Products for 'Force Gauge PCE MCWHU15M '

Force Gauge PCE-DDM 5WI-ICA Incl. ISO Calibration

£ 1,156.00

Price excl. VAT &. delivery
2 year Warranty

The force gauge is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the force gauge. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 5,000 kg / 50 kN / 11,023 lb
- Resolution: 2 kg / 20 N
- Minimum load: 40 kg / 88 lbs
- Supplied without remote control indicator
- Incl. ISO calibration certificate

Force Gauge PCE-DFG N 10K-ICA incl. ISO Calibration Certificate

£ 1,362.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-DFG N 10K-ICA force gauge measures both tensile and compressive forces with very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, and the force required to push a button or switch.

- Measuring range: 0 ... 10,000 N / 0 ... 2,248 lbs
- Resolution: 5 N / 1.12 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate

Force Gauge PCE-N50F

£ 610.00

Price excl. VAT &. delivery
2 year Warranty

The force gauge is suitable for panel mounting. This force gauge can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the force gauge.

- Signal input range: 0 ... 20 mV
- Units: g, mN, mlb, Pa, kg, N, Ib, kPa, t, kN, klb, MPa
- For load cells, force sensors, etc.
- Up to 1600 Hz sampling rate
- LCD display

Force Gauge PCE-DFG 2K5 X

£ 921.00

Price excl. VAT &. delivery
2 year Warranty

The force measuring device records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The force gauge is supplied with an external measuring cell and can measure forces of up to 2,500 N.

- Measuring range: 0 ... 2500 N

- Resolution: 1 N

- Accuracy: ±0.05 % F.S.

- 32 GB memory for 30 million measuring points

- USB-C interface

- Graphic display

- Measuring rate: 1 ... 7,200 Hz

Force Gauge PCE-DFG N 20K-ICA incl. ISO Calibration Certificate

£ 1,245.00

Price excl. VAT &. delivery
2 year Warranty

The force gauge PCE-DFG N 20K-ICA measures both tensile forces and compressive forces with a very high resolution and sampling rate. The force gauge helps to determine the yield strengths, the tear-off force and is used wherever acting forces have to be documented.

- Measuring range: 0 ... 20 kN / 20,000 N
- Resolution: 0.002 kN / 2 N
- Accuracy: ± 0.2% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Including ISO calibration certificate

Force Gauge PCE-DFG N 50K-ICA incl. ISO Calibration Certificate

£ 1,273.00

Price excl. VAT &. delivery
2 year Warranty

The force gauge PCE-DFG N 50K-ICA measures both tensile forces and compressive forces with a very high resolution and sampling rate. The force gauge helps to determine the yield strengths, the tear-off force and is used wherever acting forces have to be documented.

- Measuring range: 0 ... 50 kN / 50,000 N
- Resolution: 5 N
- Accuracy: ± 0.2% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Including ISO calibration certificate

Force Gage PCE-DDM 50

£ 3,907.00

Price excl. VAT &. delivery
2 year Warranty

The force gage is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension force gage. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 50,000 kg / 500 kN / 110,231 lb
- Resolution: 20 kg / 200 N / 44 lb
- Minimum load: 400 kg / 881 lb
- Supplied with remote control indicator

Force Gauge PCE-DDM 3WI-ICA incl. ISO Calibration Certificate

£ 1,029.00

Price excl. VAT &. delivery
2 year Warranty

The force gauge is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension force gauge. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 3,000 kg / 30 kN / 6,614 lbs
- Resolution: 1 kg / 10 N
- Minimum load: 10 kg
- Supplied without remote control indicator
- incl. ISO Calibration Certificate

Force Gauge PCE-DFG NF 0.5K-ICA incl. ISO Calibration Certificate

£ 1,193.00

Price excl. VAT &. delivery
2 year Warranty

The force gauge PCE-DFG NF 0.5K-ICA with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.

- Measuring range: 0 ... 0.5 kN / 500 N / 112 lbs

- Resolution: 0.05 N / 0.01 lbs

- Accuracy: ± 0.5% of the measuring range

- Memory for 100 measurements

- USB interface

- Graphic display
- Incl. ISO calibration certificate

Force Gauge PCE-DFG NF 1K-ICA incl. ISO Calibration Certificate

£ 1,193.00

Price excl. VAT &. delivery
2 year Warranty

The force gauge PCE-DFG NF 1K-ICA with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the underside that allow a firm installation.

