The PCE-GPA 50 electrical tester is used to measure the current of 1- or 3-phase loads. This electrical tester is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the electrical tester.

The PCE-GPA 50 Current Clamp is used to measure the current of 1- or 3-phase loads. This Current Clamp is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the Current Clamp.

The state-of-the-art data logger enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the data logger is performed by an internal pump.

- Particle concentration:  0.3  ... 10 μm

- Output in particles/m³, 

  particles/l or particles/28.3L

- Modbus RTU and MQTT via RS485

- Analogue output 4 . .. 20 mA

The state-of-the-art air samplerenables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the air sampler is performed by an internal pump.

- Particle concentration:  0.3  ... 10 μm

- Output in particles/m³, 

  particles/l or particles/28.3L

- Modbus RTU and MQTT via RS485

- Analogue output 4 . .. 20 mA

The state-of-the-art dust monitor enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the dust monitor is performed by an internal pump.

- Particle concentration:  0.3  ... 10 μm

- Output in particles/m³, 

  particles/l or particles/28.3L

- Modbus RTU and MQTT via RS485

- Analogue output 4 . .. 20 mA

The PCE-GPA 50 HVAC meter is used to measure the current of 1- or 3-phase loads. This HVAC meter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the HVAC meter.

The PCE-VMM 50 microscope is a video microscope with a large sample support surface of 380 x 225 mm / 15 x 8.9 in. This makes it possible to freely position even larger samples on the camera microscope.

The state-of-the-art air quality particle counting enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the air quality particle counting is performed by an internal pump.

- Particle concentration:  0.3  ... 10 μm

- Output in particles/m³, 

  particles/l or particles/28.3L

- Modbus RTU and MQTT via RS485

- Analogue output 4 . .. 20 mA

The Photometer PCE-TUM 50 is a portable device for measuring turbidity according to ISO 7027. This allows the user to quickly and easily determine important water parameters with the photometer and to check the quality of drinking water and waste water.

The state-of-the-art airborne particle-counting hygiene enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the airborne particle-counting hygiene is performed by an internal pump.

- Particle concentration:  0.3  ... 10 μm

- Output in particles/m³, 

  particles/l or particles/28.3L

- Modbus RTU and MQTT via RS485

- Analogue output 4 . .. 20 mA

The Colorimeter PCE-TUM 50 is a portable device for measuring turbidity according to ISO 7027. This allows the user to quickly and easily determine important water parameters with the Colorimeter and to check the quality of drinking water and waste water.

The PCE-GPA 50 Portable Power Analyzer is used to measure the current of 1- or 3-phase loads. This Portable Power Analyzer is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the Portable Power Analyzer.

The PCE-VMM 50 inspection camera is a video microscope with a large sample support surface of 380 x 225 mm / 15 x 8.9 in. This makes it possible to freely position even larger samples on the inspection camera.

The PCE-PFG force gage is a handy, digital measuring device for measuring tensile and compressive forces. The force gage offers a sampling rate of 500 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 100 measurements.

The PCE-PFG force gauge is a handy, digital measuring device for measuring tensile and compressive forces. The force gauge offers a sampling rate of 500 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 100 measurements.

- incl. ISO-calibration certificate

The PCE-GPA 50 1-phase power meter is used to measure the current of 1- or 3-phase loads. This 1-phase power meter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the power meter.

The 3-phase power meter / 3-phase power analyzer is used to measure the current of 1- or 3-phase loads. This 3-phase power meter / 3-phase power analyzer is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the power meter.