Digital force gauge PCE-DFG N 500 for tensile force measurement and pressure force measurement up to 500 N. The digital force gauge is for precise measurements with a resolution of 0.1 N.

 

- Measuring range: 0 ... 500 N
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- Pull and pressure force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips

The digital force gauge PCE-DFG N 10 for tensile force measurement and force measurement up to 10 N. The force gauge is a digital dynamometer for precise measurements with a resolution of 0.005 N.

- Measuring range: 0 ... 10 N, 0 ... 2.25 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- Pull and pressure force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips

The force transducer is an electronic closing force measuring device for power-operated windows, sunroofs and tailgates in the motor vehicle sector. Typical areas of application are testing and production in the automotive industry.

- Measuring range: up to 300 N
- Stiffness: 10 N/mm
- Accuracy: +/- 3N or 3% of reading
- PC evaluation software PinchPilot
- Memory for 100 measurements
- Sensor and PC interface
- incl. ISO calibration certificate

The force transducer is an electronic closing force measuring device for power-operated windows, sunroofs and tailgates in the motor vehicle sector. Typical areas of application are testing and production in the automotive industry.

- Measuring range: up to 300 N
- Stiffness: 20 N/mm
- Accuracy: +/- 3N or 3% of reading
- PC evaluation software PinchPilot
- Memory for 100 measurements
- Sensor and PC interface
- Sensor cable lengths selectable in the accessories
- Support of relevant standards – US Standard FMVSS 118
- incl. ISO calibration certificate

The force transducer is an electronic closing force measuring device for power-operated windows, sunroofs and tailgates in the motor vehicle sector. Typical areas of application are testing and production in the automotive industry.

- Measuring range: up to 300 N
- Stiffness: 65 N/mm
- Accuracy: +/- 3N or 3% of reading
- PC evaluation software PinchPilot
- Memory for 100 measurements
- Sensor cable lengths selectable in the accessories
- Support of relevant standards – US Standard FMVSS 118
- incl. ISO calibration certificate

Force Gauge PCE-DFG N 5 for tensile force measurement and force measurement up to 5 N. This force gauge is a digital dynamometer for precise measurements with a resolution of 0.001 N.

- Measuring range: 0 ... 5 N, 0 ... 1.12 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- Pull and pressure force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips

- Measuring range: 0 ... 200 N, 0 ... 44.96 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- Pull and pressure force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips

- Measuring range: 0 ... 20 N, 0 ... 4.5 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- Pull and pressure force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips

The closing force measuring device is an electronic force measuring device for power-operated windows in the motor vehicle sector. Typical areas of application are testing and production in the automotive industry.

- Measuring range: 0 ... 200 N
- Spring stiffness: 20 N/mm
- Accuracy: +/- 3N (0-100N) or +/- 3% (>100N)
- Memory for 100 measurements
- Cable length: 1.5 m / 4.9 ft
- Lithium polymer battery
- Support of relevant standards – US Standard FMVSS 118
- incl. ISO calibration certificate

The closing force measuring device is an electronic force measuring device for power-operated windows in the motor vehicle sector. Typical areas of application are testing and production in the automotive industry.

- Measuring range: 0 ... 260 N
- Spring stiffness: 65 N/mm
- Accuracy: +/- 3N (0-100N) or +/- 3% (>100N)
- Memory for 100 measurements
- Cable length: 1.5 m / 4.9 ft
- Lithium polymer battery
- Support of relevant standards – US Standard FMVSS 118
- incl. ISO calibration certificate

Our motorized force test stand can be coupled and operated in a wide variety of versions with our force gauges, the PCE series. The motorized force test stand lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the motorized force test stand offers the operator the most precise equality of test bench and sample.

- Force range: max. 5000 N / 500 kg / 1100 lbs
- Travel: max. 300 mm / 11.8"
- Feed speed: 30 ... 230 mm/min / 1.18 ... 9.05 in/min
- Manual or automatic procedure
- incl. length measuring device: -150 … 150 mm / -5.9 … 5.9"
- incl. software
- incl. force gauge PCE-DFG N 5K (0 ... 5000 N)

*** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***

The original BIA class 1 closing force measuring device is an electronic closing force measuring device for rail vehicle and bus doors and sliding steps. The elaborate design combines precision with practical robustness and ensures accurate measured values even after years of use in harsh environments.

- Measuring range: 25 ... 310 N
- Stiffness: 10 N/mm
- Accuracy: +/- 3N or 3% of reading
- Memory for 100 measurements
- Sensor and PC interface
- Applicable standards: EN 14752:2005, VDV 111, VDV 157, 2001/85/EG
- incl. evaluation software PinchPilot
- incl. display unit SEB2
- incl. ISO calibration certificate