
- Alarm 1: 5 ppm
- Alarm 2: 10 ppm
- Robust housing
- Self test function
- 24 months operating time / detection time

The Xsafe gas detector is a robust gas sensor for flammable gases in the safe range. The Xsafe gas detector is available in different versions, depending on the gases for which it is to be used. The gas measuring device measures the respective flammable gases with the help of an integrated pellistor.

- Different versions available
- For use in safe areas
- Detection by pellistor
- 3-wire 4 ... 20 mA or mV output

- Measuring range up to 10000 ppm
- Audible alarm with 85 dB
- Rechargeable battery for mobile use
- Automatic calibration
- For the detection of combustible gases

- Up to 15 gases
- For flammable gases
- 500 mm / 19.6" sensor
- Visual, audible and haptic alarm