The infrared thermometer has a resolution of 320 x 240 pixels. With a measuring range of -20 ... 300 °C, the infrared thermometer already covers a large temperature range. The emission value of the infrared thermometer can be set to carry out measurements on different surfaces.

- Measuring range: -20 ... 300 °C / -4 ... 572 °F
- Infrared and real image resolution: 320 x 240 pixels
- Picture in picture function
- USB-C interface
- Refresh rate: 9Hz
- Storage for about 20,000 images

- IR resolution: 220 x 160 pixels
- Measuring range: -20 ... 300°C / -4  ... 572°F
- Thermal sensitivity: 70 mK
- Memory: 3 GB memory for more than 20,000 pictures
- 5 different color palettes
- Hot and cold spot location
- Picture in Picture function

- Function: convert analog signal into usable value
- Input signal: 4 ... 20 mA, ±20 mA DC, 0 ... 10 V DC, ±10 V DC
- Display range: -1999 ... 9999
- Digit height: 100 mm / 3.9"
- Number of outputs: 2
- Voltage supply: 85 ... 265 V AC / 120 ... 370 V DC

- Function: convert analog signal into usable value
- Input signal: 4 ... 20 mA, ±20 mA DC, 0 ... 10 V DC, ±10 V DC
- Display range: -1999 ... 9999
- Digit height: 100 mm / 3.9"
- Number of outputs: 2
- Voltage supply: 11 ... 36 V DC

PCE-VA 20 is a Digital Multimeter for testing heating, ventilation and air conditioning or cooling (HVAC) systems. This combination anemometer-hygrometer-thermometer features a 10 cm / 3.9" Ø fan impeller, easy-to-read backlit LCD, and functions such as display hold, average value, maximum value, minimum value, battery-saving automatic power off, low-battery indicator, and metric or imperial unit selection.

- Measures air flow velocity, volume flow, relative humidity, air temperature, dew
  point temperature and wet-bulb temperature
- Air flow velocity range: 0.2 ... 30 m/s (39.4 ... 5905.5 fpm)
- Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of
  measured value + 0.3 m/s) when more than 20 m/s
- Resolution: 0.1

 

The infrared thermometer has a resolution of 320 x 240 pixels. With a measuring range of -20 ... 300 °C, the infrared thermometer already covers a large temperature range. The emission value of the infrared thermometer can be set to carry out measurements on different surfaces.

- Measuring range: -20 ... 300 °C / -4 ... 572 °F
- Infrared and real image resolution: 320 x 240 pixels
- Picture in picture function
- USB-C interface
- Refresh rate: 9Hz
- Storage for about 20,000 images
- incl. ISO Calibration Certificate

Three-Phase Digital Multimeter with network analyzer / power and energy meter with data logger. The three-phase harmonic Analyzer (Graphic Power Quality Analyzer) is used for single-phase or three-phase measurements of active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics. This clamp meter is a perfect tool for all energetic measurements. It is delivered manufacturer calibrated and can be certified to ISO or standards.

- Real-time test, register and measurement of voltage and current (real and effective) 
- Measures power factor and phase angle, frequency, energy, active, reactive and apparent power 
  (single-phase or three-phase in symmetrical networks). 
- Max. conductor diameter: 55 mm / 2.2 in
- Records up to 50,000 records

- IR resolution: 160 x 120 pixels
- Measuring range: -20 ... 450°C / -4  ... 842°F 
- Thermal sensitivity: 70 mK
- Memory: 3 GB memory for more than 20,000 pictures
- 5 different color palettes
- Hot and cold spot location
- Picture in Picture function

- Temperature range from -50 ... 1850°C / -58 ... 3362°F
- Adjustable emissivity
- Short response time of 150 ms
- With thermocouple input
- Bluetooth interface

- Temperature measuring range: 0.0 … 50.0 °C
- Humidity measuring range: 0.0 ... 99.9% RH
- Connection of up to four external sensors
- Analog 4 ... 20 mA input signal
- Wall mounting
- incl. ISO Calibration Certificate

The dual infrared thermometer is used for fast surface temperature measurement. The two laser points of the infrared thermometer PCE-895 mark the exact measuring point and thus offer excellent assistance with the temperature measurement. 

 

- Temperature measurement up to 1600°C / 2912°F
- Cross laser thermometer
- K-Type or infrared measurement
- Optical resolution: 60:1
- Adjustable emissivity
- Can be calibrated
- Suitable for long-term measurements

- IR resolution: 220 x 160 pixels
- Measuring range: -20 ... 300°C / -4  ... 572°F
- Thermal sensitivity: 70 mK
- Memory: 3 GB memory for more than 20,000 pictures
- 5 different color palettes
- Hot and cold spot location
- Picture in Picture function
- incl. ISO Calibration Certificate

- Temperature measuring range: 32.0… 122.0 °F
- Humidity measuring range: 0.0 ... 99.9% RH
- Connection of up to four external sensors
- Analog 4 ... 20-mA input signal
- Wall mounting
- Incl. ISO calibration certificate

- Infrared measuring range: -35 ... 330°C / -31 ... 626°F
- Type of measurement puncture sensor measuring range: -20 ... 260°C / -4 ... 500°F
- Measurement spot ratio: 4: 1
- For frozen, cold and hot foods

- IR resolution: 160 x 120 pixels
- Measuring range: -20 ... 450°C / -4  ... 842°F 
- Thermal sensitivity: 70 mK
- Memory: 3 GB memory for more than 20,000 pictures
- 5 different color palettes
- Hot and cold spot location
- Picture in Picture function
- incl. ISO Calibration Certificate

PCE-123 is a digital multimeter used to test and calibrate a variety of measuring instruments. Offering a high level of accuracy for an affordable price, this easy-to-use multimeter provides electrical (mA, mV, V and frequency in Hz) and temperature (in °C or °F) output signals, making the multimeter useful in a wide range of applications.

- DC current: 4 - 20 mA (1 kΩ load, 24 V loop supply) with 1 μA resolution
- DC voltage: 0 - 100.00 mV, 0 - 1.000 V, 0 - 12.000 V
- K, J, E, T type thermocouples (°C or °F)
- Frequency: 1 - 62,500 Hz