- Measuring range: 0 ... 1 kN / 1,000 N / 225 lbs

- Resolution: 0.1 N / 0.02 lbs

- Accuracy: ±0.5 % of the measuring range

- Memory for 100 measurements

- USB interface

- Graphic display
- Incl. ISO calibration certificate

Force Gauge PCE-DFG NF 2K-ICA incl. ISO Calibration Certificate

£ 1,193.00

Price excl. VAT &. delivery
2 year Warranty

The force gauge PCE-DFG NF 2K-ICA with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.

- Measuring range: 0 ... 2 kN / 2,000 N / 450 lbs

- Resolution: 0.2 N / 0.04 lbs

- Accuracy: ± 0.5% of the measuring range

- Memory for 100 measurements

- USB interface

- Graphic display
- Incl. ISO calibration certificate

Force Gauge PCE-DFG NF 5K-ICA incl. ISO Calibration Certificate

£ 1,193.00

Price excl. VAT &. delivery
2 year Warranty

The force gauge PCE-DFG NF 5K-ICA with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.

- Measuring range: 0 ... 5 kN / 5,000 N / 1,124 lbs

- Resolution: 0.5 N / 0.1 lbs

- Accuracy: ± 0.5% of the measuring range

- Memory for 100 measurements

- USB interface

- Graphic display
- Incl. ISO calibration certificate

Force Gauge PCE-N45F

£ 534.00

Price excl. VAT &. delivery
2 year Warranty

The force gauge is used to realize individual weighing solutions. The force gauge can be used to connect load cells, force sensors, weighing platforms and other sensors that use strain gauges.

- Signal input range: 0 ... 10 mV / 0 ... 15 mV
- Supply voltage of the measuring cell: 5V
- Power supply: 24V DC
- Relay output
- Potential-free digital input
- Interface and analog output

Force Gauge PCE-DFG N 5K-ICA incl. ISO Calibration Certificate

£ 1,130.00

Price excl. VAT &. delivery
2 year Warranty

The force gauge PCE DFG N 5K-ICA measures both tensile and compressive forces with a very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, and the force required to push a button or switch.

- Measuring range: 0 ... 5,000 N / 0 ... 1,124 lbs
- Resolution: 1 N / 0.22 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate

Force Gage PCE-CSI 30

£ 3,693.00

Price excl. VAT &. delivery
2 year Warranty

The force gage for in-house weighing of up to 30 t. The force gage has a large shackle on the top and a rotatable hook with a safety catch on the underside. The force gage is operated using the infrared remote control supplied.

- Weighing range: 30,000 kg / 66,138 lb
- Resolution: 20 kg / 44 lb
- Minimum load: 100 kg / 220 lb
- Control via remote control
- Stainless steel
- Rotatable hook

PCE-VTS 50-DFG N 500-KIT incl. Force Test Stand and Force Gauge

£ 2,207.00

Price excl. VAT &. delivery
2 year Warranty

Force test stand
The motorised force test stand can be used for vertical tensile and compressive force tests. All force gauges from PCE Instruments can be mounted on the force test stand (if necessary with an adapter plate). The force test stand can withstand a maximum load of 500 N.

- Force range: max. 500 N / 50 kg / 110 lb
- Travel path: max. 270 mm / 10.6"
- Feed speed: 1 ... 500 mm/min
- Manual or automatic procedure

Force gauge
Digital force gauge for tensile force measurement and compressive force measurement up to 500 N. The digital force gauge is for precise measurements with a resolution of 0.1 N.

- Measuring range: 0 ... 500 N
- Accuracy: ± 0.1% of the measuring range
- Tensile and compressive force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
- Memory for 100 measurements
- 220V AC ONLY

Force Gauge PCE-DFG N 2.5K-ICA incl. ISO Calibration Certificate

£ 1,104.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-DFG N 2.5K-ICA force gauge measures both tensile forces and compressive forces with very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, the force required to push a button or switch.

- Measuring range: 0 ... 2,500 N / 0 ... 562 lbs
- Resolution: 1 N / 0.22 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate

Force Gauge PCE-DFG N 1K-ICA incl. ISO Calibration Certificate

£ 1,104.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-DFG N 1K-ICA force gauge measures both tensile forces and compressive forces with very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, and the force required to push a button or switch.

- Measuring range: 0 ... 1,000 N / 0 ... 225 lbs
- Resolution: 0.5 N / 0.11 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate