Products for 'Electrical Tester PCE HDM 20 '

£ 6,654.00

Price excl. VAT &. delivery
2 year Warranty

The melt flow index tester is used for rapid testing of the melt mass flow rate of plastics. The material flow tester device is designed for both incoming goods inspection and continuous production monitoring.

- Melting rate: 0.1 to 400.0 g / 10 min
- Heating temperature: 120 ... 400°C / 248 ... 752°F
- Measuring accuracy temperature: ± 0.2°C / 0.36°F
- Resolution: 0.1°C / 0.18°F
- Large 7" TFT touch display
- Already pre-set materials
- Various weights included
- Standards: ISO1133-1997, ASTM 1238-04C, GB / T3682-2000

Electric Vehicle EVSE Tester PCE-EVSE 310+

£ 325.00

Price excl. VAT &. delivery
2 year Warranty

The electric vehicle EVSE tester is for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This VDE tester can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.

- PE pre-test

- Proximity-Pilot PP / Control-Pilot CP

- Simulation CP error "E" / PE error

- Mains socket for measuring purposes

- Safety measuring sockets

- incl. type 2 plug and adapter to type 1

Electric Vehicle EVSE Tester PCE-EVSE 310

£ 325.00

Price excl. VAT &. delivery
2 year Warranty

- PE pre-test

- Proximity Pilot PP / Control Pilot CP

- Simulation CP fault "E" / PE fault

- Mains socket for measuring purposes

- Safety measuring sockets

- Optional adapter to type 1

Ultrasonic Flow Tester PCE-UFM 20

£ 823.00

Price excl. VAT &. delivery
2 year Warranty

With our ultrasonic flow tester, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The ultrasonic flow tester is suitable for small pipes with a diameter of DN20 / 3/4" and various pipe materials such as steel, copper, aluminum, and plastics.

- Measurement Range: 0.1 ... 5 m/s

- Resolution: 0.001 m/s

- Accuracy: 2%

- Pipe Size: DN20 / 3/4"

- Display Type: OLED

- Analog Output: 4 ... 20mA

Electrical Tester PCE-123-ICA incl. ISO Calibration Certificate

£ 623.00

Price excl. VAT &. delivery
2 year Warranty

PCE-123 is a electrical tester used to test and calibrate a variety of measuring instruments. Offering a high level of accuracy for an affordable price, this easy-to-use electrical tester provides electrical (mA, mV, V and frequency in Hz) and temperature (in °C or °F) output signals, making the electrical tester useful in a wide range of applications.

- DC current: 4 - 20-mA (1 kΩ load, 24 V loop supply) with 1 μA resolution
- DC voltage: 0 - 100.00 mV, 0 - 1.000V, 0 - 12.000V
- K, J, E, T type thermocouples (°C or °F)
- Frequency: 1 - 62,500 Hz
- Incl. ISO Calibration Certificate

Ultrasonic / UCI Hardness Tester PCE-5000

£ 5,251.00

Price excl. VAT &. delivery
2 year Warranty

PCE-5000 is a portable hardness tester that uses the ASTM A1038 ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 in. Non-destructive testing produces microscopic indentation.

- Measurement according to ASTM A1038 ultrasonic contact impedance (UCI) method
- Measurement units: Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units
- Measurement ranges: 61-85.6 HRA, 41-100 HRB, 20.3-68 HRC, 85-650 HB, 50-999 HV, 255-2180 MPa (N/mm²)
- Accuracy: ± 1.5 HR, ± 3% HB, ± 3% HV, Repeatability: ± 0.3%
- Memory size: 1,000 groups for measurement data and 20 groups for calibration data
- Different probe types (also automatic motorized probes) available

Electrical Tester PCE-MCM 10

£ 254.00

Price excl. VAT &. delivery
2 year Warranty

The electrical tester has a measurement range of ±99.9 mA DC. With an accuracy of 0.3% of rdg. +8 digits, the electrical tester is a particularly accurate measuring instrument. In order to conveniently perform measurements with the electrical tester, the current clamp itself is connected to a 1 meter / 3.3 ft cable.

- Measuring range 1: ±20.99 mA DC

- Measuring range 2: ±21.0 … ±99.9 mA DC

- Diameter of clamp opening: Ø5 mm

- Detachable electrical tester with 1 m / 3.3 ft cable

Electrical Tester PCE-MCM 10-ICA incl. ISO Calibration Certificate

£ 392.00

Price excl. VAT &. delivery
2 year Warranty

- Measuring range 1: ±20.99 mA DC

- Measuring range 2: ±21.0 … ±99.9 mA DC

- Diameter of clamp opening: Ø5 mm

- Detachable electrical tester with 1 m / 3.3 ft cable

- Incl. ISO Calibration Certificate

Paint Testing Equipment PCE-CSM 20

£ 4,695.00

Price excl. VAT &. delivery
2 year Warranty

The paint testing equipment is used for high-quality color measurement. Featuring a single 8 mm aperture and including SCI and SCE specular modes for industrial color measuring applications, the paint testing equipment offers a long battery life, a 4-color lamp and an easy-to-use portable design. The paint testing equipment covers the full spectrum from 400 to 700 nm in 10 nm increments. Camera/illumination locating for small samples.

