Products for 'Current Calibrator PCE RTD 20 '

Humidity Detector PCE-AQD 20-ICA Incl. ISO Calibration Certificate

£ 761.00

Price excl. VAT &. delivery
2 year Warranty

The humidity detector is an ideal measuring device for monitoring the air quality at workplaces. The humidity detector is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.

Measuring function
- PM2.5
- Humidity
- Temperature
- CO2
- Air pressure
- Memory: SD card max. 32 GB
- Ideal for workplace monitoring
- Alarm function
- Incl. ISO calibration certificate

Hygrometer PCE-AQD 20-ICA Incl. ISO Calibration Certificate

£ 761.00

Price excl. VAT &. delivery
2 year Warranty

The hygrometer is an ideal measuring device for monitoring the air quality at workplaces. The hygrometer is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.

Measuring function
- PM2.5
- Humidity
- Temperature
- CO2
- Air pressure
- Memory: SD card max. 32 GB
- Ideal for workplace monitoring
- Alarm function
- Incl. ISO calibration certificate

Current Clamp PCE-LCT 1-ICA incl. ISO Calibration Certificate

£ 273.00

Price excl. VAT &. delivery
2 year Warranty

With the Current Clamp it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The Current Clamp captures these currents and displays them on the display.

- Measurable electrical parameters: AC V, AC A, resistance
- Clamp diameter: 30 mm
- Operating temperature: -10 ... 50°C / 50 ... 122°F
- Current consumption: 10-mA
- Incl. ISO calibration certificate

Current Clamp PCE-CM 40-ICA incl. ISO Calibration Certificate

£ 240.00

Price excl. VAT &. delivery
2 year Warranty

The flexible current clamp PCE-CM 40-ICA is suitable for current measurements up to 3000 A AC. In addition to TRMS current measurement, the flexible current clamp PCE-CM 40-ICA can be used to measure inrush currents. The measurement of the current takes place via a flexible Rogowski coil.

- Measuring range up to 3000 A AC
- LC display
- Inrush function
- Frequency measurement
- Data memory
- Incl. ISO Calibration Certificate

Condition Monitoring Inspection Camera PCE-PIC 20

£ 1,765.00

Price excl. VAT &. delivery
2 year Warranty

The condition monitoring inspection camera PCE-PIC 20 is an ideal tool for any service technician who needs to visually inspect pipes and ducts. The condition monitoring inspection camera PCE-PIC 20 has a 23 mm / 0.9 in camera head, which is attached to a glass fiber push cable.

- Cable diameter / head diameter: 23 mm / 0.9 in
- 20 m / 66 ft push cable
- Electronic meter counting
- Battery and mains operation
- Waterproof up to 20 m / 66 ft

NDT Tester Inspection Camera PCE-PIC 20

£ 1,765.00

Price excl. VAT &. delivery
2 year Warranty

The NDT tester inspection camera PCE-PIC 20 is an ideal tool for any service technician who needs to visually inspect pipes and ducts. The NDT tester inspection camera PCE-PIC 20 has a 23 mm / 0.9 in camera head, which is attached to a glass fiber push cable.

- Cable diameter / head diameter: 23 mm / 0.9 in
- 20 m / 66 ft push cable
- Electronic meter counting
- Battery and mains operation
- Waterproof up to 20 m / 66 ft

Inspection Camera / Chimney Camera PCE-PIC 20

£ 1,765.00

Price excl. VAT &. delivery
2 year Warranty

The inspection camera PCE-PIC 20 is an ideal tool for any service technician who needs to visually inspect pipes and ducts. The inspection camera PCE-PIC 20 has a 23 mm / 0.9 in camera head, which is attached to a glass fiber push cable.

- Cable diameter / head diameter: 23 mm / 0.9 in
- 20 m / 66 ft push cable
- Electronic meter counting
- Battery and mains operation
- Waterproof up to 20 m / 66 ft

Multifunction Conductivity Meter PCE-BPH 20-ICA incl ISO Calibration Certificate

£ 845.00

Price excl. VAT &. delivery
2 year Warranty

The table-top multifunction conductivity meter can be used to quickly and precisely analyze liquid samples. Thus, for example, water, alkalis, milk, wine and many other liquids can be checked for their quality with the conductivity meter.

Measuring range:
- pH, mV, TDS
- Temperature, conductivity
- Salinity, resistance
- Large 7" touchscreen
- Bluetooth and USB interfaces
- 3 point calibration
- incl. ISO Calibration Certificate (for PH value only)

Table pH Meter PCE-BPH 20-ICA incl. ISO Calibration Certificate

£ 845.00

Price excl. VAT &. delivery
2 year Warranty

The table-top pH meter can be used to quickly and precisely analyze liquid samples. Thus, for example, water, alkalis, milk, wine and many other liquids can be checked for their quality with the pH meter.

