Dynamometer PCE-DFG 20 X
£ 703.00
Price excl. VAT &. delivery
The dynamometer records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The dynamometer is supplied with an external measuring cell and can measure forces up to 20 N.

  • Measuring range: 0 … 20 N
  • Resolution: 0.01 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 … 7200 Hz
Dynamometer PCE-DFG 5 X
£ 703.00
Price excl. VAT &. delivery
The dynamometer records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches.

  • Measuring range: 0 … 5 N
  • Resolution: 0.001 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 … 7,200 Hz
Force Gauge PCE-DFG 10 X
£ 703.00
Price excl. VAT &. delivery
The force measuring device records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches.

  • Measuring range: 0 … 10 N
  • Resolution: 0.005 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 … 7,200 Hz
Force Gauge PCE-DFG 20 X
£ 703.00
Price excl. VAT &. delivery
The force gauge records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches.

  • Measuring range: 0 … 20 N
  • Resolution: 0.01 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 … 7200 Hz
Force Gauge PCE-DFG 5 X
£ 703.00
Price excl. VAT &. delivery
The force gauge records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches.

  • Measuring range: 0 … 5 N
  • Resolution: 0.001 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 … 7,200 Hz
Hardness Tester PCE-DDA 10-ICA incl. ISO Calibration Certificate
£ 703.00
Price excl. VAT &. delivery
ISO Calibration

The PCE-DDA 10 shore hardness tester is an ergonomic device to check Shore hardness in gum, plastic and other non-metallic materials. It has been designed with a very high quality. The PCE-DDA 10 hardness tester is mainly used for soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. It has a reading accuracy of 0.1 hardness units.


  • Handheld device
  • For Shore A measurements
  • Single and Serial Measurements
  • Data transfer to pc
  • Incl. ISO Calibration Certificate

Material Tester PCE-DDA 10-ICA incl. ISO Calibration Certificate
£ 703.00
Price excl. VAT &. delivery
ISO Calibration

The PCE-DDA 10 shore Material Tester is an ergonomic device to check Shore hardness in gum, plastic and other non-metallic materials. It has been designed with a very high quality. The PCE-DDA 10 Material Tester is mainly used for soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. It has a reading accuracy of 0.1 hardness units.


  • Handheld device
  • For Shore A measurements
  • Single and Serial Measurements
  • Data transfer to pc
  • Incl. ISO Calibration Certificate

NDT Test Instruments PCE-DDA 10-ICA incl. ISO Calibration Certificate
£ 703.00
Price excl. VAT &. delivery
ISO Calibration

The PCE-DDA 10 shore hardness tester is an ergonomic device to check Shore hardness in gum, plastic and other non-metallic materials. It has been designed with a very high quality. The PCE-DDA 10 hardness tester is mainly used for soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. It has a reading accuracy of 0.1 hardness units.


  • Handheld device
  • For Shore A measurements
  • Single and Serial Measurements
  • Data transfer to pc
  • Incl. ISO Calibration Certificate

Checkweighing Scale PCE-MS B1,5T-1-M
£ 701.00
Price excl. VAT &. delivery
Verification for Trade / conformity assessment
As a beam scale, this verified checkweighing scale has the great advantage that it can be easily adapted to different weighing items by changing the beam spacing. This makes the checkweighing scale particularly suitable for weighing long goods.

  • Measuring range [Max]: 1500 kg / 3306 lb
  • Verification value [e]: 0.5 kg / 1.1 lb
  • Usable area beam [WxD]: 120 x 1200 mm / 4.7 x 47.2"
  • Interface: USB-B (bidirectional)
  • Battery and mains operation possible
  • Incl. verification (conformity-assessed)