Electric Vehicle EVSE Tester PCE-EVSE 310+
£ 325.00
Price excl. VAT &. delivery
2 year Warranty
Topseller
The electric vehicle EVSE tester is  for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This VDE tester can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.  

- PE pre-test
- Proximity-Pilot PP / Control-Pilot CP
- Simulation CP error "E" / PE error
- Mains socket for measuring purposes
- Safety measuring sockets
incl. type 2 plug and adapter to type 1
Car Measuring Device PCE-EVSE 310
£ 325.00
Price excl. VAT &. delivery
2 year Warranty
Topseller
The Car Measuring Device is  for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This VDE tester can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.  

- PE pre-test
- Proximity Pilot PP / Control Pilot CP
- Simulation CP fault "E" / PE fault
- Mains socket for measuring purposes
- Safety measuring sockets
- Optional adapter to type 1
Thermometer PCE-G1
£ 974.00
Price excl. VAT &. delivery
2 year Warranty
The thermometer is intended for stationary measurement of relative humidity and temperature and direct display on a large display. This thermometer consists of an LED display (100 mm high) and is protected according to IP 54.

- Temperature measuring range: 0 ... +60 °C (Celsius only)
- Humidity measuring range: 10 ... 95 % RH
- Up to 50 m (164 ft) reading distance
- External sensor (wired)
Air Velocity Meter PCE-WSAC 50-310
£ 378.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The Air Velocity Meter PCE-WSAC 50-310 can be used in different fields of application. In use, the air velocity meter carries out measurements from the smallest wind movements. The air velocity meter  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 24 V DC
- Input signal: 4 ... 20 mA
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate
Electric Vehicle EVSE Tester PCE-EVSE 310
£ 325.00
Price excl. VAT &. delivery
2 year Warranty
Topseller
The electric vehicle EVSE tester is  for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This VDE tester can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.  

PE pre-test
- Proximity Pilot PP / Control Pilot CP
- Simulation CP fault "E" / PE fault
- Mains socket for measuring purposes
- Safety measuring sockets
Optional adapter to type 1
Digital Thermometer PCE-EMD 10-ICA Incl. ISO Calibration Certificate
£ 889.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The digital thermometer can be connected to up to four external temperature and humidity modules. The temperature measuring range for the thermometer sensors is 32.0 ... 122.0 °F and the humidity measuring range is 0.0 ... 99.9% RH.

- Temperature measuring range: 32.0… 122.0 °F
- Humidity measuring range: 0.0 ... 99.9% RH
- Connection of up to four external sensors
- Analog 4 ... 20-mA input signal
- Wall mounting
- Incl. ISO calibration certificate
Digital Thermometer PCE-TC 34N
£ 974.00
Price excl. VAT &. delivery
2 year Warranty
The digital thermometer has a resolution of 320 x 240 pixels. With a measuring range of -20 ... 300 °C, the digital thermometer already covers a large temperature range. The emission value of the digital thermometer can be set to carry out measurements on different surfaces.

- Measuring range: -20 ... 300 °C / -4 ... 572 °F
- Infrared and real image resolution: 320 x 240 pixels
- Picture in picture function
- USB-C interface
- Refresh rate: 9Hz
- Storage for about 20,000 images
Thermometer PCE-EMD 10-ICA Incl. ISO Calibration Certificate
£ 889.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The thermometer can be connected to up to four external temperature and humidity modules. The temperature measuring range for the thermometer sensors is 32.0 ... 122.0 °F and the humidity measuring range is 0.0 ... 99.9% RH.

- Temperature measuring range: 32.0… 122.0 °F
- Humidity measuring range: 0.0 ... 99.9% RH
- Connection of up to four external sensors
- Analog 4 ... 20-mA input signal
- Wall mounting
- Incl. ISO calibration certificate
Dewpoint Meter PCE-VA 20
£ 254.00
Price excl. VAT &. delivery
2 year Warranty

PCE-VA 20 is a Dewpoint Meter for testing heating, ventilation and air conditioning or cooling (HVAC) systems. This combination anemometer-hygrometer-thermometer features a 10 cm / 3.9" Ø fan impeller, easy-to-read backlit LCD, and functions such as display hold, average value, maximum value, minimum value, battery-saving automatic power off, low-battery indicator, and metric or imperial unit selection.


