Products for 'Current Transformer PCE LCTB 100/130V 45 '

Multifunction Relative Humidity Meter PCE-AM 45

£ 188.00

Price excl. VAT &. delivery
2 year Warranty

The multifunction relative humidity meter determines the wind speed via an impeller with a diameter of 65 mm. The relative humidity meter can reliably determine the speed in a measuring range of 0.3 ... 45.0 m/s.

- Measuring range: 0.3 ... 45.0 m/s / 0.9 ... 147 ft/s
- Velocity and volume flow measurement
- Telescopic probe with a length of 270 ... 540 mm / 10.63 … 21.26“
- Impeller opening of 65 mm / 2.5"
- Interface: Micro USB
- Data memory: 960 measured values

Current Clamp PCE-PCM 3

£ 205.00

Price excl. VAT &. delivery
2 year Warranty

With the current clamp AC currents of up to 1000 A AC can be measured easily. At the same time, voltages of up to 1000V AC / DC can be measured with the current clamp.

Measuring function
- Current measurement AC
- Inrush current AC
- Voltage measurement DC
- Voltage measurement AC
- Frequency measurement
- Frequency measurement current measurement function
- Frequency measurement voltage measurement function
- Duty cycle
- Resistance measurement
- Continuity test
- Capacity measurement
- Diode measurement
- Single-phase power measurement
- Power factor capacitive / inductive
- Harmonics measurement

Current Signal Transducer PCE-SCI-E

£ 177.00

Price excl. VAT &. delivery
2 year Warranty

The current signal transducer has an adjustable measuring range of 0… 600 V AC/DC and can therefore measure a wide variety of voltages. For example, it is possible to connect the transmitter to the supply line in order to monitor the applied voltage.

- Measuring range 0 ... 600 V AC/DC
- Active and passive output signal
- Display and keypad for configuration
- Frequency measurement
- DIN rail mounting
- Display

Multifunction Air Humidity Meter PCE-AM 45

£ 188.00

Price excl. VAT &. delivery
2 year Warranty

The multifunction air humidity meter determines the wind speed via an impeller with a diameter of 65 mm. The air humidity meter can reliably determine the speed in a measuring range of 0.3 ... 45.0 m/s.

- Measuring range: 0.3 ... 45.0 m/s / 0.9 ... 147 ft/s
- Velocity and volume flow measurement
- Telescopic probe with a length of 270 ... 540 mm / 10.63 … 21.26“
- Impeller opening of 65 mm / 2.5"
- Interface: Micro USB
- Data memory: 960 measured values

Current Clamp PCE-DC 41-ICA incl. ISO Calibration Certificate

£ 308.00

Price excl. VAT &. delivery
2 year Warranty

The current clamp PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the current clamp, or you can use the integrated clamp mechanism. By using the clamp of the digital current clamp, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it.

- Voltage: 600 V AC/DC
- Current: 600 A AC/DC
- Electrical Resistance: 1000 Ω
- Clamp mechanism
- Incl. ISO Calibration Certificate

Current Signal Converter PCE-SCI-E

£ 177.00

Price excl. VAT &. delivery
2 year Warranty

The current signal converter has an adjustable measuring range of 0… 600 V AC/DC and can therefore measure a wide variety of voltages. For example, it is possible to connect the transmitter to the supply line in order to monitor the applied voltage.

- Measuring range 0 ... 600 V AC/DC
- Active and passive output signal
- Display and keypad for configuration
- Frequency measurement
- DIN rail mounting
- Display

Current Measuring Transducer PCE-SCI-L

£ 178.00

Price excl. VAT &. delivery
2 year Warranty

The current measuring transducer and millivolt signals offers a wide range of configuration options for converting signals. The output signal can be selected between 4 ... 20 mA and 0 ... 10 VDC can be selected. The current measuring transducer can be configured to measure load cells in the range 0 ... 5 mV to 0 ... 80 mV, also with bipolar ranges from ±5 mV to ±80 mV.

- Inputs from 0 ... 80 mV to ±80 mV

- Analog outputs 4 ... 20 mA and 0 ... 10 V

- Simple programming via keypad

- Top-hat rail mounting

- Power supply 18 ... 265 V AC/DC

Electrical Tester PCE-PA 8500

£ 2,916.00

Price excl. VAT &. delivery
2 year Warranty

The electrical tester redefines standards in electrical measurement technology, offering a comprehensive range of features for precise and detailed measurements. The electrical tester allows accurate measurements of electrical voltage, current, frequency, harmonics, and starting currents. In addition, precise power and energy measurements can be performed, enabling accurate monitoring and optimization of energy consumption.

- Voltages: 1 ... 1000 V

- Current: 15 ... 3000 A AC

- Graphical representation of waveform and vector graphics

- Data logger with 8 GB storage

- LAN and USB data interface

- Includes flexible current clamps

- Compliance with standards: IEC61000-4-30, 61000-4-15,

61000-4-7, EN50160

Current Clamp PCE-LCT 1-ICA incl. ISO Calibration Certificate

£ 273.00

Price excl. VAT &. delivery
2 year Warranty

With the Current Clamp it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The Current Clamp captures these currents and displays them on the display.

