- Air temperature: -20 ... 60 °C / -4 ... 140 °F
- Humidity: 0 … 100% RH
- Wet bulb temperature, dew point
- Data memory for 32,000 readings
- Type K thermocouple

With the climate meter it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the climate meter. The climate meter can therefore be used universally because of its various measuring functions to determine the ambient conditions.

Measuring ranges:
- Humidity: 0 ... 100% RH
- Ambient temperature: -20 ... 60 °C / -4 ... 140 °F
- Wet bulb temperature: 0 ... 60 °C / 32 ... 140 °F
- Dew point temperature: -20 ... 60 °C / -4 ... 140 °F
- Interface: Bluetooth
- MIN / MAX / HOLD function
- incl. sinter filter

- HCHO measuring range: 0.00 … 5.00 mg/m³
- TVOC measuring range: 0.00 … 9.99 mg/m³
- Temperature measuring range: 0 … 50 °C / 32 … 122 °F
- Humidity measuring range: 0 … 100% RH
- Memory for 5000 measuring points
- Battery and mains operation

Climate meter with 0 ... 10 V output. Climate meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 0 ... 10 V
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

- Measurement of all relevant environmental parameters
- Wind speed
- Temperature
- Humidity
- Sound level
- Light
- High accuracy
- MIN, MAX, HOLD function

Moisture meter for liquid materials are used in boiler installations, water-dosing and diesel oil emulsion dispersion systems. The scope of supply can include the control cabinet to operate the valves regulating water feed. The moisture meter for liquid materials has a processing unit with RS232/RS485 interfaces.

- Measurement range: 0 ... 100 %
- Limits of permissible absolute error of the measurements: Δ= 0,035 +0,05·W
- Temperature measurement range: -40 ... +150 °C

- Measurement of all relevant environmental parameters
- Wind speed
- Temperature
- Humidity
- Sound level
- Light
- High accuracy
- MIN, MAX, HOLD function

The Class 1 IoT meter can be used, e.g, for sound measurement of street noise, aircraft and train noise, event noise, noise coming from construction sites, ports, factories involving heavy machinery, airport/bus stations, stadiums, horse/motor racing tracks etc. The weather conditions do not matter, and hail, snow, rain and similar are no problem for this system for outdoor noise monitoring. The IoT meter is equipped with a GPS receiver which allows the user to assign the measured values to an exact position.

 

- Accuracy class 1
- GPS function
- A, B, C & Z frequency rating
- Fast, Slow, Pulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- Incl. Outdoor Alarm Noise Meter Kit PCE-4xx-EKIT
- Outdoor measurement of sound and noise

The temperature / humidity climate meter is a data logger has a memory of 20,010 sets of measurements and allows use of up to several months. The temperature / humidity climate meter is particularly suitable for measuring tasks where it is not possible for the user to install software for reading the measured values.

- Measuring range temp.: -30 ... 60 °C / -22 ... 140 °F
- Measuring range rel. humidity: 0 ... 100% RH
- Measurement protocol as PDF
- Data export possible as CSV
- Readable without software
- 20,010 sets of measured values can be stored
- incl. ISO Calibration Certificate

The PCE-HT 71N climate meter detects air temperature and humidity and stores readings in its internal memory. The climate meter has a compact format and a wide memory capacity (up to 32,000 values / 16,000 values for each parameter) and it is mainly used as a data logger in fields such as supermarket refrigeration units, refrigerated transport, warehouses, and other temperature controlled environments.

- Measurement range: 0 ... 100% RH / -35 ... 70°C / -31 ... 176°F
- Accuracy: ± 3% RH (20 ... 80%) and  ± 5% / ± 1°C (1.8°F)
- Resolution: 0.5% RH / 0.1°C (0.18°F)
- Memory: Max. 32,000 measurement data (16,000 for each parameter (humidity / temperature))
- Incl. ISO calibration certificate 

- HCHO measuring range: 0.00 … 5.00 mg/m³
- TVOC measuring range: 0.00 … 9.99 mg/m³
- Temperature measuring range: 0 … 50 °C / 32 … 122 °F
- Humidity measuring range: 0 … 100% RH
- Memory for 5000 measuring points
- Battery and mains operation

This climate meter with outside sensor is a real all-rounder. The wireless climate meter with outside sensor is easy to assemble based on the instructions provided. You do not have to be a professional to operate the wireless climate meter and outside sensors. The weather data of the climate meter with outside sensor for different parameters are sent up to 100 meters by radio signal to the main station.

- 2 displays
- Indoor temperature in Celsius or Fahrenheit
- Outside temperature in Celsius or Fahrenheit
- Indoor air humidity / outdoor air humidity
- Air pressure gauge in inHg or hPa
- Absolute or relative air pressure display selectable
- Precipitation indication in mm or inch
- Precipitation indicator for 1 hour, 24 hours, 1 week, 1 month
- Wind speed in mph, km / h, m / s, knots ...
- Wind direction indicator
- Wind chill temperature gauge
- Weather forecast, trend indicator, storm warning
- and much more...

Measuring function
- Temperature: -40 ... 125°C / -40 ... 257°F (external)
- Humidity: 0 ... 100% rh (external)
- Memory for 25,920 readings
- Saves as PDF

PCE-HVAC 3 is a multifunction climate meter, tester or diagnostic measuring device used for indoor climate and environmental monitoring. In addition to measuring relative humidity and ambient room / dry-bulb temperature, the meter calculates dew-point and wet-bulb temperatures in degrees Celsius (°C) and Fahrenheit (°F). Thus, heating, ventilation and air conditioning (HVAC) installations and HVAC system performance assessments are key applications of the PCE-HVAC 3 meter.

- Relative humidity measuring range: 0 ... 100% RH
- Ambient / dew-point temp. range: -30 ... 100°C / -22 ... 212°F
- Wet-bulb temp. range: 0 ... 80°C / 32 ... 176°F