Products for 'Automotive Tester PCE CT 90 '

£ 756.00

Price excl. VAT &. delivery
2 year Warranty

The paint thickness tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint thickness tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 1500 µm, NFe: 0 ... 1500 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"

Thickness Meter PCE-CT 100N-ICA incl. ISO Calibration Certificate

£ 1,481.00

Price excl. VAT &. delivery
2 year Warranty

The coating thickness meter works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the coating thickness meter are used for the non-destructive testing of materials.

- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via Wifi and USB
- Two different probes for NFe and Fe (included)
- incl. ISO Calibration Certificate

Thickness Meter PCE-TG 300-NO5/90

£ 889.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-TG 300-NO5/90 is a thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness meter. Wall thicknesses under a coating can also be measured with the thickness meter.

- Measuring range: 1 ... 600 mm / 0.039 ... 23.62" (steel)
- Diameter: 10mm / 0.39"
- Sensor at 90° angle
- Minimum diameter of pipes: 20 x 3 mm / 0.787 ... 0.118"
- Frequency: 5 MHz
- Bluetooth

Thickness Gauge PCE-CT 100N-ICA incl. ISO Calibration Certificate

£ 1,481.00

Price excl. VAT &. delivery
2 year Warranty

The coating thickness gauge works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the coating thickness gauge are used for the non-destructive testing of materials.

IoT Sensor PCE-CT 100N

£ 1,362.00

Price excl. VAT &. delivery
2 year Warranty

The IoT sensor works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the IoT sensor are used for the non-destructive testing of materials.

- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via wifi and USB
- Two different probes for NFe and Fe (included)

Automotive Tester / Stroboscope PCE-LES 103-ICA incl. ISO-Calibration Certificate

£ 556.00

Price excl. VAT &. delivery
2 year Warranty

The motion analysis of rotating machines is quick and easy with our automotive tester / stroboscope. The automotive tester / stroboscope is equipped with 3 high-power LEDs, collectively producing a light intensity of 11,730 Lux at 20 cm / 1000 Hz. With the automotive tester / stroboscope, you can adjust the flash frequency in both FPM and Hz. Additionally, it is compact, portable, and operates independently thanks to the built-in battery.

- Flash frequency 60 ... 300,000 FPM

- Brightness 3 High Power LEDs

- Accuracy: 0.001%

- 6160 lux at 30 cm / 1000 Hz

- Digital pulse width modulation

- Phase shift - 360° ... + 360°

- Quick adjustment with x2 and ÷2 buttons

- Intuitive control buttons
- Clear display
- incl. ISO-Calibration Certificate

Material Tester PCE-CT 80-FN0D5-ICA incl. ISO Calibration Certificate

£ 738.00

Price excl. VAT &. delivery
2 year Warranty

The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 500 µm, NFe: 0 ... 500 µm
- Accuracy after foil calibration: ±(1% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
- incl. ISO Calibration Certificate

Automotive Tester PCE-MCM 10-ICA incl. ISO Calibration Certificate

£ 392.00

Price excl. VAT &. delivery
2 year Warranty

The automotive tester has a measurement range of ±99.9 mA DC. With an accuracy of 0.3% of rdg. +8 digits, the automotive tester is a particularly accurate measuring instrument. In order to conveniently perform measurements with the automotive tester, the current clamp itself is connected to a 1 meter / 3.3 ft cable.

- Measuring range 1: ±20.99 mA DC

- Measuring range 2: ±21.0 … ±99.9 mA DC

- Diameter of clamp opening: Ø5 mm

- Detachable automotive tester with 1 m / 3.3 ft cable

- Incl. ISO Calibration Certificate

Surface Testing - Automotive Tester / Borescope PCE-VE 340N

£ 1,002.00

Price excl. VAT &. delivery
2 year Warranty

PCE-VE 340N is an automotive tester, borescope, inspection camera or industrial endoscope for the non-destructive inspection (NDI) of engines, machines and more. This industrial borescope is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head features 4 LED lights with automatic illumination. In addition, digital image magnification or zoom of up to 2 times is available.

