The gas leak detector IRmax is a robust gas sensor for flammable gases. The gas leak detector IRmax is delivered ready-calibrated for 1 of 21 different configurations. Of course, the gas leak detector has ATEX approval and can also be used in potentially explosive areas.

- Calibrated for 1 of 21 different configurations
- ATEX approval
- Very reliable, even under the toughest conditions
- Low maintenance and energy saving

The Gas Leak Detector AQ-500 Set EF is a high-precision measuring device for measuring the formaldehyde concentration in our circulating air.

- Range Formaldehyde: 0...10 ppm
- High accuracy and functionality
- Digital output: RS232 with USB converter
- Data Logger: 8188 values
- PC transfer: Software and data cable included

The Gasmaster GM-4 gas leak detector is a reliable, stationary warning device for gases. To connect a gas sensor, the gas measuring device is optionally supplied with a 4 - 20 mA or an mV signal input. The signal input has two alarm relays with which the gas leak detector can control signal lamps/horns or fans, for example.

- 4 inputs for a gas sensor
- Adaptation of gas sensors: O2, O3, CO, CO2, NH3, H2S
- Various combinations possible
- Event logging
- Large, backlit LCD display
- A/V alarm device max. 24V DC 650 mA
- Gas sensors optional

The Gas Leak Detector AQ-300 Set EF is a high-precision measuring device for measuring the formaldehyde concentration in our circulating air.

- Range Formaldehyde: 0...10 ppm
- High accuracy and functionality
- Alarm function: "High", "Low", Mute
- Alarm output: Transistor output, 150-mA max
- Low Alarm, High Alarm & Control
- Analog output: 0... 5V
- Location ID: Storage of the measuring location

This gas leak detector is designed to be a cost-effective solution for applications where protection against a specific combustible or toxic gas is required. The Gasman gas leak detector is a standalone gas detector.

Gas detector for H2S
- Range: 0...100ppm
- Alarm: 5ppm
- Memory for 5000 events
- Data logger for 900 hours of storage with 1 minute intervals
- Interface for calibrating, configuring and reading out the data
- Weight only 130g / 4.5 oz

Gas Leak Detector AQ-500 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Leak Detector can be equipped with four different heads that vary in their measurement range.

- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head EOZ included in delivery (Ozone 0-10 ppm)
- Alarm function
- Data logger

The Xgard-1-H2S is a single-gas gas sensor used to warn for gases (Hydrogen sulfide, H₂S, 0 ... 25 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Hydrogen sulfide, H₂S, 0 ... 25 ppm)
- Additional display and alarm station
- ATEX or UL approval

Gas Leak Detector AQ-500 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Leak Detector can be equipped with four different heads that vary in their measurement range.

- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head OZU included in delivery (Ozone 0-0.15 ppm)
- Alarm function
- Data logger

 

Single-Gas Gas Leak Detector warning for gases (for Carbon Dioxide CO₂), / without display / with signal output for sensors in combination with a stationary equipment to detect gases (with ATEX approval).

- Stationary
- For Carbon Dioxide CO₂
- Additional display and alarm station
- ATEX approved

 

The Xgard IR Gas Leak Detector is a rugged, explosion-proof gas sensor for hydrocarbons or carbon dioxide. The Xgard IR gas leak detector is available in different versions, depending on which gases it is to be used for. The gas leak detector measures the respective gases using a dual wavelength infrared sensor.

- Various finishes available
- Explosion-proof construction with ATEX approval
- Infrared sensor
- 3-wire 4...20 mA output

This gas detector Gas-Pro-2 can gauge with its sensors a maximum of five different gases. Because of this versatility, the gas detector Gas-Pro-2 is ideal for use in a variety of applications, such as near canals, sewage treatment plants, drains, wastewater facilities, dumps and landfills, chemical and oil plants, shipping ports and more.

- Purpose: Personal protection
- Sensor type: CO / H2S / O2 / CH4
- Memory: Yes
- Interface: USB
- Includes suction pump
- Other gas sensors available upon request. (Please email jmu@pce-instruments.com (UK) or jwe@pce-instruments.com (US) for details!)

Gas Leak Detector AQ-500 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Leak Detector can be equipped with four different heads that vary in their measurement range.

- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head OZL included in delivery (0-0.5 ppm)
- Alarm function
- Data logger

 

Gas Leak Detector AQ-300 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Leak Detector can be equipped with four different heads that vary in their measurement range.

- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head OZU included in delivery  (Ozone 0-0.15 ppm)
- Alarm function

The Xgard-1-PH3 is a single-gas Gas Leak Detector used to warn for gases (Phosphine, PH₃, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Phosphine, PH₃, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

Gas Leak Detector AQ-300 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Leak Detector can be equipped with four different heads that vary in their measurement range.

- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head EOZ included in delivery (Ozone 0-10 ppm)
- Alarm function