- 4 ... 20-mA measuring signal
- Intelligent storage system
- Connection to a PC via RS232
- Wall mounting for permanent installation
- SD card slot for up to 16GB
- Measurement of three pressure sensors simultaneously
- Sensors must be selected as an option!

The temperature data logger is a digital device with four input channels for type K and type J temperature sensors and two input channels for PT100 temperature sensors. The temperature data logger has a SD card slot (from 1 ... 16 GB) for storing the measured data. The data is stored in xls format on the SD card of the data logger so that no additional software is needed for further analysis. This temperature logging test instrument comes manufacturer calibrated. An ISO calibration certificate can be purchased as an optional accessory.

- 4 input channels for type-K, J temperature sensors
- 2 input channels for Pt100 temperature sensors
- 2 x type-K TF-500 temperature sensors are included in the package
- Sampling rate of 1 sec.
- SD card memory (1 ... 16 GB)

 

The pH / Conductivity / Salt / Oxygen Water Quality Data Logger PCE-PHD-1-KIT1 is a true all-rounder for checking water quality. The portable data logger is used to control the water parameters pH, redox, conductivity, salinity, oxygen and is also very suitable for temperature measurement. Storage, electrolyte, conductance and calibration solutions are included in this comprehensive kit. 

- Measuring range: pH value: 0.00 ... 14.00 pH
- Conductivity: 0 ... 200 µS/cm, 0.2 ... 2.0 mS/cm, 2 ... 20.0 mS/cm, 20 ... 200 mS/cm
- TDS: 0 ... 132 ppm, 132 ... 1320 ppm, 1320 ... 13200 ppm, 13200 ... 132000 ppm
- Oxygen: 0 ... 20.0 mg/l 
- Temperature: 0 ... 60.0 °C / 32 ... 140 ºF
- 2 point calibration, pH4 + pH7

- incl. Storage solution
- incl. pH4 + pH7
- incl. Electrolyte solution
- incl. Conductance solution
- incl. Carrying case

- Measuring range: 0 ... 4000 ppm
- Measuring range: 10 ... 90% RH
- Measuring range: 0 ... 50 °C / 32 ... 122 °F
- Memory on SD card
- 3 parameters of air quality
- CO2, air temperature and humidity
- incl. ISO Calibration Certificate (for CO2 only)

Data Logger with acoustic signal, internal memory and software.

- Measurement ranges: 0.01 µSv / h - 1000 µSv / h
- Radiation detector: Geiger-Muller counting tub
- Internal memory: 2 KB
- Radiation types: Alpha 4 MeV, Beta 0.2 MeV, Gamma 0.02 MeV.
- Online, to transfer data to a PC , with pulse interval of 10, 30 or 60 sg
- With additional alarm and acoustic pulse indicator

- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- incl. software for LEQ calculation
- incl. ISO calibration certificate

Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.

The PCE-313 A Data Logger measures relative humidity and temperature and can be used in the air-conditioning sector. The PCE-313 A Data Logger can be connected to type K thermo-elements to detect, for instance, the temperature of a wall by means of a surface probe. The internal memory of this test equipment allows the Data Logger to record humidity and temperature data at an adjustable measurement interval. Thanks to its SD memory card (1 to 16 GB) the humidity test instrument can be used for long term data acquisition. The logging meter comes manufacturer calibrated (ISO calibration certificate as an option).

- Relative humidity: 5 ... 95% r.H.
- Temperature: 0 ... 50°C / 32 ... 122°F
- Type K: -50 ... 1300°C / -58 ... 2372°F
- Calculated dew point: -25.3 ... 48.9°C / -13.5 ... 120°F
- Wet bulb temperature: -21 ... 50°C / -5.8 ... 122°F
- Memory: SD card (1 ... 16 GB)

 

The data logger for temperature and humidity detects air temperature and humidity and stores readings in its internal memory. The data logger for temperature and humidity has a compact format and a wide memory capacity (up to 32,000 values / 16,000 values for each parameter) and it is mainly used as a data logger in fields such as supermarket refrigeration units, refrigerated transport, warehouses, and other temperature controlled environments.

