- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- Incl. software for LEQ calculation


Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.

PCE-VS12 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features an external USB port, 8-pin female connector 711 and programmable high pass and low pass filters.

- Frequency range (max.): 0.1 Hz ...10 kHz
- Measuring range: Acceleration = 0.1 ... 1000 m/s², Speed = Frequency-dependent
- Connections: Screw terminals for power supply (5 ... 30V DC) and Micro USB (internal)
- Mounting: M8 stud bolt

The hay contact thermometer PCE-HMM is a professional device to designed to determine moisture and temperature of pressed hay and straw. The hay contact thermometer features a sensor made of stainless steel, which can be purchased in four different lengths, while the wooden handle has an ergonomic design. The hay contact thermometer proves to be extremely robust, designed to withstand applications for many years.

- Measuring lance: 50 cm
- Measuring range moisture: 9 ... 50%
- Measuring range temperature: -10 ... 100°C / 14 ... 212°F
- Resolution of display: 0.1%
- Accuracy: 0.8%

- Measuring range: 1.20 ... 300.0 mm  / 0.04 ... 11.81"
- Accuracy: ±0.5% of measured value + 0.05 mm
- Memory capacity: 1500 measured values
- Calibration reference on housing
- Probe temperature range: -10 ... 60 °C / 14 ... 140 °F
- incl. ISO Calibration Certificate

- Measuring range: 0.3 ... 25 μm
- Measuring channel sizes: 0.3, 0.5, 1.0, 2.5, 5.0, 10.0 μm
- Counting efficiency: 50% at 0.3 μm 100% at > 0.45 μm according to JIS
- ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration
- Ethernet, USB
- Incl. temperature and humidity sensor
- Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

- Measuring range: 0.3 ... 25 μm
- Measurement channel sizes: 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 μm
- Counting efficiency: 50% at 0.3 μm, 100% at > 0.45 μm according to JIS
- CO2 Sensor: 0 ... 5000 ppm
- Ethernet, USB
- Includes temperature and humidity sensor
- Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

- Measuring range: 0.3 ... 25 μm
- Measurement channel sizes: 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 μm
- Counting efficiency: 50% at 0.3 μm, 100% at > 0.45 μm according to JIS
- Ethernet, USB
- Incl. temperature and humidity sensor
- Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

The condition monitoring / belt tension meter is an optical measuring instrument for determining the belt tension force. This force measuring device consists of a display unit and a sensor on a gooseneck cable. The condition monitoring meter measures the tension of the belt in a stationary state.

- Measures the oscillation frequency of the belt
- Measuring range: 10 ... 900 Hz
- Accuracy: ± (1% of rdg. + 4 digits)
- Resolution: <100 Hz: 0.1 Hz
                       >100 Hz: 1 Hz
- Memory for 750 measured values
- Length of gooseneck sensor 25 cm / 9,8 in
- incl. ISO Calibration Certificate

- Measuring range: 0.5 ... 25 μm
- Measuring channel sizes: 0.5, 0.7, 1.0, 3.0, 5.0, 10.0 μm
- Counting efficiency: 50% at 0.5 μm 100% at > 0.75 μm according to JIS
- ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration
- Ethernet, USB
- Incl. temperature and humidity sensor
- Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

- Measuring range: 0.5 ... 25 μm
- Measurement channel sizes: 0.5, 0.7, 1.0, 3.0, 5.0, 10.0 μm
- Counting efficiency: 50% at 0.5 μm, 100% at > 0.75 μm according to JIS
- Ethernet, USB
- Incl. temperature and humidity sensor
- Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

PCE-VS11 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features a red and green visual warning or alarm with programmable high pass and low pass filters.

- Frequency range (max.): 0.1 Hz ...10 kHz
- Measuring range: Acceleration = 0.1 ... 1000 m/s², Speed = Frequency-dependent
- Connections: Screw terminals for power supply (5 ... 30V DC) and Micro USB (internal)
- Mounting: M8 stud bolt

The condition monitoring / belt tension meter is an optical measuring instrument for determining the belt tension force. This force measuring device consists of a display unit and a sensor on a gooseneck cable. The condition monitoring meter measures the tension of the belt in a stationary state.

- Measures the oscillation frequency of the belt
- Measuring range: 10 ... 900 Hz
- Accuracy: ± (1% of rdg. + 4 digits)
- Resolution: <100 Hz: 0.1 Hz
                       >100 Hz: 1 Hz
- Memory for 750 measured values
- Length of gooseneck sensor 16 cm
- incl. ISO Calibration Certificate