- Measuring range: ± 0.03 ... ± 5 m / s
- Measuring accuracy: ± 1%
  (of the measured value)
- Pipe size: DN 25 ... 1200 mm
- Interface: RS232 & RS485
- Relay output
- incl. ISO Calibration Certificate

Air flow meter with 0 ... 10 V output. Air flow meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 0 ... 10 V
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

PCE-TDS 100HSH-ICA is a portable handheld clamp-on Clamp-on Ultrasonic Flow Meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 in ... 4in. Software sold separately - see accessories for details.

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 15 … 700, 20 … 720 mm (approx. 3/4 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, (N,W)
- Incl. sensors TDS-M1 and TDS-S1
- Incl. ISO Calibration Certificate

PCE-TDS 100HS is a portable handheld clamp-on Portable Ultrasonic Flow Meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 in ... 4in. Software sold separately - see accessories for details.

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 15 … 100, 20 … 108 mm (approx. 3/4 … 4")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, (N,W)
- Incl. sensors TDS-S1

- Measuring range: ± 0.03 ... ± 5 m / s
- Measuring accuracy: ± 1% of the measured value
- Pipe diameter: 25 ... 1200 mm (1 ... 48 in)
- Interface: RS232 & RS485
- Relay output
- incl. ISO Calibration Certificate

The Air Flow Meter PCE-WSAC 50-210 can be used in different fields of application. In use, the air flow meter carries out measurements from the smallest wind movements. The air flow meter  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 115 V AC
- Input signal: 4 ... 20 mA
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

The Air Flow Meter PCE-WSAC 50-320 can be used in different fields of application. In use, the air flow meter carries out measurements from the smallest wind movements. The air flow meter  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 24 V DC
- Input signal: 0 ... 10 V
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

The Air Flow Meter PCE-WSAC 50-110 can be used in different fields of application. In use, the air flow meter carries out measurements from the smallest wind movements. The air flow meter  can be used to monitor and alert on the current wind speed.

- Supply voltage: 230 V AC
- Input signal: 4 ... 20 mA
- 2 types of alarms
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

The Air Flow Meter PCE-WSAC 50-120 can be used in different fields of application. In use, the air flow meter carries out measurements from the smallest wind movements. The air flow meter  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 230 V AC
- Input signal: 0 ... 10 V
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

The Air Flow Meter PCE-WSAC 50-220 can be used in different fields of application. In use, the air flow meter carries out measurements from the smallest wind movements. The air flow meter  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 115 V AC
- Input signal: 0 ... 10 V
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

The Air Flow Meter PCE-WSAC 50-310 can be used in different fields of application. In use, the air flow meter carries out measurements from the smallest wind movements. The air flow meter  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 24 V DC
- Input signal: 4 ... 20 mA
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

The PCE-VA 20-SET is a multi-functional air velocity meter including flow hoods for assessing and balancing heating, ventilation and air conditioning or cooling (HVAC) installations. This multi-faceted anemometer-thermometer-hygrometer incorporates a 10 cm / 3.9" diam. fan impeller, easy-to-view backlit LCD, and useful functions, e.g. display hold, average val, maximum val, minimum val, auto power-off, low battery indication, and imperial/metric option.

- Measures air flow velocity, volume flow, relative humidity, air temperature, dew
  point temperature and wet-bulb temperature
- Air flow velocity range: 0.2 ... 30 m/s (39.4 ... 5905.5 fpm)
- Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of
  measured value + 0.3 m/s) when more than 20 m/s
- Resolution: 0.1°C / 0.18°F
- Includes 2 x capture hoods (1 x round 210 mm / 8.3 in Ø, 1 x square 346 x 346
  mm / 13.6 x 13.6 in)
- Incl. ISO Calibration Certificate