The calibratable stainless steel floor scale PCE-SD… SST is calibrated for its location of use according to calibration class III before delivery and is then approved for two years in all of Europe for the legal-for-trade movement of goods, calibration class III. The stainless steel floor scale is made of solid corrosion and acid-resistant steel.

- Weighing range: 300 kg
- Readability: 0.1 kg
- Calibration included
- Verifiable M III

The floor scale is a convenient way to save time and shorten work processes. This floor scale can transport and weigh loads up to 2000 kg. For this purpose, four load cells are installed in the forks of the floor scale, which form a weighing system with the evaluation unit.

- Weighing range: 2000 kg / 4409 lb
- Readability: 1 kg / 2.2 lb
- Measurement uncertainty: ± 0.2% full scale
- Summing function
- Piece counting function
- incl. ISO calibration certificate

- Weighing range : 6000 kg
- Readability : 2 kg
- Calibration included
- Calibratable M III

The floor scale is supplied calibrated and is intended for stationary use with its solid construction. Due to the robust design and the large platform, this calibrated weighing platform is particularly suitable for weighing large objects.

 

- Weighing range : 6000 kg
- Readability : 2 kg
- Taring range: over the entire weighing range
- Includes initial verification
- Calibratable M III

- incl. ISO-Calibration Certificate

- Weighing range : 3000 kg
- Readability : 1 kg
- Calibration included
- Calibratable M III

- Weighing range : 1500 kg
- Readability : 0.5 kg
- Calibration included
- Calibratable M III

- Weighing range : 6000 kg
- Readability : 2 kg
- Calibration included
- Calibratable M III

The Electrical Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This Electrical Tester also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.

- PCE-830 + PCE-6802 amp clamp (1000 A)
- Electrical conductor pick-up: 55 mm / 2.2 in diameter
- Range selection: manual (10 A, 100 A, 1000 A)
- Clamp dimensions: 244 x 97 x 46 mm / 9.6 x 3.8 x 1.8 in
- Incl. ISO calibration certificate

The floor scale is supplied calibrated and is intended for stationary use with its solid construction. Due to the robust design and the large platform, this calibrated weighing platform is particularly suitable for weighing large objects.

 

- Weighing range : 3000 kg
- Readability : 1 kg
- Taring range: over the entire weighing range
- Includes initial verification
- Calibratable M III

- Weighing range: 1500 kg
- Readability: 0.5 kg
- Calibration included
- Verifiable M III

The calibrated floor scale is ideal if you do not want to install a platform scale into the ground. Simply set up the floor scale in the hall, fix the floor scale and the access ramp with the fixing plates included in the scope of delivery, connect the control terminal to the socket and you can start weighing.

- Weighing range: 2000 kg
- Readability: 1 kg
- Calibration included
- Verifiable M III

The Electrical Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Electrical Tester also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.

- PCE-830 + PCE-6801 amp clamp (100 A)
- Electrical conductor pick-up: 30 mm diameter
- Range selection: manual (1 A, 10 A, 100 A)
- Clamp dimensions: 210 x 62 x 36 mm
- Incl. ISO calibration certificate

The stainless steel floor scale is made entirely of high quality, acid resistant stainless steel. The weighing cells installed in the stainless steel floor scale have a protection class of IP68.

 

- Weighing range : 3000 kg
- Readability : 1 kg
- Taring range: over the entire weighing range
- Includes initial verification
- Calibratable M III

The Electrical Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This Electrical Tester also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.

- PCE-830 + PCE-3007 flexible amp clamp (3000A)
- Electrical conductor pick-up: 170 mm / 6.7 in diameter
- Minimum radial curve: 35 mm / 1.4 in
- Length of electrical conductor: 610 mm / 24 in
- Sampling rate: 2 sec.
- Memory size: 512 kB / max. 52,420 data (1 phase)
- Incl. ISO calibration certificate

The sound level data logger is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The sound level data logger is a class 2 device and is equipped with an octave band frequency filter. The sound level data logger can optionally be upgraded with a 1/3 octave band filter.

- Accuracy class 2
- 1/1 octave band included
- 1/3 octave band optional
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- Including class II sound calibrator
- Including calibration certificate for sound level meter
- Including calibration certificate for sound calibrator

- Weighing range : 3000 kg
- Readability : 1 kg
- Calibration included
- Calibratable M III

- Weighing range : 1500 kg
- Readability : 0.5 kg
- Calibration included
- Calibratable M III