Vibration Meter PCE-VM 5000-KIT-ICA incl. ISO Calibration Certificate
£ 2,936.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The 4-channel PCE-VM 5000 Vibration Meter performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the vibration measuring device is able to record vibrations at different points of the component to be tested.


- Frequency range: 10 Hz ... 1 kHz
- Measurement of acceleration, velocity and displacement
- Connection of up to 4 sensors simultaneously
- Data storage on SD card
- Including 2 additional sensors for vibration
- Including ISO Calibration Certificate

Clamp-on Ultrasonic Flow Meter PCE-TDS 200+ SR-ICA incl. ISO-Calibration Certificate
£ 3,040.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The Clamp-on Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the Clamp-on Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
- Sensor for pipe diameters DN 15 ... 100 / 20 ... 108 mm
- Temperature measurement up to 1800 °C
- for different media
- for different pipe materials
- Measuring parameters: flow velocity, volume flow, volume
  temperature, heat output and heat quantity
- Interface: USB
- Cost display
- Data logger: 32 GB memory capacity (10 million measuring points)
- LiPo battery
incl. ISO-Calibration Certificate
Ultrasonic Flow Meter PCE-TDS 200+ SR-ICA incl. ISO-Calibration Certificate
£ 3,040.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
Pipe size: DN 15 ... 100 / 20 ... 108 mm
- Temperature measurement up to 1800 °C
- for different media
- for different pipe materials
- Measuring parameters: flow velocity,
  volume flow, volume
  temperature, heat output and heat quantity
- Interface: USB
- Cost display
- Data logger: 10 million measuring points
- LiPo battery
incl. ISO-Calibration Certificate
Portable Ultrasonic Flow Meter PCE-TDS 200+ SR-ICA incl. ISO Calibration Certificate
£ 3,040.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The Portable Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the Portable Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
- Sensor for pipe diameters DN 15 ... 100 / 20 ... 108 mm
- Temperature measurement up to 1800 °C
- for different media
- for different pipe materials
- Measuring parameters: flow velocity, volume flow, volume
  temperature, heat output and heat quantity
- Interface: USB
- Cost display
- Data logger: 32 GB memory capacity (10 million measuring points)
- LiPo battery
- incl. ISO Calibration Certificate
HVAC Meter PCE-TG 150 HT-ICA incl. ISO Calibration Certificate
£ 953.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The HVAC thickness meter can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the HVAC thickness meter.

- Measuring range: 1.20 ... 300.0 mm  / 0.04 ... 11.81"
- Accuracy: ±0.5% of measured value + 0.05 mm
- Memory capacity: 1500 measured values
- Calibration reference on housing
- High temperature probe: -10 ... 350 °C / 14 ...  662 °F
- incl. ISO Calibration Certificate
Profilometer PCE-RT 2300-ICA Incl. ISO Calibration Certificate
£ 2,251.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The profilometer PCE-RT 2300 is used to measure the roughness of surfaces. The PCE-RT 2300 profilometer tester has a detachable motorized sensor that allows the material tester to determine the surface profile roughness even on small or narrow profiles. Free software download for remote test control and data save to Windows PC and memory for 100 records of internal data.

- Large measuring range:  Rz: 0.02 μm ... 320 μm; Ra, Rq: 0.005 μm ... 32 μm
- Accuracy of ± 10% and repeat accuracy of ± 6%
- Touchscreen configuration and Android/printer bluetooth connectivity 
- Sensor has diamond test head with 90-degree cone angle
- Optional sensors and extension rod for small holes and curved surfaces 
Incl. ISO calibration certificate
Clamp-on Ultrasonic Flow Meter PCE-TDS 200+ M-ICA incl. ISO Calibration Certificate
£ 2,875.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The Clamp-on Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the Clamp-on Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
- Sensor for pipe diameters DN 50 ... 700 / 57 ... 720 mm
- Temperature resistance: -30 ... 160 °C
- Temperature measurement up to 1800 °C
- for different media
- for different pipe materials
- Measuring parameters: flow velocity, volume flow, volume
  temperature, heat output and heat quantity
- Interface: USB
- Cost display
- Data logger: 32 GB memory capacity (10 million measuring points)
- LiPo battery
incl. ISO Calibration Certificate
Ultrasonic Flow Meter PCE-TDS 200+ M-ICA incl. ISO Calibration Certificate
£ 2,875.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the
ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
Pipe size: DN 50 ... 700 / 57 ... 720 mm
- Temperature resistance: -30 ... 160 °C
- Temperature measurement up to 1800 °C
- for different media
- for different pipe materials
- Measuring parameters: flow velocity,
  volume flow, volume
  temperature, heat output and heat quantity
- Interface: USB
- Cost display
- Data logger: 10 million measuring points
- LiPo battery
incl. ISO Calibration Certificate
Power Meter PCE-360-ICA incl. ISO Calibration Certificate
£ 1,753.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.


- Measuring range: 10 ... 999.9 V
- AC voltage AC
- Alternating current AC
- Active power
- Power factor
- Phase angle
- Frequency
- Harmonic measurement
- Data memory: 512 kB 
  (non-volatile memory)
- incl. 4 current clamps / tapping terminals
- Standards: IP 30 / IEC 61 010, 600 V / CAT III
incl. ISO Calibration Certificate 
incl. ISO Calibration Certificate 

Material Tester PCE-RT 2300-ICA Incl. ISO Calibration Certificate
£ 2,251.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The material tester PCE-RT 2300 is used to measure the roughness of surfaces. The PCE-RT 2300 material tester has a detachable motorized sensor that allows the material tester to determine the surface roughness even on small or narrow profiles. Free software download for remote test control and data save to Windows PC and memory for 100 records of internal data.

