- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± (0.02 pH + 2d)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS -232
- Especially for measurements in mud and soil

- Measuring range: 0 ... 362.6 psi, 0 ... 25 bar
- Resolution: 0.145 psi, 0.01 bar
- Scaled bar graph
- Measurable media: gases, water
- incl. ISO Calibration Certificate

- Calibration points: 1, 2 or 3
- Measuring range: -1 ... 15 pH
- Temperature measuring range: 0.0 ... 60°C / 32 ... 140°F  
- Flat pH electrode with long shaft
- Automatic temperature compensation
- For small sample quantities
- incl. ISO Calibration Certificate

- Adjustable units: mg / l, ppm
- Bluetooth connection with app
- 503 nm / 570 nm / 620 nm LED
- Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)
Parameters:

- 6 in 1 pH tester
- Measuring range: 0 ... 2000 μS, 2 ... 20 mS
- 3 point pH calibration
- Exchangeable electrodes
- Automatic electrode detection

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± (0.02 pH + 2d)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS -232
- pH meter for soil

The environmental meter is a very easy to use handheld pH meter and allows a fast and reliable pH measurement of wine. The environmental meter has a three-point calibration which is performed automatically. Very well suited to the field of viticulture.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7, or 10
- especially for wine, beer and other solutions with low conductivity
- incl. ISO Calibration Certificate

The environmental meter is a useful handheld pH meter for food. The pH can be read off the large LCD display. pH measurement in foodstuffs production and processing is a ubiquitous method of measurement. It is needed in many downstream process steps and has a direct influence on the tactile, sensory and hygienic quality of foodstuffs.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7, or 10
- Food: Meat etc.
- Including ISO calibration certificate

The environmental meter is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The environmental meter is a class 2 device and is equipped with an octave band frequency filter. The environmental meter can optionally be upgraded with a 1/3 octave band filter.

- Accuracy class 2
- 1/1 octave band included
- 1/3 octave band optional
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- Including class II sound calibrator
- Including calibration certificate for sound level meter
- Including calibration certificate for sound calibrator

With this HVAC meter, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the HVAC meter consists of braided tungsten.

- Diameter: Ø6mm / 0.23"
- Cable length: 5m / 16.4 ft
- Camera direction: 0°
- Resolution: 1MP
- Focusing range: 5 ... 50 mm / 0.19 ... 1.96"
- 7" touch screen for easy operation
- replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission

With this HVAC meter, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the HVAC meter consists of braided tungsten.

- Diameter: Ø2.8mm / 0.11"
- Cable length: 2m / 6.5 ft
- Camera direction: 0°
- Resolution: 160,000 pixels
- Focusing range: 5 ... 50 mm / 0.19 ... 1.96"
- 7" touch screen for easy operation
- Replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission

The pH meter PCE-228HTE is a mobile device for measuring pH, mV, °C and °F, complete with SD card memory and an RS-232 interface. This particular model includes a special pH electrode suitable for temperatures up to 100°C / 212°F.

- Measurement range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ±(0.02 pH + 2 digits)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS-232
- Incl. special pH electrode: for temperatures to 100°C / 212°F
- Incl. ISO Calibration Certificate

- Measuring range: 0.0 ... 14.0 pH
- Resolution: 0.01 pH
- Accuracy: ± 0.02 pH
- 100 points Datalogger
- (ATC) in the range 0 ... 80°C / 32 ... 176°F
- Waterproof to IP 67
- Incl. ISO calibration certificate

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7, or 10
- Applications: Shampoo, pastes, Colors, cosmetics
- Incl. ISO calibration certificate

Measurement of pH in cosmetics with an environmental meter is a priority test that should be carried out not only to ensure the conformity of the pH of the product with the pH of the skin, but also to ensure good quality, suitable viscosity, colour, scent and to ensure the shelf life of the cosmetics.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7, or 10
- Applications: Shampoo, pastes, paints, cosmetics

The environmental tester is used to measure the pH of viscous media. Thanks to the flat pH electrode, the environmental tester is particularly well suited for the measurement of the pH value of sludges or viscous media such as oils and creams. The measuring range of the environmental tester ranges from -1 ... 15 pH, and it has an internal calibration function with up to 3 interpolation points.

- Calibration points: 1, 2 or 3
- Measuring range: -1 ... 15 pH
- Temperature measuring range: 0.0 ... 60°C / 32 ... 140°F
- Flat pH electrode
- Automatic temperature compensation
- For viscous liquids
- incl. ISO Calibration Certificate