Order no.: PCE-DD-A

The PCE-DD-A material tester is used to measure Shore A hardness in soft gums, rubber, elastomers and more. Calibration is not available for this item.

- Measurement area: 0 ... 100 Shore A
- Resolution: 0.5
- Accuracy: ± 1
- Depth of indentation: 0 ... 2.5 mm / .1 in
- Indenter: 35°

 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-POE 10
The PoE tester has 3 test modes. This enables the PoE tester to perform a continuity test of the Ethernet cables, to recognize the PoE types and to measure the PoE performance.
 
- Detection of the  PoE standard
- voltage measurement
- continuity test
- Cable types: STP, UTP
- Max. Cable length: 600 m
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-T312N
The PCE-T312N probe thermometer is a two-channel measuring instrument. The probe thermometer offers a wide range of measurement options. 

- K-type thermometer with dual input
- Temperature range: -210 ... 1372°C / -346 ... 2501°F
- Direct measurement / differential measurement (T1-T2)
- Electronic zero offset
- Readings in °C, °F or Kelvin (K)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-T312N
The PCE-T312N temperature meter is a two-channel measuring instrument. The temperature meter offers a wide range of measurement options. 

- K-type thermometer with dual input
- Temperature range: -210 ... 1372°C / -346 ... 2501°F
- Direct measurement / differential measurement (T1-T2)
- Electronic zero offset
- Readings in °C, °F or Kelvin (K)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: BDG 130

Ensure accurate, repeatable viscosity measurements with this flow cup viscometer test stand for use with PCE-125, PCE-127 and PCE-128 series flow cup viscometers. A must-have tool when conducting Ford, ISO or ASTM viscosity tests, this handy viscosity flow cup test stand:


- Affords hands-free viscosity measurement
- Allows for quick and easy height adjustment
- Features a built-in level for added convenience

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-T312N
The PCE-T312N thermometer is a two-channel measuring instrument. The thermometer offers a wide range of measurement options. 

- K-type thermometer with dual input
- Temperature range: -210 ... 1372°C / -346 ... 2501°F
- Direct measurement / differential measurement (T1-T2)
- Electronic zero offset
- Readings in °C, °F or Kelvin (K)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-POE 10
The Voltage Measuring Device PoE tester has 3 test modes. This enables the PoE tester to perform a continuity test of the Ethernet cables, to recognize the PoE types and to measure the PoE performance.
 
- Detection of the  PoE standard
- voltage measurement
- continuity test
- Cable types: STP, UTP
- Max. Cable length: 600 m
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HS 150N

PCE-HS 150N is an affordable digital hanging scale, crane scale, weighing hook or electronic balance that offers quick, easy and accurate weighing of large objects, animals, fish and game. Simply mount the item to be weighed to the hook or snap hook (both hooks are included). Useful for forklift and industrial applications and as well as recreational fishing and hunting, the PCE-HS 150N digital hanging scale features:


- Weight range up to 150 kg / 330 lbs
- Battery operation (3 x AA 1.5 V batteries provided)
- Auto-off, power-saving function (can be deactivated, if preferred) 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-191 CB

PCE-191 CB is a handheld, portable wire tracer, cable detector or cable fault meter used for locating wires and cables hidden behind walls and insulation.


- Power range: 220 to 240 V AC
- Frequency range: 50 / 60 Hz
- Acoustic alarm 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-0100

PCE-0100 is a handheld refractometer used to determine the salt content or % salinity ppt and salinity SG (specific gravity) of salt water, sea water and other solutions containing a concentration of salt. This portable pocket salinity refractometer has a double scale to allow the user to view both measurement parameters at once.


Measurement range:
  0 ... 100% salinity ppt, 1.000 ... 1.070 salinity SG
- Resolution: 1 % or 0.001
- Accuracy: ±0.1 %
 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-0100

PCE-0100 is a handheld refractometer used to determine the salt content or % salinity ppt and salinity SG (specific gravity) of salt water, sea water and other solutions containing a concentration of salt. This portable pocket salinity refractometer has a double scale to allow the user to view both measurement parameters at once.


