Order no.: WTR 110
The WTR 110 Pt100 temperature sensor is equipped with a clamping screw. The WTR 110 Pt100 temperature probe meets the DIN 43763 standard. The WTR 110 Pt100 is available in 2 -., 3 - or 4-wire technology and offers the highest accuracy. The measuring insert is removable and can be replaced quickly in the event of a fault.

- Measuring range: - 50 ° C ... 400 ° C
- Accuracy: Class A
- Pt100 temperature sensor in 2 -, 3 - or 4-wire technology
Manufacturer: Promesstec GmbH
Test Instruments manufacturer
Order no.: WTR 430
The WTR 430 temperature sensor Pt100 features a smooth protective case without connection type, adn therefore a low price tag. The Pt100 sensor is permanently installed in the PT100 temperature sensor WTR 430.

- Measurement range: -50 ... +150 ºC 
- Fast response time
- Pt100 Class A 3-wire
Manufacturer: Promesstec GmbH
Test Instruments manufacturer
Order no.: PCE-C91P

The temperature controller PCE-C 91 is a very compact PID controller measuring 48 x 48 mm / 1.9 x 1.9" (1/16 DIN). To make safe and fast control possible, the temperature controller is equipped with a fuzzy controller. This changes the PID parameters in the temperature controller so that setpoints can be reached quickly but with little overshoot. Thanks to a measuring rate of 5 Hz, this temperature controller can also be used in fast processes.

 

- Input: 4 ... 20 mA
- Output: relay or analog (selectable)
- Sensor supply: 20 V
- Measuring time: 200 ms

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: RW-VBK
This accessory is a 6.5 m composite cable.
Manufacturer: CAS Deutschland AG
Test Instruments manufacturer
Order no.: WTR 120
The WTR 120 Pt100 temperature probe is a robust temperature probe without a neck tube. The Pt100 temperature probe can be directly connected to the WTR 120 Pt100 temperature probe via protective case. The WTR 120 Pt100 is available in 2 -., 3 - or 4-wire technology and offers the highest accuracy. The PT100 temperature sensor measuring insert is replaceable.

- Measuring range: - 50 ° C ... 400 ° C
- Accuracy class: A
- PT100 temperature sensor in 2 -, 3 - or 4-wire technology
Manufacturer: Promesstec GmbH
Test Instruments manufacturer
Order no.: PCE-191 CB

PCE-191 CB is a handheld, portable wire tracer, cable detector or cable fault meter used for locating wires and cables hidden behind walls and insulation.


- Power range: 220 to 240 V AC
- Frequency range: 50 / 60 Hz
- Acoustic alarm 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-191 CB

PCE-191 CB is a handheld, portable wire tracer, cable detector or cable fault meter used for locating wires and cables hidden behind walls and insulation.


- Power range: 220 to 240 V AC
- Frequency range: 50 / 60 Hz
- Acoustic alarm 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-191 CB

PCE-191 CB is a handheld, portable wire tracer, cable detector or cable fault meter used for locating wires and cables hidden behind walls and insulation.


- Power range: 220 to 240 V AC
- Frequency range: 50 / 60 Hz
- Acoustic alarm

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-T312N
The PCE-T312N contact thermometer is a two-channel measuring instrument. The contact thermometer offers a wide range of measurement options. 

- K-type thermometer with dual input
- Temperature range: -210 ... 1372°C / -346 ... 2501°F
- Direct measurement / differential measurement (T1-T2)
- Electronic zero offset
- Readings in °C, °F or Kelvin (K)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HS 150N

PCE-HS 150N is an affordable digital hanging scale, crane scale, weighing hook or electronic balance that offers quick, easy and accurate weighing of large objects, animals, fish and game. Simply mount the item to be weighed to the hook or snap hook (both hooks are included). Useful for forklift and industrial applications and as well as recreational fishing and hunting, the PCE-HS 150N digital hanging scale features:


- Weight range up to 150 kg / 330 lbs
- Battery operation (3 x AA 1.5 V batteries provided)
- Auto-off, power-saving function (can be deactivated, if preferred)

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CLL 1

The Data Logger PCE-CLL 1 allows for long-term measurement of current of 4 ... 20 mA. The Data Logger has an integrated USB port and can record up to 32,000 readings. This current data logger features a screw terminal for fixing the lead.


