2 year Warranty
PCE-DD-D is a Shore D durometer or hardness tester. This Shore D durometer uses an impact rod with a 30º conical point and 50 Newtons (N) of force to make a surface indentation on material samples with a minimum thickness of 6 mm or 0.24". Calibration is not available for this item.
- For Shore D hardness testing of hard rubber, hard resin, acrylic, glass,
thermoplastic and more
- Measurement range: 0 ... 100 Shore D
- Accuracy: ± 2 Hardness - Grade
Mechanical shore durometer for measuring hardness of soft elastomer with drag needle. The shore durometer is composed of a single component with a measuring head and a 360º dial. To improve the readability of peak value, the device comes with a drag needle, that ensures the maximum reading can be captured. Once it has been measured, it can be reset to zero.
- Force of pressure: 0 to 12.5 N
- Penetrating body: 35º (according to Shore A)
- Equipped with drag needle
- Measurement range: 10 ... 90
(pressure diminishes below 10 and above 90)
- Margin of error: ± 1
- Division of scale: 1
The PCE-DDA 10 shore Material Tester is an ergonomic device to check Shore hardness in gum, plastic and other non-metallic materials. It has been designed with a very high quality. The PCE-DDA 10 Material Tester is mainly used for soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. It has a reading accuracy of 0.1 hardness units.
- Handheld device
- For Shore A measurements
- Single and Serial Measurements
- Data transfer to pc
- Incl. ISO Calibration Certificate
The PCE-VE 1036HR-F is a versatile inspection instrument. Various borescope or borescope camera cables with different characteristics can be connected to the borescope. A special advantage of this industrial borescope is the large display, which offers the user the best possible overview of the area to be viewed due to its dimensions and resolution. The borescope camera allows the recording of pictures and videos, whereby the videos are additionally stored with an audio recording. The clear resolution is also clear when the images are stored in the endoscope by touching the stylus on the inserted SD card.
- 2-way borescope cable (cable / camera head diameter: 6 mm / 0.24 in)
- Storing images and video
- 8 GB Memory Card incl.
Due to its compact design, the PCE-2550-ICA material tester is easy to use for incoming and outgoing inspections. Due to the adjustable hardness scales, the material tester is very versatile.
- Measuring ranges: 170 ... 960 HLD
- Measurement direction: 360°
- Impact device: Type D
- Measurement units: HL, HB, HRB, HRC, HRA, HV, HS
- Internal measurement memory
- incl. ISO Calibration Certificate
FME is a handheld paper moisture meter for accurate measurement of the moisture content of paper, wood and building materials. The moisture meter features preset characteristic curves for material-specific moisture measurement. To detect moisture, the moisture meter requires external sensors (sold separately - see accessories) that can either be inserted into a material or placed on a material's surface, allowing for either destructive or non-destructive measurement.
- Measuring range: 5-99% for wood / 0-99% for building materials
- Resolution: 0.1%
- Accuracy: ±0.2%
PCE-HT-225A is a heavy-duty concrete hardness tester or concrete test hammer, also called a concrete rebound hammer or Swiss hammer, used to measure surface hardness and material compression strength. Suitable for use with concrete, rock and building materials, this rugged, manufacturer-calibrated rebound hammer is both easy to use and built to last.
- Test range: 10 ... 60 MPa or 100 ... 600 kg/cm² (1450 ... 8702 psi)
- Impact energy: 2.207 J or N-m / 1.6278 ft-lb or Type N
- Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
- Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
- kg/cm², psi, and MPa conversion tables
- Optional test anvil to verify accuracy listed under accessories
The automotive tester PCE-VE 1036HR-F is a versatile inspection instrument or industrial camera. Various videoscope or endoscope cables with different characteristics can be connected to the automotive tester. A special advantage of the automotive tester is the large display, which offers the user the best possible overview of the area to be viewed due to its dimensions and resolution. The automotive tester camera allows the recording of pictures and videos, whereby the videos are additionally stored with an audio recording.
- 3 m / 9.8 ft endoscope cable with 2-way camera cable
- Stores images and video
- 8 GB Memory Card incl.
The PCE-VE 1036HR-F is a versatile car measuring device. Various videoscope or endoscope cables with different characteristics can be connected to the car measuring device. A special advantage of the car measuring device is the large display, which offers the user the best possible overview of the area to be viewed due to its dimensions and resolution. The endoscope camera allows the recording of pictures and videos, whereby the videos are additionally stored with an audio recording.
- 3 m / 9.8 ft endoscope cable with 2-way camera cable
- Stores images and video
- 8 GB Memory Card incl.
The NDT test instrument PCE-VE 1036HR-F is a versatile inspection instrument or industrial camera. Various videoscope or endoscope cables with different characteristics can be connected to the NDT test instrument. A special advantage of the NDT test instrument is the large display, which offers the user the best possible overview of the area to be viewed due to its dimensions and resolution. The NDT test instrument camera allows the recording of pictures and videos, whereby the videos are additionally stored with an audio recording.
- 3 m / 9.8 ft endoscope cable with 2-way camera cable
- Stores images and video
- 8 GB Memory Card incl.
The Snake Camera PCE-VE 1036HR-F is a versatile inspection instrument. Various borescope or endoscope cables with different characteristics can be connected to the snake camera PCE-VE 1036HR-F. A special advantage of the snake camera PCE-VE 1036HR-F is the large display, which offers the user the best possible overview of the area to be viewed due to its dimensions and resolution.
- 2-way borescope cable (cable / camera head diameter: 6 mm / 0.24 in)
- Stores images and video
- 8 GB Memory Card incl.
The PCE-VE 1036HR-F is a versatile inspection instrument or industrial camera. Various videoscope or endoscope cables with different characteristics can be connected to the endoscope. A special advantage of the endoscope is the large display, which offers the user the best possible overview of the area to be viewed due to its dimensions and resolution. The endoscope camera allows the recording of pictures and videos, whereby the videos are additionally stored with an audio recording.
- 3 m / 9.8 ft endoscope cable with 2-way camera cable
- Stores images and video
- 8 GB Memory Card incl.