The tension dynamometer is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension dynamometer. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 20,000 kg / 200 kN / 44,092 lb
- Resolution: 10 kg / 100 N / 22 lb
- Minimum load: 200 kg / 440 lb
- Supplied with remote control indicator
- incl. ISO Calibration Certificate

- Vibration acceleration: 0 ... 200 m/s², RMS and peak-peak
- Vibration speed: 0 ... 200 mm/s, RMS
- Vibration distance: 0 ... 2000 μm, peak-peak
- Real-time FFT analysis
- Direct evaluation according to DIN ISO 10816

The digital thermometer has a resolution of 320 x 240 pixels. With a measuring range of -20 ... 300 °C, the digital thermometer already covers a large temperature range. The emission value of the digital thermometer can be set to carry out measurements on different surfaces.

- Measuring range: -20 ... 300 °C / -4 ... 572 °F
- Infrared and real image resolution: 320 x 240 pixels
- Picture in picture function
- USB-C interface
- Refresh rate: 9Hz
- Storage for about 20,000 images

- Cable diameter / head diameter: 23 mm / 0.9 in
- 20 m / 66 ft push cable
- Electronic meter counting
- Battery and mains operation
- Waterproof up to 20 m / 66 ft

- Cable diameter / head diameter: 23 mm / 0.9 in
- 20 m / 66 ft push cable
- Electronic meter counting
- Battery and mains operation
- Waterproof up to 20 m / 66 ft

- Cable diameter / head diameter: 23 mm / 0.9 in
- 20 m / 66 ft push cable
- Electronic meter counting
- Battery and mains operation
- Waterproof up to 20 m / 66 ft

- Cable diameter / head diameter: 23 mm / 0.9 in
- 20 m / 66 ft push cable
- Electronic meter counting
- Battery and mains operation
- Waterproof up to 20 m / 66 ft

Measuring function
- DC DC
- AC voltage AC (TRMS)
- AC + DC TRMS voltage
- DC DC
- AC AC (TRMS)
- 4 ... 20-mA %
- AC AC / Rogowski coil
- Resistance
- Frequency
- Duty cycle
- Capacity
- Temperature / thermocouple

- Vibration acceleration: 0 ... 200 m/s², RMS and peak-peak
- Vibration speed: 0 ... 200 mm/s, RMS
- Vibration distance: 0 ... 2000 μm, peak-peak
- Real-time FFT analysis
- Direct evaluation according to DIN ISO 10816

The Mini Digital Multimeter has been designed to detect, indirectly, AC/DC current and frequency. The Mini Digital Multimeter has a flashlight integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact.

- AC current (50/60 Hz): 200 A / 0.1 A or 100-mA / ±3.0% + 8 digits
- DC current:200 A / 0.1 A or 100-mA / ±2.8% + 8 digits
- AC test voltage (without contact):100 VAC to 600 VAC 50 / 60 Hz
- Frequency (3 ranges): 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

 

- Function: convert analog signal into usable value
- Input signal: 4 ... 20 mA, ±20 mA DC, 0 ... 10 V DC, ±10 V DC
- Display range: -1999 ... 9999
- Digit height: 100 mm / 3.9"
- Number of outputs: 2
- Voltage supply: 85 ... 265 V AC / 120 ... 370 V DC

- Function: convert analog signal into usable value
- Input signal: 4 ... 20 mA, ±20 mA DC, 0 ... 10 V DC, ±10 V DC
- Display range: -1999 ... 9999
- Digit height: 100 mm / 3.9"
- Number of outputs: 2
- Voltage supply: 11 ... 36 V DC

- Vibration acceleration: 0 ... 200 m/s², RMS and peak-peak
- Vibration speed: 0 ... 200 mm/s, RMS
- Vibration distance: 0 ... 2000 μm, peak-peak
- Real-time FFT analysis
- Direct evaluation according to DIN ISO 10816

- Vibration acceleration: 0 ... 200 m/s², RMS and peak-peak
- Vibration speed: 0 ... 200 mm/s, RMS
- Vibration distance: 0 ... 2000 μm, peak-peak
- Real-time FFT analysis
- Direct evaluation according to DIN ISO 10816

Measuring function:
- AC voltage: 750V
- DC voltage: 1000V
- Resistance: 4 MΩ
- Continuity test: 400 Ω
- Electrical safety: CAT III 600V

PCE-CPT 20 is a cupping tester, or surface coating flexibility testing device, used for testing the formability, ductility, adhesion and elongation of paints, lacquers, varnishes, powder and protective coatings on sheet metal. Used in manufacturing production, paint shop and quality control applications, the PCE-CPT 20 cupping tester aids in determining coating strength, durability and elasticity.

- Tests surface coatings on metal sheets 0.3 to 1.25 mm thick
- Provides a maximum depression force of 2500 N
- Offers a display resolution of 0.01 mm