- Measurement range: 0 ... 100% RH / -35 ... 70°C / -31 ... 158°F
- Accuracy: ± 3% RH (20 ... 80%) and  ± 5% / ± 1°C (1.8°F)
- Resolution: 0.5% RH / 0.1°C (0.18°F)
- Memory: Max. 32,000 measurement data (16,000 for each parameter (humidity / temperature))

The PCE-HT110 Temperature Data Logger or Humidity Detector precisely measures air temperature and relative humidity. This accurate and reliable device shows the current measurements on the large LCD display and saves the measurement data directly to an SD card (included). The PCE-HT110 is equipped with two channels, accommodates an SD card memory of up to 16 GB, offers an adjustable measurement rate / sampling interval, and includes a wall mount, making the device ideal for logging data over an extended period of time.

- Measurement ranges: 0 … 50°C / 32 ... 122°F, 10 ... 90% RH
- Resolution: 0.1°C / 0.18°F, 0.1% RH
- Data format: .XLS (compatible with Microsoft Excel)
- Incl. ISO Calibration Certificate

The data logger for temperature and humidity is a combination thermometer hygrometer used to measure the relative humidity (% RH) and temperature (°C / °F) of the air. Ideal for use in evaluating heating, ventilation and air conditioning (HVAC) system performance, this digital data logger for temperature and humidity also has a port for connecting a type-K thermocouple.

- Relative humidity: 5 ... 95% r.H.
- Temperature: 0 ... 50°C / 32 ... 122°F
- Type K: -50 ... 1300°C / -58 ... 2372°F
- Calculated dew point: -25.3 ... 48.9°C / -13.5 ... 120°F
- Wet bulb temperature: -21 ... 50°C / -5.8 ... 122°F
- Memory: SD card (1 ... 16 GB)

 

This Data Logger meter is very economical. With this Data Logger meter you can measure wind speed and air temperature.

- Speed measurement up to 45 m/s or 100 mph
- Wind speed: 0.01 m/s, accuracy ±3% ±0.1
- Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
- Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface
- Incl. ISO calibration certificate

The PCE-HT110 Temperature Data Logger or Humidity Detector precisely measures air temperature and relative humidity. This accurate and reliable device shows the current measurements on the large LCD display and saves the measurement data directly to an SD card (included). The PCE-HT110 is equipped with two channels, accommodates an SD card memory of up to 16 GB, offers an adjustable measurement rate / sampling interval, and includes a wall mount, making the device ideal for logging data over an extended period of time.

- Measurement ranges: 0 … 50°C / 32 ... 122°F, 10 ... 90% RH
- Resolution: 0.1°C / 0.18°F, 0.1% RH
- Data format: .XLS (compatible with Microsoft Excel)

The PCE-HT 71N hygrometer data logger detects air temperature and humidity and stores readings to its internal memory. This hygrometer is compact and has enough memory to store up to 32,000 readings, 16,000 for each parameter, and is used above all as a Data- Logger, in supermarket refrigeration units, refrigerated transport, warehouses and other temperature controlled environments.

- Measurement range: 0 ... 100% RH / -35 ... 80°C / -31 ... 176°F
- Accuracy: ± 3% RH (20 ... 80%) and  ± 5% / ± 1°C (1.8°F)
- Resolution: 0.5% RH / 0.1°C (0.18°F)
- Memory: Max. 32,000 measurement data (16,000 for each parameter (humidity / temperature))

The temperature data logger has a CO² measuring range of 0 ... 9999 ppm. In addition to the carbon dioxide measurement, the temperature data logger also has a carbon monoxide (CO) sensor with a measuring range of 0 ... 1000 ppm and a temperature and humidity sensor.

- Carbon monoxide (CO): 0 … 1000 ppm
- Carbon dioxide (CO²): 0 … 9999 ppm
- Temperature: 0 … 50 °C / 32 … 122 °F
- Humidity: 0 … 100% RH
- Data memory for 5000 measuring points
- Data export CSV
- Power supply: rechargeable battery

- Measuring range: 0/4 ... 20-mA
- Resolution: 0.01-mA
- Accuracy: ± (0.5% + 0.02-mA)
- Memory on SD card
- 3 measuring channels