- Large measuring range:  Rz: 0.02 μm ... 320 μm; Ra, Rq: 0.005 μm ... 32 μm
- Accuracy of ± 10% and repeat accuracy of ± 6%
- Touchscreen configuration and Android/printer bluetooth connectivity 
- Sensor has diamond test head with 90-degree cone angle
- Optional sensors and extension rod for small holes and curved surfaces 
Clamp Meter PCE-360-ICA incl. ISO Calibration Certificate
£ 1,753.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.


- Measuring range: 10 ... 999.9 V
- AC voltage AC
- Alternating current AC
- Active power
- Power factor
- Phase angle
- Frequency
- Harmonic measurement
- Data memory: 512 kB 
  (non-volatile memory)
- incl. 4 current clamps / tapping terminals
- Standards: IP 30 / IEC 61 010, 600 V / CAT III
incl. ISO Calibration Certificate 
incl. ISO Calibration Certificate 

Environmental Meter PCE-BPH 10-ICA incl. ISO Calibration Certificate
£ 711.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
With the environmental meter it is possible to carry out quick and precise analysis of the pH concentration of liquid samples. For example, with the environmental meter it is possible to check alkaline solutions, water, wine, milk and many other liquids for the pH content.

- pH measuring range: -2.000 ... +19.999 pH
- Resolution: 0.1 / 0.01 pH
- Measuring range mV: -1999.9 ... +1999.9 mV
- Resolution: 1 mV
- Temperature measuring range: -10 ... +110 °C / 14 ... 230 °F
- Resolution: 0.1 °C
- USB and Bluetooth interface
- Memory for 300 measured values
- Live viewing software
- 3 point calibration
- incl. ISO Calibration Certificate
Clamp-on Ultrasonic Flow Meter PCE-TDS 200+ S-ICA incl. ISO-Calibration Certificate
£ 2,875.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The Clamp-on Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the Clamp-on Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
- Sensor for pipe diameter DN 15 ... 100 / 20 ... 108 mm
- Sensor dimensions: 91 x 52 x 44 mm
- Temperature measurement up to 1800 °C
- for different media
- for different pipe materials
- Measuring parameters: flow velocity, volume flow, volume
  temperature, heat output and heat quantity
- Interface: USB
- Cost display
- Data logger: 32 GB memory capacity (10 million measuring points)
- LiPo battery
incl. ISO-Calibration Certificate
Ultrasonic Flow Meter PCE-TDS 200+ S-ICA incl. ISO-Calibration Certificate
£ 2,875.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the
ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
Pipe size: DN 15 ... 100 / 20 ... 108 mm
- Sensor dimensions: 91 x 52 x 44 mm
- Temperature measurement up to 1800 °C
- for different media
- for different pipe materials
- Measuring parameters: flow velocity,
  volume flow, volume
  temperature, heat output and heat quantity
- Interface: USB
- Cost display
- Data logger: 10 million measuring points
- LiPo battery
incl. ISO-Calibration Certificate
Data Logger with USB Interface PCE-428-EKIT-ICA incl ISO Calibration Certificate
£ 3,693.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The data logger with USB interface PCE-428-EKIT-ICA, from the field of environmental measurement technology, is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The data logger with USB interface is equipped with an octave band frequency filter. Optionally, the data logger with USB interface can be upgraded with a 1/3 octave band filter. The additional kit for outdoor sound measurement makes it possible to measure outdoor noise with a data logger with USB interface over a long period of time, even in the rain.

 

- Accuracy class 2 
- A, B, C & Z frequency rating
- Fast, Slow, Pulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- incl. outdoor noise level meter kit PCE-4xx-EKIT
- Outdoor measurement of sound and noise
- incl. ISO calibration certificate

Clamp on Tester PCE-PA 8500-ICA incl. ISO-Calibration Certificate
£ 3,302.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The clamp on tester redefines standards in electrical measurement technology, offering a comprehensive range of features for precise and detailed measurements. The clamp on tester allows accurate measurements of electrical voltage, current, frequency, harmonics, and starting currents. In addition, precise power and energy measurements can be performed, enabling accurate monitoring and optimization of energy consumption.

- Voltages: 1 ... 1000 V
- Current: 15 ... 3000 A AC
- Graphical representation of waveform and vector graphics
- Data logger with 8 GB storage
- LAN and USB data interface
- Includes flexible current clamps
- Compliance with standards: IEC61000-4-30, 61000-4-15, 
  61000-4-7, EN50160
- incl. ISO-Calibration Certificate
Environmental Meter PCE-HT 114-ICA Incl. ISO Calibration Certificate
£ 256.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The refrigerator environmental meter PCE-HT 114 has a temperature and humidity sensor on 2 m / 6.6 ft cable. The PCE-HT 114 environmental meter records the temperature and humidity in the interior of the refrigerator and simultaneously displays it via the LCD display.

Measuring function
- Temperature: -40 ... 125°C / -40 ... 257°F (external)
- Humidity: 0 ... 100% rh (external)
- Memory for 25,920 readings
- Saves as PDF
- Incl. ISO calibration certificate
Ultrasonic Flow Meter PCE-TDS 200+ L-ICA incl. ISO Calibration Certificate
£ 2,964.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the
ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
Pipe size: DN 300 ... 6000 mm
- Sensor dimensions: 91 x 52 x 44 mm
- Temperature measurement up to 1800 °C
- for different media
- for different pipe materials
- measuring parameters: flow velocity,
  volume flow, volume
  temperature, heat output and heat quantity
- Interface: USB
- Cost display
- Data logger: 10 million measuring points
- LiPo battery
- incl. ISO Calibration Certificate