The state-of-the-art air samplerenables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the air sampler is performed by an internal pump.

- Particle concentration:  0.3  ... 10 μm

- Output in particles/m³, 

  particles/l or particles/28.3L

- Modbus RTU and MQTT via RS485

- Analogue output 4 . .. 20 mA

The state-of-the-art dust monitor enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the dust monitor is performed by an internal pump.

- Particle concentration:  0.3  ... 10 μm

- Output in particles/m³, 

  particles/l or particles/28.3L

- Modbus RTU and MQTT via RS485

- Analogue output 4 . .. 20 mA

The state-of-the-art particle counter enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the particle counter is performed by an internal pump.

- Particle concentration:  0.3  ... 10 μm

- Output in particles/m³, 

  particles/l or particles/28.3L

- Modbus RTU and MQTT via RS485

- Analogue output 4 . .. 20 mA

The PCE-VMM 50 microscope is a video microscope with a large sample support surface of 380 x 225 mm / 15 x 8.9 in. This makes it possible to freely position even larger samples on the camera microscope.

The PCE-VMM 50 inspection camera is a video microscope with a large sample support surface of 380 x 225 mm / 15 x 8.9 in. This makes it possible to freely position even larger samples on the inspection camera.

The state-of-the-art air quality particle counting enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the air quality particle counting is performed by an internal pump.

- Particle concentration:  0.3  ... 10 μm

- Output in particles/m³, 

  particles/l or particles/28.3L

- Modbus RTU and MQTT via RS485

- Analogue output 4 . .. 20 mA

The Photometer PCE-TUM 50 is a portable device for measuring turbidity according to ISO 7027. This allows the user to quickly and easily determine important water parameters with the photometer and to check the quality of drinking water and waste water.

The state-of-the-art airborne particle-counting hygiene enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the airborne particle-counting hygiene is performed by an internal pump.

- Particle concentration:  0.3  ... 10 μm

- Output in particles/m³, 

  particles/l or particles/28.3L

- Modbus RTU and MQTT via RS485

- Analogue output 4 . .. 20 mA

The Colorimeter PCE-TUM 50 is a portable device for measuring turbidity according to ISO 7027. This allows the user to quickly and easily determine important water parameters with the Colorimeter and to check the quality of drinking water and waste water.

The anemometer PCE-EM 890 is an instrument for measuring environmental conditions. Thus, this anemometer is ideal for technicians, sailors, farmers and many more people who are dependent on the weather or whose activities are significantly influenced by the weather.

Measurement functions:

- Humidity / temperature

- UV

- Air pressure

- Volume flow

- Dew point

- Wet bulb temperature

- Windchill

- Heat stress index

- Height above sea level

- External temperature over Pt1000

The Durometer incl. test stand is a handy, digital measuring device for measuring tensile and compressive forces. The Durometer offers a sampling rate of 500 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 100 measurements. This kit contains a vertical materials test stand which is a motorized test station with a force range of up to 500 N.

The state-of-the-art particle counter dust measuring device enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the particle counter dust measuring device is performed by an internal pump.

- Particle concentration:  0.3  ... 10 μm

- Output in particles/m³, 

  particles/l or particles/28.3L

- Modbus RTU and MQTT via RS485

- Analogue output 4 . .. 20 mA

The Anemometer impresses with its compact design and various output signals. The Anemometer can be used for applications in warning technology, building automation and home technology.

- Measuring range: 0.8 m/s ... 50 m/s

- Measurement from: ≤0.8 m/s

- Output:  Adjustable relay

- IP 54 protection

- mA, V, pulse or Modbus output

The turbidity meter is a portable device for measuring turbidity according to ISO 7027. This allows the user to quickly and easily determine important water parameters with the turbidity meter and to check the quality of drinking water and waste water.

The inspection camera offers the possibility to enlarge small objects quickly and easily. During the analysis, the enlarged image on the inspection camera can be saved directly on the supplied Micro-SD card via mouse click.