With this HVAC meter, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the HVAC meter consists of braided tungsten.

• Endoscope cable length: approx. 2 m / 6.5 ft
• Diameter: 3.8mm / 0.15"
• Camera resolution 160,000 pixels each
• Viewing angle front camera 120°, side camera 90°
• Focusing distance 5 … 50 mm / 0.19 … 1.96" each
• Camera head length: 42 mm / 1.6"
• Bending radius at 90° 35 mm / 1.3"
• Live images from both cameras side by side
• 7" touch screen for easy operation
• Replaceable battery with status display
• Storage of recording on SD card
• Motor with endoscope cable can be changed quickly
• HDMI connection for direct image transmission

The PCE-DDO 10 hardness tester is an ergonomic device to check Shore O hardness in gum. It has been designed with a high quality. The PCE-DDO 10 hardness tester is mainly used for soft gums. If the material thickness is not enough, it should be tightened on the back with the same material in order to increase its thickness.

• Handheld device
• For Shore O measurements
• Single and Serial-Measurements
• Data transfer to PC

The digital thermometer is specially designed for long-term monitoring of climatic conditions in, for example, offices, classrooms or lecture halls. The digital thermometer is equipped with various sensors.

Parameters / Measuring ranges:

• Temperature: 0 … +50 ºC / 32 … 122 ºF
• Ambient humidity: 0 … 100% RH
• Atmospheric pressure: 300 … 2000 hPa
• CO2: 0 … 40000 ppm
• 32 GB data storage
• E-paper display with histogram display
• Good / medium / bad rating
• Battery life: approx. 10 months

PCE-313A is a combination Digital Thermometer hygrometer used to measure the relative humidity (% RH) and temperature (°C / °F) of the air. Ideal for use in evaluating heating, ventilation and air conditioning (HVAC) system performance, this digital thermo-hygrometer also has a port for connecting a type-K thermocouple.

• Relative humidity: 5 … 95% r.H.
• Temperature: 0 … 50°C / 32 … 122°F
• Type K: -50 … 1300°C / -58 … 2372°F
• Calculated dew point: -25.3 … 48.9°C / -13.5 … 120°F
• Wet bulb temperature: -21 … 50°C / -5.8 … 122°F
• Memory: SD card (1 … 16 GB)

The PCE-313 S Digital Thermometer has been designed for professional use in fields such as the air-conditioning sector. The PCE-313 S Digital Thermometer determines both relative humidity and ambient temperature. The PCE-313 S Digital Thermometer can be connected to type K thermo-elements to detect, for instance, the temperature of a wall by means of a surface probe.

• Relative humidity: 5 … 95% r.H.
• Temperature: 0 … 50°C / 32 … 122°F
• Type K: -50 … 1300°C / -58 … 2372°F
• Calculated dew point: -25.3 … 48.9°C / -13.54 … 120°F

With this HVAC meter, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the HVAC meter consists of braided tungsten.

• Diameter: Ø6mm / 0.23"
• Cable length: 5m / 16.4 ft
• Camera direction: 0°
• Resolution: 1MP
• Focusing range: 5 … 50 mm / 0.19 … 1.96"
• 7" touch screen for easy operation
• replaceable battery with status display
• Storage of recording on SD card
• Motor with endoscope cable can be changed quickly
• HDMI connection for direct image transmission

With this HVAC meter, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the HVAC meter, consists of braided tungsten.

• Endoscope cable length: approx. 2 m / 6.5 ft
• Diameter: 3.8mm / 0.15"
• Front camera with resolution: 1,000,000 pixels
• Front camera viewing angle 120°
• Focus 10 … 100 mm / 0.39 … 3.9"
• Movable camera head 46 mm / 1.8" long
• Bending radius approx. 35 mm / 1.3" at 90°
• 7" touch screen for easy operation
• replaceable battery with status display
• Storage of recording on SD card
• Motor with endoscope cable can be changed quickly
• HDMI connection for direct image transmission

With the PCE-890U Digital Thermometer, measurements of surface temperatures can be carried out quickly and easily. Since the digital thermometer uses infrared radiation for temperature measurement, no direct contact with the measuring object is required. The digital thermometer makes it easy to measure objects from a distance that are difficult to access.

• Measuring range: -50 … 1150°C / -58 … 2102°F
• Accuracy: ± 1.5% ± 2°C / 3.6°F (0 … 500°C / 32 … 932°F)
• Resolution: 0.1°C / 0.18°F (<1000°C)
• Emission level: 0.1 … 1

An electrostatic measurement is particularly important to check whether surfaces, components or the human body are electrostatically charged. Such electrostatic charges can be detected with the electromagnetic radiation detector.

• Measuring range: ±60 kV DC
• Acoustic signal when the measured value is exceeded
• Temperature and humidity display
• Laser for aligning the measuring device