PCE-WMM 50 is a wall-mounted gas leak detector that uses diffusion to monitor carbon dioxide (CO2) gas levels and ambient temperature (ºC / ºF) indoors. This indoor air quality meter features an alarm-activated potential-free contact that can, for example, activate a fan to reduce CO2 gas concentration in the room.

- CO2 gas measurement range: 0 ... 50,000 ppm
- Temperature measurement range: 0 ... +45 ºC / +32 ... +113 ºF
- IP54-rated enclosure on sensor and remote display units
- 2 adjustable alarm thresholds
- 3- to 4-digit remote display (depends on range) 

 

The Xgard-1-PH3 is a single-gas Gassensor used to warn for gases (Phosphine, PH₃, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Phosphine, PH₃, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

PCE-WMM 50-ICA is a wall-mounted carbon dioxide gas leak detector that uses diffusion to monitor carbon dioxide (CO2) gas levels and ambient temperature (ºC / ºF) indoors. This indoor carbon dioxide gas leak detector features an alarm-activated potential-free contact that can, for example, activate a fan to reduce CO2 gas concentration in the room.

- CO2 gas measurement range: 0 ... 50,000 ppm
- Temperature measurement range: 0 ... +45 ºC / +32 ... +113 ºF
- IP54-rated enclosure on sensor and remote display units
- 2 adjustable alarm thresholds
- 3- to 4-digit remote display (depends on range)
- incl. ISO Calibration Certificate

The gas leak detector is specially designed for long-term monitoring of climatic conditions in, for example, offices, classrooms or lecture halls. The gas leak detector is equipped with various sensors.

Parameters / Measuring ranges:
- Temperature: 0 ... +50 ºC / 32 ... 122 ºF
- Ambient humidity: 0 ... 100% RH
- Atmospheric pressure: 300 ... 2000 hPa
- CO2: 0 ... 40000 ppm
- 32 GB data storage
- E-paper display with histogram display
- Good / medium / bad rating
- Battery life: approx. 10 months

The ultrasonic leak detector is used in various areas of industry. For example, the ultrasonic leak detector is used on compressed air, gas, steam and vacuum systems, as well as on refrigeration systems and door seals.

- Working frequency: 40 kHz (± 2 kHz)
- Operating time: >10 hours
- Various attachments
- Color display: 3.5" touch panel TFT
- Soundproof headphones

The Xgard-1-NO2 is a single-gas gas sensor used to warn for gases (Nitrogen dioxide, NO₂, 0 ... 10 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Nitrogen dioxide, NO₂, 0 ... 10 ppm)
- Additional display and alarm station
- ATEX or UL approval

The Xgard-1-O3 is a single-gas Gassensor used to warn for gases (Ozone, O₃, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Ozone, O₃, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

- Fine dust, formaldehyde, humidity, temperature, TVOC
- Particle size channels : PM 2.5 / PM 10
- Measuring range TVOC: 0.00 ... 9.99 mg / m³ (volatile organic compounds)
- Measuring range temperature: -20 ... 70°C / -4 ... 158°F
- Measuring range humidity: 0 ... 100% RH
- Measuring range formaldehyde: 0.00 ... 5.00 mg / m³
- Interface: USB
- For indicative measurements

- Measuring range: 0 ... 4000 ppm
- Measuring range: 10 ... 90% RH
- Measuring range: 0 ... 50 °C / 32 ... 122 °F
- Memory on SD card
- 3 parameters of air quality
- CO2, air temperature and humidity
- incl. ISO Calibration Certificate (for CO2 only)

The Gas Detector AQ-300 Set EF is a high-precision measuring device for measuring the formaldehyde concentration in our circulating air.

- Range Formaldehyde: 0...10 ppm
- High accuracy and functionality
- Alarm function: "High", "Low", Mute
- Alarm output: Transistor output, 150-mA max
- Low Alarm, High Alarm & Control
- Analog output: 0... 5V
- Location ID: Storage of the measuring location

The Xgard-1-NH3 is a single-gas Gas detector used to warn for gases (Ammonia, NH₃, 0 ... 50 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Ammonia, NH₃, 0 ... 50 ppm)
- Additional display and alarm station
- ATEX or UL approval

- Measuring range up to 10000 ppm
- Audible alarm with 85 dB
- Rechargeable battery for mobile use
- Automatic calibration
- For the detection of combustible gases

Gas Detector AQ-500 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Detector can be equipped with four different heads that vary in their measurement range.

- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head EOZ included in delivery (Ozone 0-10 ppm)
- Alarm function
- Data logger

The Gas Detector AQ-500 Set EF is a high-precision measuring device for measuring the formaldehyde concentration in our circulating air.

- Range Formaldehyde: 0...10 ppm
- High accuracy and functionality
- Digital output: RS232 with USB converter
- Data Logger: 8188 values
- PC transfer: Software and data cable included

Gas Detector AQ-500 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Detector can be equipped with four different heads that vary in their measurement range.

- High accuracy and functionality
- Battery operation
- Alarm function
- Data logger

 

 

The chlorine gas detector is a highly accurate measuring device for measuring the chlorine concentration in our ambient air. Furthermore, sensor heads for other gases are also available for the chlorine gas detector, which are automatically recognized when they are plugged into the device.

- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- incl. sensor head for chlorine
- Different sensor heads selectable
- Digital output
- Data logger

- Up to 15 gases
- For flammable gases
- 500 mm / 19.6" sensor
- Visual, audible and haptic alarm

The Xgard-1-SO2 is a single-gas Gassensor used to warn for gases (Sulfur Dioxide, SO₂, 0 ... 10 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Sulfur Dioxide, SO₂, 0 ... 10 ppm)
- Additional display and alarm station
- ATEX or UL approval