- Measuring geometry: 8° / d

- Includes Yellowness, Whiteness, Opacity, Staining and other color indexes

- USB cable and software for data transfer

- 2,000 reference standard memory, 20,000 sample memory
- Light source: D65, A, C, D50
- Color ranges: CIE L*a*b, XYZ, Yxy, LCh, CIE LUV, Hunter L*A*B

Clamp on Tester PCE-PA 8500-ICA incl. ISO-Calibration Certificate

£ 3,302.00

Price excl. VAT &. delivery
2 year Warranty

The clamp on tester redefines standards in electrical measurement technology, offering a comprehensive range of features for precise and detailed measurements. The clamp on tester allows accurate measurements of electrical voltage, current, frequency, harmonics, and starting currents. In addition, precise power and energy measurements can be performed, enabling accurate monitoring and optimization of energy consumption.

- Voltages: 1 ... 1000 V

- Current: 15 ... 3000 A AC

- Graphical representation of waveform and vector graphics

- Data logger with 8 GB storage

- LAN and USB data interface

- Includes flexible current clamps

- Compliance with standards: IEC61000-4-30, 61000-4-15,

61000-4-7, EN50160

- incl. ISO-Calibration Certificate

Electric Vehicle EVSE Tester PCE-EVSE 300

£ 290.00

Price excl. VAT &. delivery
2 year Warranty

Electromobility is playing an increasingly important role. An important point here are the charging stations for electric vehicles. To check the permanently installed charging stations, also called wall boxes, special electric vehicle EV tester are required to check the function, the protective devices and the insulation.

- CP and PP simulation
- Direct connection for wallboxes
- Adapter with charging plugs Type 1 and Type 2
- CP simulation (communication line) A, B, C, D, error

Environmental Tester PCE-BPH 20-ICA incl. ISO Calibration Certificate

£ 845.00

Price excl. VAT &. delivery
2 year Warranty

The table-top environmental tester can be used to quickly and precisely analyze liquid samples. Thus, for example, water, alkalis, milk, wine and many other liquids can be checked for their quality with the environmental tester.

Measuring range:
- pH, mV, TDS
- Temperature, conductivity
- Salinity, resistance
- Large 7" touchscreen
- Bluetooth and USB interfaces
- 3 point calibration
- incl. ISO Calibration Certificate (for PH value only)

Hardness Tester PCE-3000ULS

£ 3,280.00

Price excl. VAT &. delivery
2 year Warranty

The hardness tester can be used to quickly check the hardness of components even when installed. The hardness tester impresses with a large measuring range, easy handling, robust design and temperature resistance down to -20°C.

- Measurement according to UCI method and rebound method

- Testing of HRC, HV, HB

- Measuring direction 360 °

- Large LCD

- USB interface

- incl. UCI probe & type D Leebsonde

Material Tester PCE-3000ULS

£ 3,280.00

Price excl. VAT &. delivery
2 year Warranty

The material tester can be used to quickly check the hardness of components even when installed. The material tester impresses with a large measuring range, easy handling, robust design and temperature resistance down to -20°C.

- Measurement according to UCI method and rebound method

- Testing of HRC, HV, HB

- Measuring direction 360 °

- Large LCD

- USB interface

- incl. UCI probe & type D Leebsonde

Electrical Tester PCE-CLT 10

£ 222.00

Price excl. VAT &. delivery
2 year Warranty

The electrical tester PCE-CLT 10 is a multifunctional device which enables high accuracy and fast measurement results. If used appropriately, the electrical tester can be used to measure cables that are installed and are still to be installed.

- Measuring range cable length: 5 ... 3000 m / 16.4 ... 9842.5 ft
- Measurement Units: m, ft
- Resolution: 0.1 m / 0.3 ft
- Measuring principle: time domain reflectometer
- 20 pre-set cable types

HVAC Meter PCE-PIC 20

£ 1,765.00

Price excl. VAT &. delivery
2 year Warranty

The HVAC meter PCE-PIC 20 is an ideal tool for any service technician who needs to visually inspect pipes and ducts. The HVAC meter PCE-PIC 20 has a 23 mm / 0.9 in camera head, which is attached to a glass fiber push cable.

- Cable diameter / head diameter: 23 mm / 0.9 in
- 20 m / 66 ft push cable
- Electronic meter counting
- Battery and mains operation
- Waterproof up to 20 m / 66 ft

Electrical Tester PCE-IT55

£ 194.00

Price excl. VAT &. delivery
2 year Warranty

Electrical Tester for insulation resistance up to 2000 MΩ

- Measuring ranges AC voltage: 0 ... 750V
- Resolution AC voltage: 1V
- Accuracy AC voltage: ± 1.2% ± 10 dgts
- Complies with IEC1010-1, CAT III 1000V
- Large display with backlight
- Individual measurement and duration measurement

Electrical Tester PCE-CTI 10-ICA incl. ISO Calibration Certificate

£ 385.00

Price excl. VAT &. delivery
2 year Warranty

The electrical tester is the ideal measuring device for measuring voltages up to 1500 V AC/DC and currents up to 1000 A AC/DC. The current measurement with the electrical tester is inductive. To do this, the supply line is placed in the electrical tester.

- Measuring range: 0 ... 1500 V AC/DC
- Free app for Android and iOS
- Data logging for up to 100,000 measured values
- Inrush current measurement
- Insulation categories: CAT IV 600 V, CAT III 1000 V, CAT II 1500 V
- incl. ISO Calibration Certificate