Measuring range:
- pH, mV, TDS
- Temperature, conductivity
- Salinity, resistance
- Large 7" touchscreen
- Bluetooth and USB interfaces
- 3 point calibration
- incl. ISO Calibration Certificate (for PH value only)

Water Analysis Meter PCE-BPH 20-ICA incl. ISO Calibration Certificate

£ 845.00

Price excl. VAT &. delivery
2 year Warranty

The table-top water analysis meter can be used to quickly and precisely analyze liquid samples. Thus, for example, water, alkalis, milk, wine and many other liquids can be checked for their quality with the water analysis meter.

Measuring range:
- pH, mV, TDS
- Temperature, conductivity
- Salinity, resistance
- Large 7" touchscreen
- Bluetooth and USB interfaces
- 3 point calibration
- incl. ISO Calibration Certificate (for PH value only)

Carbon Dioxide Meter PCE-AQD 20-ICA Incl. ISO Calibration Certificate

£ 761.00

Price excl. VAT &. delivery
2 year Warranty

The carbon dioxide meter PCE-AQD 20 is an ideal measuring device for monitoring the air quality at workplaces. The health and environmental carbon dioxide meter is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.

Measuring function
- PM2.5
- Humidity
- Temperature
- CO2
- Air pressure
- Memory: SD card max. 32 GB
- Ideal for workplace monitoring
- Alarm function
- Incl. ISO calibration certificate

Gas Leak Detector PCE-AQD 20-ICA Incl. ISO Calibration Certificate

£ 761.00

Price excl. VAT &. delivery
2 year Warranty

The gas leak detector PCE-AQD 20 is an ideal measuring device for monitoring the air quality at workplaces. The health and gas leak detector is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.

Measuring function
- PM2.5
- Humidity
- Temperature
- CO2
- Air pressure
- Memory: SD card max. 32 GB
- Ideal for workplace monitoring
- Alarm function
- Incl. ISO calibration certificate

CO2 / Room Climate Data Logger PCE-AQD 20-ICA Incl. ISO Calibration Certificate

£ 761.00

Price excl. VAT &. delivery
2 year Warranty

The CO2 / Room Climate Data Logger PCE-AQD 20 is an ideal measuring device for monitoring the air quality at workplaces. The health and CO2 data logger is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.

Measuring function
- PM2.5
- Humidity
- Temperature
- CO2
- Air pressure
- Memory: SD card max. 32 GB
- Ideal for workplace monitoring
- Alarm function
- Incl. ISO calibration certificate

Force Gage PCE-DFG N 20-ICA incl. ISO Calibration Certificate

£ 845.00

Price excl. VAT &. delivery
2 year Warranty

Force gage PCE-DFG N 20-ICA for tensile force measurement and force measurement up to 20 N. The digital force gage is for precise measurements with a resolution of 0.01 N.

- Measuring range: 0 ... 20 N, 0 ... 4.5 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- Pull and pressure force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
- Incl. ISO calibration certificate

Air Quality Station PCE-AQD 20-ICA Incl. ISO Calibration Certificate

£ 761.00

Price excl. VAT &. delivery
2 year Warranty

The air quality station is an ideal measuring device for monitoring the air quality at workplaces. The health and environmental air quality station is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.

Measuring function
- PM2.5
- Humidity
- Temperature
- CO2
- Air pressure
- Memory: SD card max. 32 GB
- Ideal for workplace monitoring
- Alarm function
- Incl. ISO calibration certificate

Air Quality Meter PCE-AQD 20-ICA Incl. ISO Calibration Certificate

£ 761.00

Price excl. VAT &. delivery
2 year Warranty

The air quality meter is an ideal measuring device for monitoring the air quality at workplaces. The health and environmental air quality meter is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.

Measuring function
- PM2.5
- Humidity
- Temperature
- CO2
- Air pressure
- Memory: SD card max. 32 GB
- Ideal for workplace monitoring
- Alarm function
- Incl. ISO calibration certificate

Temperature Data Logger PCE-AQD 20-ICA Incl. ISO Calibration Certificate

£ 761.00

Price excl. VAT &. delivery
2 year Warranty

The temperature data logger PCE-AQD 20 is an ideal measuring device for monitoring the air quality at workplaces. The health and environmental temperature data logger is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.

Measuring function
- PM2.5
- Humidity
- Temperature
- CO2
- Air pressure
- Memory: SD card max. 32 GB
- Ideal for workplace monitoring
- Alarm function
- Incl. ISO calibration certificate

Dust Measuring Device PCE-AQD 20-ICA Incl. ISO Calibration Certificate

£ 761.00

Price excl. VAT &. delivery
2 year Warranty

The dust measuring device is an ideal measuring device for monitoring the air quality at workplaces. The dust measuring device is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.

Measuring function
- PM2.5
- Humidity
- Temperature
- CO2
- Air pressure
- Memory: SD card max. 32 GB
- Ideal for workplace monitoring
- Alarm function
- Incl. ISO calibration certificate