- Diameter camera head: Ø 5.5mm / 0.22"
- Interface: Mini-USB 1.1 and AV out
- Memory: 8 GB SD memory card (incl.)
- Cable length: 10 m / 32 ft 9"

Automotive Tester PCE-OM 15-ICA Incl. ISO Calibration Certificate

£ 481.00

Price excl. VAT &. delivery
2 year Warranty

PCE-OM 15-ICA is an automotive tester with trigger functionality. This easy-to-use portable digital stroboscope gun features high / low range selection and push-button rate control to scale the flash rate slower (x½) and faster (x2). In addition, two knobs allow coarse and fine adjustment of the flash rate.

- Measuring range: 50 ... 30000 rpm
- Bright 6500K xenon light bulb
- 10 mm / 0.4 in 5-digit LCD
- Incl. ISO Calibration Certificate

Material Thickness Meter PCE-CT 100N

£ 1,362.00

Price excl. VAT &. delivery
2 year Warranty

The material thickness meter works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the material thickness meter are used for the non-destructive testing of materials.

Surface Testing - Automotive Tester / Borescope PCE-VE 333HR

£ 814.00

Price excl. VAT &. delivery
2 year Warranty

PCE-VE 333HR is an automotive tester, borescope, inspection camera or endoscope for the non-destructive inspection (NDI) of engines, machines and more. This automotive tester is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head features 6 LED lights (4 front, 2 side) for better illumination when using the mirrors. In addition, digital image magnification or zoom of up to 2 times is available, plus boost function for improved image quality in the dark.

- With boost function: better images in dark surroundings
- 2 additional side LEDs for better lighting
- Image rotation possible
- Diameter: Ø 6 mm / 0.24", length: 3 m / 9ft 10"
- Interface: Mini-USB 1.1 and AV out
- Memory: 8 GB SD memory card (incl.)

Automotive Tester PCE-VE 180

£ 262.00

Price excl. VAT &. delivery
2 year Warranty

The automotive tester PCE-VE 180 is a rechargeable handheld pistol-grip videoscope or video borescope inspection camera with video recording and image capture functionality. Equipped with built-in LED lighting on the waterproof camera tip, the automotive tester features a detachable remote control with integrated 3.5" LCD for easy viewing and navigation. The remote control communicates using radio transmission at 2.4 GHz.

- Semi-flexible gooseneck cable
- 1 m / 3.28 ft cable length
- 3.9 mm / .16 in camera cable diameter
- Includes detachable 4.5 mm / .18 in mirror, hook and magnet

Coating Thickness Gauge PCE-CT 100N

£ 1,362.00

Price excl. VAT &. delivery
2 year Warranty

Automotive Tester PCE-MCM 10

£ 254.00

Price excl. VAT &. delivery
2 year Warranty

- Measuring range 1: ±20.99 mA DC

- Measuring range 2: ±21.0 … ±99.9 mA DC

- Diameter of clamp opening: Ø5 mm

- Detachable automotive tester with 1 m / 3.3 ft cable

Automotive Tester PCE-CTI 10

£ 324.00

Price excl. VAT &. delivery
2 year Warranty

The automotive tester is the ideal measuring device for measuring voltages up to 1500 V AC/DC and currents up to 1000 A AC/DC. The current measurement with the automotive tester is inductive. To do this, the supply line is placed in the automotive tester.

- Measuring range: 0 ... 1500 V AC/DC
- Free app for Android and iOS
- Data logging for up to 100,000 measured values
- Inrush current measurement
- Insulation categories: CAT IV 600 V, CAT III 1000 V, CAT II 1500 V

Car Measuring Device PCE-CT 100N

£ 1,362.00

Price excl. VAT &. delivery
2 year Warranty

The car measuring device works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the car measuring device are used for the non-destructive testing of materials.

Thickness Gauge PCE-TG 300-NO5/90

£ 889.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-TG 300-NO5/90 is a thickness gauge for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness gauge. Wall thicknesses under a coating can also be measured with the thickness gauge.

- Measuring range: 1 ... 600 mm / 0.039 ... 23.62" (steel)
- Diameter: 10mm / 0.39"
- Sensor at 90° angle
- Minimum diameter of pipes: 20 x 3 mm / 0.787 ... 0.118"
- Frequency: 5 MHz
- Bluetooth