Products for 'Air Flow Meter PCE WSAC 50 810 '

Air Quality Meter PCE-PQC 22EU Incl. Calibration Certificate

£ 4,521.00

Price excl. VAT &. delivery
2 year Warranty

The Air Quality Meter PCE-PQC 22EU detects quickly where e.g. particles, air particles contaminate the air and can cause diseases such as asthma, bronchitis, skin and lung diseases.

- Measuring range: 0.3 ... 25 μm
- Measuring channel sizes: 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 μm
- Counting efficiency: 50% at 0.3 μm 100% at > 0.45 μm according to JIS
- Ethernet, USB
- CO2 sensor
- Includes temperature and humidity sensor
- Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

Air Sampler PCE-CPC 50

£ 1,682.00

Price excl. VAT &. delivery
2 year Warranty

The state-of-the-art air samplerenables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the air sampler is performed by an internal pump.

- Particle concentration: 0.3 ... 10 μm

- Particle measurement channel sizes:

0.3, 0.5, 1.0, 2.5, 5.0, 10 µm

- Output in particles/m³,

particles/l or particles/28.3L

- Modbus RTU and MQTT via RS485

- Analogue output 4 . .. 20 mA

Air Quality Meter PCE-PQC 15EU Incl. Calibration Certificate

£ 4,125.00

Price excl. VAT &. delivery
2 year Warranty

The Air Quality Meter PCE-PQC 15EU detects quickly where e.g. particles, air particles contaminate the air and can cause diseases such as asthma, bronchitis, skin and lung diseases.

- Measuring range: 0.5 ... 75 μm
- Measuring channel sizes: 0.5, 1.0, 2.5, 5.0, 10.0, 30.0 μm
- Counting efficiency: 50% at 0.5 μm 100% at > 0.75 μm according to JIS
- ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration
- USB
- Incl. temperature and humidity sensor
- Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

Climate Meter Alarm Controller PCE-WSAC 50

£ 378.00

Price excl. VAT &. delivery
2 year Warranty

PCE-WSAC 50 is a climate meter alarm controller that displays the current wind speed as well as the average wind speed of the last 2 and 5 minutes. This climate meter alarm controller allows measurement of the slightest of wind movements. The climate meter alarm controller is used for a variety of wind monitoring applications in industries such as construction, mining, renewable energy and manufacturing.

- Pre-alarm and full alarm with visual and audible warnings
- Optional RS-485 modbus interface for data communication
- Measuring range: 0 ... 50 m/s or 0 ... 110 mph
- Incl. ISO calibration certificate

Wind Measurer PCE-WSAC 50W 24

£ 1,059.00

Price excl. VAT &. delivery
2 year Warranty

The Wind Measurer PCE-WSAC 50W is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the Wind Measurer means stormy gusts can also be monitored.

- Measuring range up to 180 km / h
- Input: pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analog output
- Supply voltage: 24V DC
- Ambient temperature -20 ... 70°C / -4 ... 158°F
- units adjustable: km / h, mph, m / s

Anemometer PCE-WSAC 50-110

£ 378.00

Price excl. VAT &. delivery
2 year Warranty

The Anemometer PCE-WSAC 50-110 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer can be used to monitor and alert on the current wind speed.

- Supply voltage: 230 V AC
- Input signal: 4 ... 20 mA
- 2 types of alarms
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

Anemometer PCE-WSAC 50-210

£ 378.00

Price excl. VAT &. delivery
2 year Warranty

The Anemometer PCE-WSAC 50-210 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 115 V AC
- Input signal: 4 ... 20 mA
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

Anemometer PCE-WSAC 50-220

£ 378.00

Price excl. VAT &. delivery
2 year Warranty

The Anemometer PCE-WSAC 50-220 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 115 V AC
- Input signal: 0 ... 10 V
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

Anemometer PCE-WSAC 50-310

£ 378.00

Price excl. VAT &. delivery
2 year Warranty

The Anemometer PCE-WSAC 50-310 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 24 V DC
- Input signal: 4 ... 20 mA
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

Anemometer PCE-WSAC 50-320

£ 378.00

Price excl. VAT &. delivery
2 year Warranty

The Anemometer PCE-WSAC 50-320 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 24 V DC
- Input signal: 0 ... 10 V
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

Anemometer PCE-WSAC 50-120

£ 378.00

Price excl. VAT &. delivery
2 year Warranty

The Anemometer PCE-WSAC 50-120 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 230 V AC
- Input signal: 0 ... 10 V
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

Wind Speed Meter PCE-WSAC 50W 24-ICA Incl. ISO Calibration Certificate

£ 1,175.00

Price excl. VAT &. delivery
2 year Warranty

The wind speed meter PCE-WSAC 50W 24-ICA is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. Due to the integrated 4 ... 20-mA analogue output of the wind speed meter, the measured data can also be transferred to other controllers for evaluation.

