Products for 'Filtrate Dry Residue Meter PCE PH 25 ICA incl. ISO Calibration Certificate '

Clamp on Tester PCE-830-3-ICA incl. ISO Calibration Certificate

£ 2,554.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-830-3 Clamp on Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This Clamp on Tester also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.

- PCE-830 + PCE-3007 flexible amp clamp (3000A)
- Electrical conductor pick-up: 170 mm / 6.7 in diameter
- Minimum radial curve: 35 mm / 1.4 in
- Length of electrical conductor: 610 mm / 24 in
- Sampling rate: 2 sec.
- Memory size: 512 kB / max. 52,420 data (1 phase)
- Incl. ISO calibration certificate

Force Gauge PCE-DDM 20-ICA incl. ISO Calibration Certificate

£ 2,820.00

Price excl. VAT &. delivery
2 year Warranty

The force gauge is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the force gauge. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 20,000 kg / 200 kN / 44,092 lb
- Resolution: 10 kg / 100 N / 22 lb
- Minimum load: 200 kg / 440 lb
- Supplied with remote control indicator
- incl. ISO Calibration Certificate

Ultrasonic Flow Meter PCE-TDS 75-ICA incl. ISO Calibration Certificate

£ 1,699.00

Price excl. VAT &. delivery
2 year Warranty

The ultrasonic flow meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this flow meter. The sensors from the ultrasonic flow meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.

- Measuring range: ± 0.03 ... ± 5 m / s
- Measuring accuracy: ± 1% of the measured value
- Pipe diameter: 25 ... 1200 mm (1 ... 48 in)
- Interface: RS232 & RS485
- Relay output
- incl. ISO Calibration Certificate

pH Meter PCE-PH 28L-ICA incl. ISO Calibration Certificate

£ 271.00

Price excl. VAT &. delivery
2 year Warranty

The pH meter PCE-PH 28L-ICA is equipped with a flat electrode membrane which is installed in a shaft. So with the pH meter you can measure samples of viscous media in test tubes. This feature makes it possible to use very small volumes of liquids in beakers or test tubes. As a result, the pH meter can be used not only in the field but also in the laboratory.

- Calibration points: 1, 2 or 3
- Measuring range: -1 ... 15 pH
- Temperature measuring range: 0.0 ... 60°C / 32 ... 140°F
- Flat pH electrode with long shaft
- Automatic temperature compensation
- For small sample quantities
- incl. ISO Calibration Certificate

Food pH Meter PCE-228M-ICA incl. ISO calibration certificate

£ 503.00

Price excl. VAT &. delivery
2 year Warranty

The food pH meter PCE-228M-ICA is a very easy-to-use pH handheld meter for food. The pH value and the temperature can be read on the large LCD display or saved on the SD card (Excel file).

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± (0.02 pH + 2d)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS -232
- Suitable for foods such as sausage, meat, cheese...
- Incl. ISO calibration

Carbon Dioxide Meter PCE-PQC 35EU Incl. Calibration Certificate

£ 5,549.00

Price excl. VAT &. delivery
2 year Warranty

The Carbon Dioxide Meter PCE-PQC 35EU is characterized by its small size and easy wall mounting. The fixed installation of the carbon dioxide meter ensures high-precision air quality studies.

- Measuring range: 0.3 ... 25 μm
- Measurement channel sizes: 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 μm
- Counting efficiency: 50% at 0.3 μm, 100% at > 0.45 μm according to JIS
- CO2 Sensor: 0 ... 5000 ppm
- PID Sensor: 0 ... 50 ppm
- Ethernet, USB
- Includes temperature and humidity sensor
- Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

Ultrasonic Flow Meter PCE-TDS 100HMHS-ICA incl. ISO Calibration Certificate

£ 2,305.00

Price excl. VAT &. delivery
2 year Warranty

The ultrasonic flow meter is required as part of a control measurement or to quickly determine the flow in a pipeline and is a portable / easy-to-install measuring system. The ultrasonic flow meter works according to the transit time difference method. The measuring principle of the flow meter is quite simple.

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 50 … 720 mm / DN 20 …108 mm
- Sensor temperature range: 32 ... 320°F
- Sensor installation: V, Z
- Incl. sensors TDS-HM and TDS-HS on rails
- Incl. ISO Calibration Certificate

Clamp-on Ultrasonic Flow Meter PCE-TDS 100HMHS-ICA incl. ISO Calibration Certificate

£ 2,305.00

Price excl. VAT &. delivery
2 year Warranty

The Clamp-on Ultrasonic Flow Meter is required as part of a control measurement or to quickly determine the flow in a pipeline and is a portable / easy-to-install measuring system. The Clamp-on Ultrasonic Flow Meter works according to the transit time difference method. The measuring principle of the flow meter is quite simple.

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe sizes: 50 … 720 mm (approx. 1.9 … 28")
20 …108 mm (approx. 0.8 … 4.2")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, Z
- Incl. sensors TDS-HM and TDS-HS on rails
- Incl. ISO Calibration Certificate

Accelerometer PCE-VM 22-ICA incl. ISO Calibration Certificate

£ 2,534.00

Price excl. VAT &. delivery
2 year Warranty

The accelerometer has a measuring range of 0 ... 200 m/s² for acceleration. In addition to acceleration, the accelerometer can also perform speed, displacement, frequency and an ISO 18016-3 measurement.

