1. You are here:
  2. Home
  3. Products for 'Coating Thickness Gauge PCE CT 80 '
Surface Tester PCE-CT 80-F5N3
£ 792.00
Price excl. VAT &. delivery
2 year Warranty
The surface tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the surface tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 5000 µm, NFe: 0 ... 3000 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Details
Material Tester PCE-CT 80-F5N3
£ 792.00
Price excl. VAT &. delivery
2 year Warranty
The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 5000 µm, NFe: 0 ... 3000 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Details
Car Measuring Device PCE-CT 80-F5N3
£ 792.00
Price excl. VAT &. delivery
2 year Warranty
The car measuring device is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the car measuring device, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 5000 µm, NFe: 0 ... 3000 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Details
Coating Thickness Meter PCE-CT 22BT
£ 324.00
Price excl. VAT &. delivery
2 year Warranty
Wireless
With this Coating Thickness Meter, layer thicknesses on metallic surfaces can be reliably determined. The Coating Thickness Meter has a measuring range of 1500 µm. This means that the Coating Thickness Meter is used, for example, in a paint shop, for incoming goods inspection or for an expert.

- Measuring range up to 1500 µm
- Measurable substrates: Fe, NFe
- Probe: internal
- Micro USB and Bluetooth interface
- Data storage for up to 600 measured values
Details
Automotive Tester PCE-CT 80-FN3
£ 783.00
Price excl. VAT &. delivery
2 year Warranty
The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 3000 µm, NFe: 0 ... 3000 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Details
Car Measuring Device PCE-CT 80-FN3
£ 783.00
Price excl. VAT &. delivery
2 year Warranty
The car measuring device is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the car measuring device, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 3000 µm, NFe: 0 ... 3000 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Details
Car Measuring Device PCE-CT 80-FN2D5
£ 778.00
Price excl. VAT &. delivery
2 year Warranty
The car measuring device is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the car measuring device, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 2500 µm, NFe: 0 ... 2500 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Details
Thickness Gauge PCE-CT 29
£ 345.00
Price excl. VAT &. delivery
2 year Warranty
The thickness gauge has a measuring range of 0 ... 2000 µm. The thickness gauge can be used to measure the coating thickness on ferrous (Fe) and non-ferrous (NFe) metals.

- Measuring range: 0 ... 2000 µm
- Temperature Measuring range: 0 ... 50 °C 
- Humidity Measuring range: 0 ... 100 % r. h.
- with SSPC measuring function 
- Individually adjustable limit value alarms  
- Data memory with up to 2500 measured values
Details
Paint Thickness Tester PCE-CT 100N
£ 1,362.00
Price excl. VAT &. delivery
2 year Warranty
Wireless
The thickness gauge works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the thickness gauge are used for the non-destructive testing of materials.

- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via wifi and USB
- Two different probes for NFe and Fe (included)
Details
Car Measuring Device PCE-CT 80-FN1D5
£ 756.00
Price excl. VAT &. delivery
2 year Warranty
The car measuring device is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the car measuring device, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 1500 µm, NFe: 0 ... 1500 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Details
Automotive Tester PCE-CT 80-FN2D5
£ 778.00
Price excl. VAT &. delivery
2 year Warranty
The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 2500 µm, NFe: 0 ... 2500 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Details
Automotive Tester PCE-CT 80-FN1D5
£ 756.00
Price excl. VAT &. delivery
2 year Warranty
The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 1500 µm, NFe: 0 ... 1500 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Details
Surface Testing - Coating Thickness Gauge PCE-CT 5000H
£ 346.00
Price excl. VAT &. delivery
2 year Warranty

PCE-CT 5000H is a surface-testing coating thickness measuring instrument used for the rapid determination of coating thicknesses on ferrous (Type F) and non-ferrous (Type N) metals. The coating thickness gauge automatically detects the type of metal to be measured.


- Type F measuring range: 0 ... 5000 µm / 0 ... 5 mm / 0 ... 196 mils
- Type N measuring range: 0 ... 3000 µm / 0 ... 3 mm / 0 ... 118 mils
- Displays measuring units in μm, mm or mils
- Saves up to 2000 measurements to internal memory
- Practical V-groove on the measuring head

Details
Thickness Gauge PCE-CT 5000H
£ 346.00
Price excl. VAT &. delivery
2 year Warranty

PCE-CT 5000H is a thickness measuring instrument used for the rapid determination of coating thicknesses on ferrous (Type F) and non-ferrous (Type N) metals. The coating thickness gauge automatically detects the type of metal to be measured.


- Type F measuring range: 0 ... 5000 µm / 0 ... 5 mm / 0 ... 196 mils
- Type N measuring range: 0 ... 3000 µm / 0 ... 3 mm / 0 ... 118 mils
- Displays measuring units in μm, mm or mils
- Saves up to 2000 measurements to internal memory
- Practical V-groove on the measuring head

Details
Automotive Tester PCE-CT 80-F5N3
£ 792.00
Price excl. VAT &. delivery
2 year Warranty
The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 5000 µm, NFe: 0 ... 3000 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Details
Surface Tester PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate
£ 912.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The surface tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the surface tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 3000 µm, NFe: 0 ... 3000 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
- incl. ISO-Calibration Certificate
Details
Thickness Gauge PCE-CT 29-ICA incl. iso calibration certificate
£ 471.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The thickness gauge has a measuring range of 0 ... 2000 µm. The thickness gauge can be used to measure the coating thickness on ferrous (Fe) and non-ferrous (NFe) metals.

- Measuring range: 0 ... 2000 µm
- Temperature Measuring range: 0 ... 50 °C 
- Humidity Measuring range: 0 ... 100 % r. h.
- with SSPC measuring function 
- Individually adjustable limit value alarms  
- Data memory with up to 2500 measured values
 - incl. ISO Calibration Certificate
Details
Surface Tester PCE-CT 80-FN2-ICA incl. ISO-Calibration Certificate
£ 894.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The surface tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the surface tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 2000 µm, NFe: 0 ... 2000 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
- incl. ISO-Calibration Certificate
Details