Products for 'Condition Monitoring Wireless Vibration Monitor PCE VMS 504 '

Condition Monitoring Climate Meter PCE-T 1200

£ 978.00

Price excl. VAT &. delivery
2 year Warranty

PCE-T 1200 is a 12-channel climate meter that accommodates SD cards up to 16 GB in size. The optional software allows the temperature meter to connect to a PC via USB for direct data transfer and analysis via Microsoft Excel.

- 12-channel data logger for temperature (°C / °F)
- Works with type K, J, T, E, R and S thermocouple sensors
- Adjustable datalogging interval from 1 ... 3600 seconds per channel
- Includes 2 Type K sensors 1-meter in length

Accelerometer PCE-VM 400B

£ 4,445.00

Price excl. VAT &. delivery
2 year Warranty

Accelerometer / Vibration sensor is a technologically advanced instrument for the precise measurement and evaluation of vibrations in industrial applications. It enables the simultaneous measurement of vibrations on shafts and bearings across four independent channels. The accelerometer / vibration sensor has various measurement functions, including acceleration, velocity, displacement, and rotational speed, to cover a wide range of applications.

- 4 channels for measurement

- Measurement on shafts, bearings, motors, generators

- Piezoelectric acceleration sensors

- Wide frequency range: 1 ... 25000 Hz

- Acceleration: 0.001 ... 200 m/s²

- Velocity: 0.001 ... 200 mm/s

- Balancing up to 8 correction planes

- USB interface

- 4 GB data storage

- Evaluation according to ISO 10816

Dust Monitor PCE-PQC 22EU Incl. Calibration Certificate

£ 4,521.00

Price excl. VAT &. delivery
2 year Warranty

The dust monitor detects quickly where e.g. particles, air particles contaminate the air and can cause diseases such as asthma, bronchitis, skin and lung diseases.

- Measuring range: 0.3 ... 25 μm
- Measuring channel sizes: 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 μm
- Counting efficiency: 50% at 0.3 μm 100% at > 0.45 μm according to JIS
- Ethernet, USB
- CO2 sensor
- Includes temperature and humidity sensor
- Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

Vibration Data Logger PCE-VM 5000

£ 1,971.00

Price excl. VAT &. delivery
2 year Warranty

The 4-channel PCE-VM 5000 Data Logging Instrument performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the vibration measuring device is able to record vibrations at different points of the component to be tested. These Data Logging Instrument are manufacturer calibrated. An ISO calibration certificate is an option.

- Frequency range: 10 Hz ... 1 kHz
- Measurement of acceleration, velocity and displacement
- Connection of up to 4 sensors simultaneously, 2 included
- Data storage on SD card

Condition Monitoring Device PCE-TG 300-NO2

£ 943.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-TG 300-NO2 is a condition monitoring device for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the condition monitoring device. Wall thicknesses under a coating can also be measured with the condition monitoring device.

- Measuring range: 3.0 … 300.0 mm / 0.118 ... 11.81" (steel)
- Diameter: 14 mm / 0.55"
- Minimum diameter of pipes: 30 mm / 1.18"
- Frequency: 2.5 MHz
- Bluetooth

Condition Monitoring Device PCE-TG 300-NO7

£ 939.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-TG 300-NO7 is a condition monitoring device for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the condition monitoring device. Wall thicknesses under a coating can also be measured with the condition monitoring device.

- Measuring range: 0.65 ... 200 mm / 0.025 ... 7.87" (steel)
- Diameter: 6 mm / 0.23"
- Minimum diameter of pipes: 15 x 2 mm / 0.59 x 0.07"
- Frequency: 7 MHz
- Bluetooth

Condition Monitoring Climate Meter PCE-T 1200-ICA incl. ISO Calibration Certificate

£ 1,629.00

Price excl. VAT &. delivery
2 year Warranty

Dust Monitor PCE-PQC 15EU Incl. Calibration Certificate

£ 4,125.00

Price excl. VAT &. delivery
2 year Warranty

The dust monitor detects quickly where eg particles, air particles contaminate the air and can cause diseases such as asthma, bronchitis, skin and lung diseases.

- Measuring range: 0.5 ... 75 μm
- Measuring channel sizes: 0.5, 1.0, 2.5, 5.0, 10.0, 30.0 μm
- Counting efficiency: 50% at 0.5 μm 100% at > 0.75 μm according to JIS
- ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration
- USB
- Incl. temperature and humidity sensor
- Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

Condition Monitoring Device PCE-TG 300-NO5

£ 908.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-TG 300-NO5 is a condition monitoring device for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the condition monitoring device. Wall thicknesses under a coating can also be measured with the condition monitoring device.

- Measuring range: 1 ... 600 mm / 0.039 ... 23.62" (steel)
- Diameter: 10mm / 0.39"
- Minimum diameter of pipes: 20 x 3 mm / 0.787 ... 0.118"
- Frequency: 5 MHz
- Bluetooth

Condition Monitoring Vibration Sensor Switch PCE-VS11

£ 353.00

Price excl. VAT &. delivery
2 year Warranty

PCE-VS11 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features a red and green visual warning or alarm with programmable high pass and low pass filters.