- Measuring range: 4 ... 20 mA
- LED warning lights
- Adjustable limits
- Software included
- Sampling rate: 1 sec.
- Memory size: 64 kB / 32,000 values
- USB interface

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-T312N
The PCE-T312N digital thermometer is a two-channel measuring instrument. The digital thermometer offers a wide range of measurement options. 

- K-type thermometer with dual input
- Temperature range: -210 ... 1372°C / -346 ... 2501°F
- Direct measurement / differential measurement (T1-T2)
- Electronic zero offset
- Readings in °C, °F or Kelvin (K)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DD-A

The PCE-DD-A durometer is used to measure Shore A hardness in soft gums, rubber, elastomers and more. This compact pocket sized tester is ideal for checking / testing rubber hardness (tyre condition checker). Calibration is not available for this item.

- Measurement area: 0 ... 100 Shore A
- Resolution: 0.5
- Accuracy: ± 1
- Depth of indentation: 0 ... 2.5 mm / .1 in
- Indenter: 35°

 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DD-D

PCE-DD-D is a Shore D durometer or hardness tester. This Shore D durometer uses an impact rod with a 30º conical point and 50 Newtons (N) of force to make a surface indentation on material samples with a minimum thickness of 6 mm or 0.24". Calibration is not available for this item.


- For Shore D hardness testing of hard rubber, hard resin, acrylic, glass,
  thermoplastic and more
- Measurement range: 0 ... 100 Shore D
- Accuracy: ± 2 Hardness - Grade

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-T312N
The PCE-T312N environment meter is a two-channel measuring instrument. The environment meter offers a wide range of measurement options. 

- K-type thermometer with dual input
- Temperature range: -210 ... 1372°C / -346 ... 2501°F
- Direct measurement / differential measurement (T1-T2)
- Electronic zero offset
- Readings in °C, °F or Kelvin (K)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: BDG 130

Ensure accurate, repeatable viscosity measurements with this flow cup viscometer test stand for use with PCE-125, PCE-127 and PCE-128 series flow cup viscometers. A must-have tool when conducting Ford, ISO or ASTM viscosity tests, this handy viscosity flow cup test stand:


- Affords hands-free viscosity measurement
- Allows for quick and easy height adjustment
- Features a built-in level for added convenience

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: BDG 130

Ensure accurate, repeatable viscosity measurements with this flow cup viscometer test stand for use with PCE-125, PCE-127 and PCE-128 series flow cup viscometers. A must-have tool when conducting Ford, ISO or ASTM viscosity tests, this handy viscosity flow cup test stand:


- Affords hands-free viscosity measurement
- Allows for quick and easy height adjustment
- Features a built-in level for added convenience

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HS 150N
PCE-HS 150N are affordable digital hanging scales, weighing hook that offers quick, easy and accurate weighing of large objects, animals, fish and game. Simply mount the item to be weighed to the hook or snap hook (both hooks are included). The hanging scales are useful for forklift and industrial applications, as well as recreational fishing and hunting. The PCE-HS 150N digital hanging scales feature:


- Weight range up to 150 kg / 330 lbs
- Battery operation (3 x AA 1.5 V batteries provided)
- Auto-off, power-saving function (can be deactivated, if preferred)

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DD-A

The PCE-DD-A hardness tester is used to measure Shore A hardness in soft gums, rubber, elastomers and more. Calibration is not available for this item.

- Measurement area: 0 ... 100 Shore A
- Resolution: 0.5
- Accuracy: ± 1
- Depth of indentation: 0 ... 2.5 mm / .1 in
- Indenter: 35°

 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DD-D

PCE-DD-D is a Shore D durometer or hardness tester. This Shore D hardness tester uses an impact rod with a 30º conical point and 50 Newtons (N) of force to make a surface indentation on material samples with a minimum thickness of 6 mm or 0.24 in. Calibration is not available for this item.


- For Shore D hardness testing of hard rubber, hard resin, acrylic, glass,
  thermoplastic and more
- Measurement range: 0 ... 100 Shore D
- Accuracy: ± 2 Hardness - Grade


Manufacturer: PCE Instruments
Test Instruments manufacturer