A tension dynamometer is based on the principle that the force acting on the pressure adapter is measured hydraulically. The hydraulic pressure generated is displayed by the tension dynamometer on a scale in Newtons.

- Measuring range: 0… 2,500 N / 562 lbs
- Resolution: 100 N / 22.5 lbs
- Measuring accuracy: ±1.95% f. R.
- with 100 cm hydraulic hose
- External analogue display

A tension dynamometer is based on the principle that the force acting on the pressure adapter is measured hydraulically. The hydraulic pressure generated is displayed by the tension dynamometer on a scale in Newtons.

- Measuring range: 0… 1,000 N / 225 lbs
- Resolution: 20 N / 4.5 lbs
- Measuring accuracy: ±2.5% of the measuring range
- with 100 cm hydraulic hose
- External analogue display

- Measuring range: 0… 25,000 N / 5,620 lbs
- Resolution: 1000 N / 224.8 lbs
- Measuring accuracy: ±1.95% f. R.
- with 100 cm hydraulic hose
- External analogue display

The tension load cell is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension load cell. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 50,000 kg / 500 kN / 110,231 lb
- Resolution: 20 kg / 200 N / 44 lb
- Minimum load: 400 kg / 881 lb
- Supplied without remote control indicator

The rotary viscometer uses the mechanical resistance of any liquid to measure viscosity using rotational movement of a spindle. This results in a torque that is recognized by the rotary viscometer and converted into a viscosity value. With an accuracy of ± 1.0%, the rotary viscometer is a very precise measuring device despite the high measuring range of 10 … 2,000,000 cP (mPa*s).

- Viscosity measuring range: 10 ... 2,000,000 cP
- Accuracy: ± 1% of full scale (with Newtonian liquid)
- Rotation speeds: 0.3, 0.6, 1.5, 3, 6, 12, 30, 60 rpm
- Various viscosity units can be displayed (mPa*s, Pa*s, dPa*s, cP, P, cPs)
- Includes 4 spindles in the kit, an optional spindle (L0) measures down to 1 cP

The tension dynamometer is a microprocessor controlled dynamometer with fast and accurate readout of tensile and compressive forces in N, Kg and lb. The display of the tension dynamometer is easily readable by the large numbers. The tension dynamometer is equipped with an internal load cell for tensile and compression tests.

- Measuring range: 5... 500 N / 1.1 ... 112 lbs
- Resolution: 0.1 N / 0.02 lbs
- Different shaped measuring adapters
- Evaluation via USB interface
- Device for mounting on test stands
- incl. ISO Calibration Certificate

A tension dynamometer is based on the principle that the force acting on the pressure adapter is measured hydraulically. The hydraulic pressure generated is displayed by the tension dynamometer on a scale in Newtons.

- Measuring range: 0… 2,500 N / 562 lbs
- Resolution: 100 N / 22.5 lbs
- Measuring accuracy: ±1.95% f. R.
- Incl. ISO calibration certificate

- Measuring range: 0… 25,000 N / 5,620 lbs
- Resolution: 1000 N / 224.8 lbs
- Measuring accuracy: ±1.95% f. R.
- Incl. ISO calibration certificate

This tension dynamometer is a tensile / compressive force gauge. This traction / compression tension dynamometer has an internal load cell. It is a portable traction / compression tension dynamometer that can be installed in a force measurement stand.

- Measuring range: 0.5 ... 50 N / 0.1 ... 11 lbs
- Resolution: 0.01 N / 0.002 lbs
- Evaluation via USB interface
- Different shaped measuring adapters
- Device for mounting on test stands
- incl. ISO Calibration Certificate

A tension dynamometer is based on the principle that the force acting on the pressure adapter is measured hydraulically. The hydraulic pressure generated is displayed by the tension dynamometer on a scale in Newtons.

- Measuring range: 0… 1,000 N / 225 lbs
- Resolution: 20 N / 4.5 lbs
- Measuring accuracy: ±2.5% of the measuring range
- Incl. ISO calibration certificate

The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces and nitrided surfaces.

- Probe is 10 Newtons / 2.2 lbf force, 50 and 98 N probes are options
- Tests HRC, HRB, HV, HB, MPa
- Memory function via SD card and included PC software
- Large color LCD display with back lighting

The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces and nitrided surfaces.

- Probe is 10 Newtons / 2.2 lbf force, 50 and 98 N probes are options
- Tests HRC, HRB, HV, HB, MPa
- Memory function via SD card and included PC software
- Large color LCD display with back lighting

The Ultrasonic Contact Impedance (UCI) Metal Hardness Tester PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces and nitrided surfaces.

- Probe is 10 Newtons / 2.2 lbf force, 50 and 98 N probes are options
- Tests HRC, HRB, HV, HB, MPa
- Memory function via SD card and included PC software
- Large color LCD display with back lighting

The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces and nitrided surfaces.

- 10 Newtons UCI probe / 2.2 lbf force, 50 and 98 N probes are options
- Tests HRC, HRB, HV, HB, MPa
- Memory function via SD card and included PC software
- Large color LCD display with back lighting