- Frequency range (max.): 0.1 Hz ...10 kHz
- Measuring range: Acceleration = 0.1 ... 1000 m/s², Speed = Frequency-dependent
- Connections: Screw terminals for power supply (5 ... 30V DC) and Micro USB (internal)
- Mounting: M8 stud bolt

Condition Monitoring Vibration Meter PCE-WVS 50

£ 343.00

Price excl. VAT &. delivery
2 year Warranty

Portable vibration meter used to monitor, diagnose, control and solve problems related to the vibration velocity of various industrial equipment.

- Vibration velocity: 0,01 ... 200 mm/s

- Vibration acceleration: 0,1 ... 200 m/s²

- Vibration displacement: 2 ... 2000 μm

- Frequency range: 10 ... 1000 Hz

- Accuracy: ± 5

- Display: OLED, 0,91"

Vibration Data Logger PCE-VM 22-ICA incl. ISO Calibration Certificate

£ 2,534.00

Price excl. VAT &. delivery
2 year Warranty

The vibration data logger has a measuring range of 0 ... 200 m/s² for acceleration. In addition to acceleration, the vibration data logger can also perform speed, displacement, frequency and an ISO 18016-3 measurement.

- Acceleration
- Velocity
- Displacement
- Frequency
- Tachometer
- Infrared temperature measurement
- 4 GB data memory
- FFT analysis and wave view of the vibration
- incl. ISO Calibration Certificate

Condition Monitoring Vibration Meter PCE-VT 1100S-ICA incl. Certificate

£ 415.00

Price excl. VAT &. delivery
2 year Warranty

The condition monitoring vibration meter is suitable for relative measurements on various machines. With the 45 mm long needle probe, you can access hard-to-reach places in machines and motors. For this reason, this condition monitoring vibration meter is used for rapid measurement of imbalance and for checking bearing and gear conditions.

- Frequency range: 10 Hz ... 1 kHz

- Measures speed, distance, acceleration in metric units

- Holds the reading after each measurement

- Portable and battery operated

- Needle probe: 45mm / 1.77"
- incl. ISO Calibration Certificate

Condition Monitoring Vibration Meter PCE-VT 1100-ICA incl. Certificate

£ 415.00

Price excl. VAT &. delivery
2 year Warranty

The condition monitoring vibration meter is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this vibration meter, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement.

- Frequency range: 10 Hz ... 1 kHz

- Measures speed, distance, acceleration in metric units

- Holds the reading after each measurement

- Easy to handle and battery operated

- Standard probe: 10mm
- incl. ISO Calibration Certificate

Dust Monitor PCE-PQC 10EU Incl. Calibration Certificate

£ 3,716.00

Price excl. VAT &. delivery
2 year Warranty

The dust monitor detects quickly where eg particles, air particles contaminate the air and can cause diseases such as asthma, bronchitis, skin and lung diseases.

- Measuring range: 0.3 ... 25 μm
- Measuring channel sizes: 0.3, 0.5, 1.0, 2.5, 5.0, 10.0 μm
- Counting efficiency: 50% at 0.3 μm 100% at > 0.45 μm according to JIS
- ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration
- Ethernet, USB
- Incl. temperature and humidity sensor
- Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

Dust Monitor PCE-PQC 34EU Incl. Calibration Certificate

£ 3,912.00

Price excl. VAT &. delivery
2 year Warranty

The environmental dust monitor is characterized by its small size and easy wall mounting. The fixed installation of the dust monitor ensures high-precision air quality studies.

- Measuring range: 0.3 ... 25 μm
- Measurement channel sizes: 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 μm
- Counting efficiency: 50% at 0.3 μm, 100% at > 0.45 μm according to JIS
- CO2 Sensor: 0 ... 5000 ppm
- Ethernet, USB
- Includes temperature and humidity sensor
- Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

Dust Monitor PCE-PQC 20EU Incl. Calibration Certificate

£ 3,746.00

Price excl. VAT &. delivery
2 year Warranty

The dust monitor is very well suited for monitoring and checking of clean rooms, filter systems in operating rooms and filling systems in the pharmaceutical industry. The stored data records from the dust monitor can be read out and processed via the supplied software via Ethernet, USB or Wifi.

- Measuring range: 0.3 ... 25 μm
- Measurement channel sizes: 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 μm
- Counting efficiency: 50% at 0.3 μm, 100% at > 0.45 μm according to JIS
- Ethernet, USB
- Incl. temperature and humidity sensor
- Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

Dust Monitor PCE-PQC 30EU Incl. Calibration Certificate

£ 3,049.00

Price excl. VAT &. delivery
2 year Warranty

The dust monitor is the most advanced particle counter on the market. Integration into a building automation and clean room management system is easily possible via Ethernet or (optionally) Wireless 802.11 b / g, RS485 or RS232.

- Measuring range: 0.3 ... 25 μm
- Measurement channel sizes: 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 μm
- Counting efficiency: 50% at 0.3 μm, 100% at > 0.45 μm according to JIS
- Interface: Ethernet, USB
- Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921