- IR temperature measuring range: -33 ... 500°C / -27.4 ... 932°F
- Accuracy: ± 2% of v. Mw. or ± 2°C / 3.6°F
- Measured value display optionally in °C or °F
- Measurement spot ratio 9: 1
- Incl. ISO calibration certificate

The thermometer is intended for stationary measurement of relative humidity and temperature and direct display on a large display. This thermometer consists of an LED display (100 mm high) and is protected according to IP 54.

- Temperature measuring range: 0 ... +60 °C (Celsius only)
- Humidity measuring range: 10 ... 95 % RH
- Up to 50 m (164 ft) reading distance
- External sensor (wired)

The PCE-VA 20 is a versatile Digital Multimeter for determining environmental conditions such as wind, temperature and humidity. It is additionally used to test heating, ventilation and air conditioning / cooling (HVAC) systems. This triple thermometer-hygrometer-anemometer device has a 10 cm / 3.9" Ø fan impeller and a clear backlit LCD. Available functions include display hold, average / maximum / minimum value, auto shutdown, low-battery warning, and metric / imperial choice.

- Measures air flow velocity, volume flow, relative humidity, air temperature, dew
  point temperature and wet-bulb temperature
- Air flow velocity range: 0.2 ... 30 m/s (39.4 ... 5905.5 fpm)
- Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±
  (3% of measured value + 0.3 m/s) when more than 20 m/s
- Resolution: 0.1
- Incl. ISO Calibration Certificate 

The thermometer is a measuring device for stationary measurement of relative humidity and temperature. This thermometer consists of an LED seven-segment display with a digit height of 100 mm, which enables you to read it very well even at a distance of up to 50 m.

- Temperature measuring range: 0 ... +60 °C (Celsius only)
- Humidity measuring range: 10 ... 95 % RH
- Up to 50 m (164 ft) reading distance
- External sensor (wired)
- Voltage supply: 230 V AC
- with analogue output 4 ... 20 mA

- Measuring range: 0.5 ... 25 μm
- Measurement channel sizes: 0.5, 0.7, 1.0, 3.0, 5.0, 10.0 μm
- Counting efficiency: 50% at 0.5 μm, 100% at > 0.75 μm according to JIS
- Interface: Ethernet, USB
- Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

The device clamp force gauge PCE-4PCFM is a 4-point force gauge that can ensure the optimal clamp force distribution. The force gauge is used on device clamps for white and brown goods to avoid damage caused by incorrect force distribution.

- Measuring range: 30,000 N / 3,000 kg / 3 t
- Resolution: 10N / 1kg
- Measurement uncertainty: ±0.5% full scale
- Position of the 4 sensors is adjustable
- Touch display including printer
- Optional: Measurement data storage on USB stick

- Infrared measuring range: -40 ... 300°C / -40 ... 572°F
- Sensor measuring range: -40 ... 300°C / -40 ... 572°F
- Charging station with micro USB cable
- Bluetooth interface
- incl. ISO-Calibration Certificate

This digital thermometer with outside sensor is a real all-rounder. The wireless digital thermometer with outside sensor is easy to assemble based on the instructions provided. You do not have to be a professional to operate the wireless digital thermometer and outside sensors. The weather data of the digital thermometer with outside sensor for different parameters are sent up to 100 meters by radio signal to the main station.

- 2 displays
- Indoor temperature in Celsius or Fahrenheit
- Outside temperature in Celsius or Fahrenheit
- Indoor air humidity / outdoor air humidity
- Air pressure gauge in inHg or hPa
- Absolute or relative air pressure display selectable
- Precipitation indication in mm or inch
- Precipitation indicator for 1 hour, 24 hours, 1 week, 1 month
- Wind speed in mph, km / h, m / s, knots ...
- Wind direction indicator
- Wind chill temperature gauge
- Weather forecast, trend indicator, storm warning
- and much more...

PCE-VA 20-SET is a Digital Multimeter with capture hoods for assessing and balancing heating, ventilation and air conditioning or cooling (HVAC) systems. This combined hygrometer-anemometer-thermometer possesses a 10 cm / 3.9" diameter fan impeller and a bright backlit LCD. The functions of the device incorporate display hold, mean value, max value, min value, battery-saving auto shutdown, low-battery display, and a choice between metric and imperial units.

- Measures air flow velocity, volume flow, relative humidity, air temperature, dew
  point temperature and wet-bulb temperature
- Air flow velocity range: 0.2 ... 30 m/s (39.4 ... 5905.5 fpm)
- Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of
  measured value + 0.3 m/s) when more than 20 m/s
- Resolution: 0.1°C / 0.18°F
- Includes 2 x capture hoods (1 x round 210 mm / 8.3 in Ø, 1 x square 346 x 346
  mm / 13.6 x 13.6 in)

Measuring function
- Temperature: -40 ... 125°C / -40 ... 257°F (external)
- Humidity: 0 ... 100% rh (external)
- Memory for 25,920 readings
- Saves as PDF

- Temperature range from -50 ... 1850°C / -58 ... 3362°F
- Adjustable emissivity
- Short response time of 150 ms
- With thermocouple input
- Bluetooth interface

- IR resolution: 220 x 160 pixels
- Measuring range: -20 ... 300°C / -4  ... 572°F
- Thermal sensitivity: 70 mK
- Memory: 3 GB memory for more than 20,000 pictures
- 5 different color palettes
- Hot and cold spot location
- Picture in Picture function

- incl. ISO-calibration certificate

This digital thermometer with outside sensor is a real all-rounder. The wireless digital thermometer with outside sensor is easy to assemble based on the instructions provided. You do not have to be a professional to operate the wireless digital thermometer and outside sensors. The weather data of the digital thermometer with outside sensor for different parameters are sent up to 100 meters by radio signal to the main station.

- Indoor temperature in Celsius or Fahrenheit
- Outside temperature in Celsius or Fahrenheit
- Indoor air humidity / outdoor air humidity
- Air pressure gauge in inHg or hPa
- Absolute or relative air pressure display selectable
- Precipitation indication in mm or inch
- Precipitation indicator for 1 hour, 24 hours, 1 week, 1 month
- Wind speed in mph, km / h, m / s, knots ...
- Wind direction indicator
- Wind chill temperature gauge
- Weather forecast, trend indicator, storm warning
- and much more...

This digital thermometer is a two-channel measuring instrument. The digital thermometer offers a wide range of measurement options.

- K-type thermometer with dual input
- Temperature range: -210 ... 1372 °C / -346 ... 2501 °F
- Direct measurement / differential measurement (T1-T2)
- Electronic zero offset
- Readings in °C, °F or Kelvin (K)
- incl. ISO Calibration Certificate