- Measuring range up to 180 km / h
- Input: pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analog output
- Supply voltage: 24V DC
- Ambient temperature -20 ... 70°C / -4 ... 158°F
- Units adjustable: km / h, mph, m / s
- Incl. ISO calibration certificate

Anemometer PCE-WSAC 50W 24

£ 1,059.00

Price excl. VAT &. delivery
2 year Warranty

The anemometer PCE-WSAC 50W is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the anemometer means stormy gusts can also be monitored.

- Measuring range up to 180 km / h
- Input: pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analog output
- Supply voltage: 24V DC
- Ambient temperature -20 ... 70°C / -4 ... 158°F
- units adjustable: km / h, mph, m / s

Ultrasonic Flow Meter PCE-TDS 200+ ML

£ 2,955.00

Price excl. VAT &. delivery
2 year Warranty

The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the

ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s

- Resolution: 0,001 m/s

- incl. sensor set

- Pipe size:
DN 50 ... 700 / 57 ... 720 mm,
DN 300 ... 6000 mm

- Temperature resistance: -30 ... 160 °C

- Temperature measurement up to 1800 °C

- for different media

- for different pipe materials

- Measuring parameters: flow velocity
volume flow, volume

temperature, heat output and heat quantity

- Interface: USB

- Cost display

- Data logger: 10 million measuring points

- LiPo battery

Wind Speed Meter PCE-WSAC 50W 230-ICA incl ISO calibration certificate

£ 1,175.00

Price excl. VAT &. delivery
2 year Warranty

The Wind Speed Meter PCE-WSAC 50W 230-ICA is useful for measuring the wind speed to help determine the preferred site for a wind turbine installation. The device also monitors the wind load on existing wind farms, as well as on cranes for safety purposes. Due to the integrated 4 ... 20-mA analogue output of the wind speed meter, the measured data can also be transferred to other controllers for evaluation.

- Measuring range up to 180 km / h
- Input: Pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analogue output
- Supply voltage: 110 ... 230V AC, 50/60 Hz
- Ambient temperature -20 .. . 70°C / -4 ... 158°F
- Units adjustable: km / h, mph, m / s
- Incl. ISO calibration certificate

Weather Station PCE-WSAC 50W 230-ICA incl ISO calibration certificate

£ 1,175.00

Price excl. VAT &. delivery
2 year Warranty

The Weather Station is useful for measuring the wind speed to help determine the preferred site for a wind turbine installation. The device also monitors the wind load on existing wind farms, as well as on cranes for safety purposes. Due to the integrated 4 ... 20-mA analogue output of the air flow meter, the measured data can also be transferred to other controllers for evaluation.

Air Quality Particle Counting PCE-CPC 50

£ 1,682.00

Price excl. VAT &. delivery
2 year Warranty

The state-of-the-art air quality particle counting enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the air quality particle counting is performed by an internal pump.

- Particle concentration: 0.3 ... 10 μm

- Particle measurement channel sizes:

0.3, 0.5, 1.0, 2.5, 5.0, 10 µm

- Output in particles/m³,

particles/l or particles/28.3L

- Modbus RTU and MQTT via RS485

- Analogue output 4 . .. 20 mA

Air Quality Meter PCE-PQC 20EU Incl. Calibration Certificate

£ 3,746.00

Price excl. VAT &. delivery
2 year Warranty

The Air Quality Meter PCE-PQC 20EU is very well suited for monitoring and checking of clean rooms, filter systems in operating rooms and filling systems in the pharmaceutical industry. The stored data records from the air quality meter can be read out and processed via the supplied software via Ethernet, USB or Wifi.

- Measuring range: 0.3 ... 25 μm
- Measurement channel sizes: 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 μm
- Counting efficiency: 50% at 0.3 μm, 100% at > 0.45 μm according to JIS
- Ethernet, USB
- Incl. temperature and humidity sensor
- Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921