- Measures air flow velocity, volume flow, relative humidity, air temperature, dew
  point temperature and wet-bulb temperature
- Air flow velocity range: 0.2 ... 30 m/s (39.4 ... 5905.5 fpm)
- Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of
  measured value + 0.3 m/s) when more than 20 m/s
- Resolution: 0.1

 

Air Quality Station PCE-WSAC 50-310
£ 378.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The Air Quality Station can be used in different fields of application. In use, the Air Quality Station carries out measurements from the smallest wind movements. The Air Quality Station can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 24 V DC
- Input signal: 4 ... 20 mA
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate
Infrared Thermometer PCE-TC 34N
£ 974.00
Price excl. VAT &. delivery
2 year Warranty
The infrared thermometer has a resolution of 320 x 240 pixels. With a measuring range of -20 ... 300 °C, the infrared thermometer already covers a large temperature range. The emission value of the infrared thermometer can be set to carry out measurements on different surfaces.

- Measuring range: -20 ... 300 °C / -4 ... 572 °F
- Infrared and real image resolution: 320 x 240 pixels
- Picture in picture function
- USB-C interface
- Refresh rate: 9Hz
- Storage for about 20,000 images
Digital Thermometer PCE-EMD 5-ICA incl. ISO Calibration Certificate
£ 889.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The digital thermometer can be connected to up to four external temperature and humidity modules. The temperature measuring range for the thermometer sensors is 0.0 … 50.0 °C and the humidity measuring range is 0.0… 99.9% RH.

- Temperature measuring range: 0.0 … 50.0 °C
- Humidity measuring range: 0.0 ... 99.9% RH
- Connection of up to four external sensors
- Analog 4 ... 20 mA input signal
- Wall mounting
- incl. ISO Calibration Certificate
Digital Thermometer PCE-HT 300
£ 408.00
Price excl. VAT &. delivery
2 year Warranty
The digital thermometer PCE-HT 300 is a laboratory data logger for temperature, dew point and humidity. The digital thermometer stores the measurement data on an internal 16 GB memory in CSV format. 

Measuring function
- Temperature: -10 ... 80°C / 14 ... 176°F
- Dew point: -10 ... 80°C / 14 ... 176°F
- Humidity: 0 ... 100% RH
- 16 GB of memory
- Storage as CSV
Thermometer PCE-HMM 50
£ 444.00
Price excl. VAT &. delivery
2 year Warranty

The hay thermometer PCE-HMM is a professional device to designed to determine moisture and temperature of pressed hay and straw. The hay thermometer features a sensor made of stainless steel, which can be purchased in four different lengths, while the wooden handle has an ergonomic design. The hay thermometer proves to be extremely robust, designed to withstand applications for many years.


- Measuring lance: 50 cm
- Measuring range moisture: 9 ... 50%
- Measuring range temperature: -10 ... 100°C / 14 ... 212°F
- Resolution of display: 0.1%
- Accuracy: 0.8%

Probe Thermometer PCE-HMM 50
£ 444.00
Price excl. VAT &. delivery
2 year Warranty

The hay probe thermometer PCE-HMM is a professional device to designed to determine moisture and temperature of pressed hay and straw. The hay probe thermometer features a sensor made of stainless steel, which can be purchased in four different lengths, while the wooden handle has an ergonomic design. The hay probe thermometer proves to be extremely robust, designed to withstand applications for many years.


- Measuring lance: 50 cm
- Measuring range moisture: 9 ... 50%
- Measuring range temperature: -10 ... 100°C / 14 ... 212°F
- Resolution of display: 0.1%
- Accuracy: 0.8%

Thermometer PCE-313 S
£ 346.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-313 S Thermometer has been designed for professional use in fields such as the air-conditioning sector. The PCE-313 S Thermometer determines both relative humidity and ambient temperature. The PCE-313 S Thermometer can be connected to type K thermo-elements to detect, for instance, the temperature of a wall by means of a surface probe.


- Relative humidity: 5 ... 95% r.H.
- Temperature: 0 ... 50°C / 32 ... 122°F
- Type K: -50 ... 1300°C / -58 ... 2372°F
- Calculated dew point: -25.3 ... 48.9°C / -13.54 ... 120°F

 

Thermometer PCE-TC 34N-ICA incl. ISO Calibration Certificate
£ 1,206.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The thermometer has a resolution of 320 x 240 pixels. With a measuring range of -20 ... 300 °C, the thermometer already covers a large temperature range. The emission value of the thermometer can be set to carry out measurements on different surfaces.

- Measuring range: -20 ... 300 °C / -4 ... 572 °F
- Infrared and real image resolution: 320 x 240 pixels
- Picture in picture function
- USB-C interface
- Refresh rate: 9Hz
- Storage for about 20,000 images
- incl. ISO Calibration Certificate
EV Test Instrument PCE-EVSE 310+
£ 325.00
Price excl. VAT &. delivery
2 year Warranty
Topseller
The EV test instrument is  for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This VDE tester can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.  

- PE pre-test
- Proximity-Pilot PP / Control-Pilot CP
- Simulation CP error "E" / PE error
- Mains socket for measuring purposes
- Safety measuring sockets
incl. type 2 plug and adapter to type 1