- Infrared measuring range: -40 ... 300°C / -40 ... 572°F
- Sensor measuring range: -40 ... 300°C / -40 ... 572°F
- Charging station with micro USB cable
- Bluetooth interface
- incl. ISO-Calibration Certificate

PCE-TC 28 is an infrared thermometer designed for non-contact temperature measurement. This infrared thermometer has adjustable emissivity and captures infrared images. This infrared thermometer also can take normal pictures, as well as a mixture of both normal and infrared, due to the built-in digital camera.

- Measurement range: -20 ... +600°C / -4 ... 1112°F
- Accuracy: ± 2%, ± 2°C / 3.6°F
- Frequency image recording: 9 Hz
- Camera: 32 x 31 Pixel
- incl. ISO Calibration Certificate

This contact thermometer is a two-channel measuring instrument. The contact thermometer offers a wide range of measurement options.

- K-type thermometer with dual input
- Temperature range: -210 ... 1372 °C / -346 ... 2501 °F
- Direct measurement / differential measurement (T1-T2)
- Electronic zero offset
- Readings in °C, °F or Kelvin (K)
- incl. ISO Calibration Certificate

The thermometer has a resolution of 320 x 240 pixels. With a measuring range of -20 ... 300 °C, the thermometer already covers a large temperature range. The emission value of the thermometer can be set to carry out measurements on different surfaces.

- Measuring range: -20 ... 300 °C / -4 ... 572 °F
- Infrared and real image resolution: 320 x 240 pixels
- Picture in picture function
- USB-C interface
- Refresh rate: 9Hz
- Storage for about 20,000 images
- incl. ISO Calibration Certificate

- Measuring range: 0.5 ... 25 μm
- Measuring channel sizes: 0.5, 0.7, 1.0, 3.0, 5.0, 10.0 μm
- Counting efficiency: 50% at 0.5 μm 100% at > 0.75 μm according to JIS
- ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration
- Ethernet, USB
- Incl. temperature and humidity sensor
- Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

- Infrared measuring range: -40 ... 300°C / -40 ... 572°F
- Sensor measuring range: -40 ... 300°C / -40 ... 572°F
- Charging station with micro USB cable
- Bluetooth interface

A gloss meter is a tester for determining surface gloss. Thereby, with the glossmeter, spectral reflections of a light beam that hits the surface, are measured. The touch screen allows for easy navigation.

- Measuring geometries: 20° / 60° / 85°
- Measuring range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate

- Measuring range: 0.5 ... 25 μm
- Measurement channel sizes: 0.5, 0.7, 1.0, 3.0, 5.0, 10.0 μm
- Counting efficiency: 50% at 0.5 μm, 100% at > 0.75 μm according to JIS
- Ethernet, USB
- Incl. temperature and humidity sensor
- Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

- Measuring range: 0 ... 12 A DC
- Three different test functions
- PC interface for data transfer
- Switchable graphic view
- Application, e.g. photovoltaic systems
- incl. ISO Calibration Certificate

The combination PCE-T 260 is a measuring instrument for use in maintenance, and production. In addition to the stroboscope function, the condition monitoring tachometer-stroboscope also has the option of removing the rotational contacts and measuring temperatures.  

- Optical tachometer
- Measuring range: 5 ... 99999 rpm
- Contact tachometer
- Stroboscope LED
- Temperature measurement: Type K, PT 1000, Infrared
- LED Flash frequency: 100 ... 99990 FPM
- Temperature measurement: Type K, PT 1000
- Infrared
- Incl. ISO calibration certificate (only for the tachometer function)

- Measuring range: 0.3 ... 25 μm
- Measurement channel sizes: 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 μm
- Counting efficiency: 50% at 0.3 μm, 100% at > 0.45 μm according to JIS
- CO2 Sensor: 0 ... 5000 ppm
- Ethernet, USB
- Includes temperature and humidity sensor
- Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

The humidity detector allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the humidity detector dries the material to be weighed, and then calculates the moisture content from the weight difference.

- Testing or weighing capacity: 110 g / 3.88 oz
- Readability: 1 mg / 0.001 g / 0.01 %
- Adjustable drying temperature and time
- incl. ISO Calibration Certificate

The digital thermometer has a resolution of 320 x 240 pixels. With a measuring range of -20 ... 300 °C, the digital thermometer already covers a large temperature range. The emission value of the digital thermometer can be set to carry out measurements on different surfaces.

- Measuring range: -20 ... 300 °C / -4 ... 572 °F
- Infrared and real image resolution: 320 x 240 pixels
- Picture in picture function
- USB-C interface
- Refresh rate: 9Hz
- Storage for about 20,000 images
- incl. ISO Calibration Certificate

A gloss meter is a tester for determining surface gloss. Thereby, with the glossmeter, spectral reflections of a light beam that hits the surface, are measured. The touch screen allows for easy navigation.

- Measuring geometries: 20° / 60° / 85°
- Measuring range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate

The Food Thermometer has a temperature measuring range of -20 ... 60 °C and a humidity measuring range of 0 ... 99.9% RH. The readings from the Food Thermometer can be read directly on the 2.3" color display.

Temperature measurement
- Measuring range: -20 ... 60 °C / -4 ... 140 °F
Humidity measurement
- Measuring range: 0 ... 99.9% RH
- Data memory for 12800 measuring points
- For mounting on the wall
- WiFi interface
- incl. ISO Calibration Certificate

The condition monitoring thermometer is a digital device with four input channels for type K and type J temperature sensors and two input channels for PT100 temperature sensors. The condition monitoring thermometer has a SD card slot (from 1 to 16 GB) for storing the measured data.

- 4 input channels for type-K, J temperature sensors
- 2 input channels for Pt100 temperature sensors
- 2 x type-K TF-500 temperature sensors are included in the package
- Sampling rate: 1/ sec.
- SD card memory (1 ... 16 GB)
- Incl. ISO calibration certificate

The condition monitoring sound level meter is a class 2 data logging sound level meter that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high-accuracy condition monitoring sound level meter has a large easy-to-read illuminated LCD screen that displays the sound pressure level (SPL) numerically and graphically in real time. The sound level data logger calculates the equivalent continuous sound level Leq (LXeq).

- Measuring range: 25 ... 136 db(A)
- LXY (SPL), Leq (LXeq), LXYSD, LXSEL, LXE, LXYmax, LXYmin, LXPeak, LXN
- Frequency weighting: A, B, C and Z
- Time weighting: Fast (125 ms), slow (1 sec) and impulse (35 ms), decay (1500 ms)
- adjustable data-recording interval from 1 s ... 24 h
- 1/1 octave band filter (optional 1/3 octave band filter upgrade)
- incl. ISO Calibration Certificate