- Acceleration
- Velocity
- Displacement
- Frequency
- Tachometer
- Infrared temperature measurement
- 4 GB data memory
- FFT analysis and wave view of the vibration
- incl. ISO Calibration Certificate

Electrical Tester PCE-830-1-ICA incl. ISO Calibration Certificate

£ 2,554.00

Price excl. VAT &. delivery
2 year Warranty

The Electrical Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Electrical Tester also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.

- PCE-830 + PCE-6801 amp clamp (100 A)
- Electrical conductor pick-up: 30 mm diameter
- Range selection: manual (1 A, 10 A, 100 A)
- Clamp dimensions: 210 x 62 x 36 mm
- Incl. ISO calibration certificate

Moisture Meter PCE-MA 100-ICA incl. ISO Calibration Certificate

£ 1,095.00

Price excl. VAT &. delivery
2 year Warranty

The moisture meter PCE-MA 100-ICA allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the moisture meter dries the material to be weighed, and then calculates the moisture content from the weight difference.

- Testing or weighing capacity: 110 g / 3.88 oz
- Readability: 1 mg / 0.001 g / 0.01 %
- Adjustable drying temperature and time
- incl. ISO Calibration Certificate

Vibration Analyzer PCE-VM 22-ICA incl. ISO Calibration Certificate

£ 2,534.00

Price excl. VAT &. delivery
2 year Warranty

The vibration analyzer has a measuring range of 0 ... 200 m/s² for acceleration. In addition to acceleration, the vibration analyzer can also perform speed, displacement, frequency and an ISO 18016-3 measurement.

- Acceleration
- Velocity
- Displacement
- Frequency
- Tachometer
- Infrared temperature measurement
- 4 GB data memory
- FFT analysis and wave view of the vibration
- incl. ISO Calibration Certificate

Analytical Balance PCE-MA 60XT-ICA incl. ISO calibration certificate

£ 2,296.00

Price excl. VAT &. delivery
2 year Warranty

The precision analytical balance allows moisture determinations with a resolution of 0.001%. The operation of this analytical balance is very simple. Set the drying temperature, place the sample and start drying.

- Weighing capacity: 60 g

- Readability: 0.1 mg = 0.0001 g / 0.001%.

- Drying temperature up to 160°C

- Live graph of moisture content

- Display: Moisture content % / Dry content % / ATRO % / Weight

- Product database for drying parameters

- RS232 / USB interface

- Storage as TXT file directly on USB stick possible
- incl. ISO calibration certificate

- Attention to the power supply when ordering!

Benchtop Scale PCE-MA 60XT-ICA incl. ISO calibration certificate

£ 2,296.00

Price excl. VAT &. delivery
2 year Warranty

The benchtop scale allows moisture determinations with a resolution of 0.001%. The operation of this digital balance is very simple. Set the drying temperature, place the sample and start drying.

- Weighing range: 60 g

- Readability: 0.1 mg = 0.0001 g / 0.001%.

- Drying temperature up to 160°C

- Live graph of moisture content

- Display: Moisture content % / Dry content % / ATRO % / Weight

- Product database for drying parameters

- RS232 / USB interface

- Storage as TXT file directly on USB stick possible
- incl. ISO calibration certificate

- Attention to the power supply when ordering!

LAB Scale PCE-MA 60XT-ICA incl. ISO calibration certificate

£ 2,296.00

Price excl. VAT &. delivery
2 year Warranty

The precision LAB scale enables moisture determinations with a resolution of 0.001 %. The operation of this LAB scale is very simple. Set the drying temperature, place the sample on the balance and start drying.

- Weighing range: 60 g

- Readability: 0.1 mg = 0.0001 g / 0.001%.

- Drying temperature up to 160°C

- Live graph of moisture content

- Display: Moisture content % / Dry content % / ATRO % / Weight

- Product database for drying parameters

- RS232 / USB interface

- Storage as TXT file directly on USB stick possible
- incl. ISO calibration certificate

- Attention to the power supply when ordering!

Laboratory Balance PCE-MA 60XT-ICA incl. ISO calibration certificate

£ 2,296.00

Price excl. VAT &. delivery
2 year Warranty

The precision laboratory balance enables moisture determinations with a resolution of 0.001 %. The operation of this laboratory balance is very simple. Set the drying temperature, place the sample on the balance and start drying.

- Weighing range: 60 g

- Readability: 0.1 mg = 0.0001 g / 0.001%.

- Drying temperature up to 160°C

- Live graph of moisture content

- Display: Moisture content % / Dry content % / ATRO % / Weight

- Product database for drying parameters

- RS232 / USB interface

- Storage as TXT file directly on USB stick possible
- incl. ISO calibration certificate

- Attention to the power supply when ordering!

Current Clamp PCE-830-3-ICA incl. ISO Calibration Certificate

£ 2,554.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-830-3 Current Clamp is used for measuring one to three phases of electrical quantities for alternating current (AC). This Current Clamp also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.

Ultrasonic Flow Meter PCE-TDS 200 SM-ICA incl. ISO-Calibration Certificate

£ 2,505.00

Price excl. VAT &. delivery
2 year Warranty

The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- incl. 4 sensors

- Pipe size:
DN 50 ... 700 / 57 ... 720 mm,
DN 15 ... 100 / 20 ... 108 mm

- Temperature resistance: -30 ... 160 °C

- for different media

- for different pipe materials

- Measuring parameters: Flow velocity,
volume flow and volume

- Interface: USB

- Data logger: 10 million measuring points

- LiPo battery
- incl. ISO-Calibration Certificate