- Measurement range: 0 ... 100% salinity ppt, 1.000 ... 1.070 salinity SG
- Resolution: 1 % or 0.001
- Accuracy: ±0.1 %

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: WTR 270

The WTR 270 temperature sensor for food industry is distinguished by its robust design (stainless steel or PTFE ). The WTR 270 temperature sensor for food industry is available in different lengths, so the device will be a great help for health inspectors.


- Different sensor lengths
- Stainless steel or PTFE versions
- Pt100 Class A

 

Manufacturer: Promesstec GmbH
Test Instruments manufacturer
Order no.: PCE-N25S
The Frequency Indicator PCE-N25S is used for processing standardised signals. Depending on your specific needs, the frequency indicator can be ordered with different inputs, such as 0...20 mA, 4...20 mA, 0...60 mV, 0...10 V, ±60 mV or ±10 V. The input signal of the frequency indicator is freely scalable, which increases its application possibilities.

 

- IP65 protected at the front
- 6 different standardised signal inputs available
- configuration via software
- 5-digit LED display

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-N25S
The Panel Indicator PCE-N25S is used for processing standardised signals. Depending on your specific needs, the panel indicator can be ordered with different inputs, such as 0...20 mA, 4...20 mA, 0...60 mV, 0...10 V, ±60 mV or ±10 V. The input signal of the panel indicator is freely scalable, which increases its application possibilities.

 

- IP65 protected at the front
- 6 different standardised signal inputs available
- configuration via software
- 5-digit LED display

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-N25S
The Power Indicator PCE-N25S is used for processing standardised signals. Depending on your specific needs, the power indicator can be ordered with different inputs, such as 0...20 mA, 4...20 mA, 0...60 mV, 0...10 V, ±60 mV or ±10 V. The input signal of the power indicator is freely scalable, which increases its application possibilities.

 

- IP65 protected at the front
- 6 different standardised signal inputs available
- configuration via software
- 5-digit LED display

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-N25S
The Pressure Indicator PCE-N25S is used for processing standardised signals. Depending on your specific needs, the pressure indicator can be ordered with different inputs, such as 0...20 mA, 4...20 mA, 0...60 mV, 0...10 V, ±60 mV or ±10 V. The input signal of the pressure indicator is freely scalable, which increases its application possibilities.

 

- IP65 protected at the front
- 6 different standardised signal inputs available
- configuration via software
- 5-digit LED display

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-N25S
The Process Indicator PCE-N25S is used for processing standardised signals. Depending on your specific needs, the process indicator can be ordered with different inputs, such as 0...20 mA, 4...20 mA, 0...60 mV, 0...10 V, ±60 mV or ±10 V. The input signal of the process indicator is freely scalable, which increases its application possibilities.

 

- IP65 protected at the front
- 6 different standardised signal inputs available
- configuration via software
- 5-digit LED display

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-N25S
The temperature indicator PCE-N25S is used for processing standardised signals. Depending on your specific needs, the digital universal indicator can be ordered with different inputs, such as 0...20 mA, 4...20 mA, 0...60 mV, 0...10 V, ±60 mV or ±10 V. The input signal of the digital universal indicator is freely scalable, which increases its application possibilities.

 

- IP65 protected at the front
- 6 different standardised signal inputs available
- configuration via software
- 5-digit LED display

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-N25T

The digital temperature indicator PCE-N25T is used for processing signals coming from temperature sensors. Depending on your specific needs, the digital indicator can be ordered with different inputs for thermocouples (type J, K) or resistance thermometers (Pt100). The input signal of the digital indicator is freely scalable, which increases its application possibilities.


- IP65 protected front
- For thermocouples and resistance thermometers
- Configuration via software
- 5-digit LED display

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-N25T

The digital indicator PCE-N25T is used for processing signals coming from temperature sensors. Depending on your specific needs, the digital indicator can be ordered with different inputs for thermocouples (type J, K) or resistance thermometers (Pt100). The input signal of the digital indicator is freely scalable, which increases its application possibilities.


- IP65 protected front
- For thermocouples and resistance thermometers
- Configuration via software
- 5-digit LED display

 

Manufacturer: PCE Instruments
Test Instruments manufacturer