- Measurable electrical parameters: AC V, AC A, resistance
- Clamp diameter: 30 mm
- Operating temperature: -10 ... 50°C / 50 ... 122°F
- Current consumption: 10-mA
- Incl. ISO calibration certificate

Surface Testing - Gloss Meter PCE-IGM 100-ICA incl. ISO calibration certificate

£ 2,266.00

Price excl. VAT &. delivery
2 year Warranty

A gloss meter is a tester for determining surface gloss. Thereby, with the glossmeter, spectral reflections of a light beam that hits the surface, are measured. The touch screen allows for easy navigation.

- Measuring geometries: 20° / 60° / 85°
- Measuring range: 20° : 0 ... 1000 GU / 60° : 0 ... 1000 GU / 85° : 0 ... 160 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate

Current Clamp PCE-CM 40

£ 169.00

Price excl. VAT &. delivery
2 year Warranty

The flexible current clamp PCE-CM 40 is suitable for current measurements up to 3000 A AC. In addition to TRMS current measurement, the flexible current clamp PCE-CM 40 can be used to measure inrush currents. The measurement of the current takes place via a flexible Rogowski coil.

- Measuring range up to 3000 A AC
- LC display
- Inrush function
- Frequency measurement
- Data memory

Gloss Meter PCE-IGM 100-ICA incl. ISO calibration certificate

£ 2,266.00

Price excl. VAT &. delivery
2 year Warranty

- Measuring geometries: 20° / 60° / 85°
- Measuring range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate

Current Clamp PCE-DC 25

£ 165.00

Price excl. VAT &. delivery
2 year Warranty

The current clamp has a measuring range of 0 … 1000 A AC/DC. The current is measured inductively using the clamp on the measuring device. Live supply lines with a diameter of up to 32 mm (1.2") can be connected to the current clamp.

- Measuring range: 0 ... 1000 A AC/DC
- Bluetooth interface
- Inrush current measurement
- LC color display
- Not Connected Voltage function

Environmental Meter PCE-PVA 100

£ 1,136.00

Price excl. VAT &. delivery
2 year Warranty

The environmental meter is a useful tool to examine solar cells for their characteristics. With a DC voltage range of 0… 60 V and a DC current range of 0… 12 A, the environmental meter covers a large number of solar modules.

- Measuring range: 0 ... 12 A DC
- Three different test functions
- PC interface for data transfer
- Switchable graphic view
- Application, e.g. photovoltaic systems

Photovoltaic Meter PCE-PVA 100

£ 1,136.00

Price excl. VAT &. delivery
2 year Warranty

The photovoltaic meter is a useful tool to examine solar cells for their characteristics. With a DC voltage range of 0… 60 V and a DC current range of 0… 12 A, the photovoltaic meter covers a large number of solar modules.

- Measuring range: 0 ... 12 A DC
- Three different test functions
- PC interface for data transfer
- Switchable graphic view
- Application, e.g. photovoltaic systems

Current Clamp PCE-LCT 1

£ 159.00

Price excl. VAT &. delivery
2 year Warranty

With the Current Clamp it is possible to measure leakage currents up to a range of 100 A. The Current Clamp can measure leakage currents which appear when current flows through electrical conductors which are not designed for conduction current.

- Measures current up to 100 A
- Measures voltage up to 600 V
- Measures resistance up to 400 O
- Test cables are included

Three-Phase Power Analyzer PCE-PA 8500-ICA incl. ISO-Calibration Certificate

£ 3,302.00

Price excl. VAT &. delivery
2 year Warranty

The three-phase power analyzer redefines standards in electrical measurement technology, offering a comprehensive range of features for precise and detailed measurements. The three-phase power analyzer allows accurate measurements of electrical voltage, current, frequency, harmonics, and starting currents. In addition, precise power and energy measurements can be performed, enabling accurate monitoring and optimization of energy consumption.

- Voltages: 1 ... 1000 V

- Current: 15 ... 3000 A AC

- Graphical representation of waveform and vector graphics

- Data logger with 8 GB storage

- LAN and USB data interface

- Includes flexible current clamps

- Compliance with standards: IEC61000-4-30, 61000-4-15,

61000-4-7, EN50160

- incl. ISO-Calibration Certificate

Current Clamp PCE-PCM 1

£ 173.00

Price excl. VAT &. delivery
2 year Warranty

PCE-PCM 1 is a multipurpose current clamp or power analyzer used to measure alternating current (AC), voltage (TRMS) and frequency to determine active (kW), apparent (kVA) and reactive (kVAR) power as well as active energy (kWh) consumption. Both the phase angle and the power factor (cos φ) are shown on the handheld power meter's large and easy-to-read backlit display.

- Voltage (50 ... 200 Hz): 100 / 400 / 750V, ± (1.2% + 5 digits)
- Internal memory: Stores up to 99 measurement values
- Includes USB cable and PC software
- Three-phase power measurement
- True RMS