Order no.: PCE-DFG N 200
Digital dynamometer PCE-DFG N 200 for tensile force measurement and pressure force measurement up to 200 N. The PCE-DFG N 200 is a digital dynamometer for precise measurements with a resolution of 0.1 N. The dynamometer PCE-DFG N 200 can be found here in our shop to buy.

- Measuring range: 0 ... 200 N, 0 ... 44.96 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- Pull and pressure force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG N 5
Digital Dynamometer PCE-DFG N 5 for tensile force measurement and force measurement up to 5 N. The PCE-DFG N 5 is a digital dynamometer for precise measurements with a resolution of 0.001 N. The Dynamometer PCE-DFG N 5 can be purchased here in our shop.

- Measuring range: 0 ... 5 N, 0 ... 1.12 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- Pull and pressure force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG N 10
Digital force gauge PCE-DFG N 10 for tensile force measurement and force measurement up to 10 N. The PCE-DFG N 10 is a digital dynamometer for precise measurements with a resolution of 0.005 N. The Force gauge PCE-DFG N 10 can be purchased here in our shop.

- Measuring range: 0 ... 10 N, 0 ... 2.25 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- Pull and pressure force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG N 20
Digital force gauge PCE-DFG N 20 for tensile force measurement and force measurement up to 20 N. The PCE-DFG N 20 is a digital dynamometer for precise measurements with a resolution of 0.01 N. The force gauge PCE-DFG N 20 can be found here in our shop to buy. 

- Measuring range: 0 ... 20 N, 0 ... 4.5 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- Pull and pressure force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG N 200
Digital force gauge PCE-DFG N 200 for tensile force measurement and pressure force measurement up to 200 N. The PCE-DFG N 200 is a digital dynamometer for precise measurements with a resolution of 0.1 N. The Force gauge PCE-DFG N 200 can be found here in our shop to buy.

- Measuring range: 0 ... 200 N, 0 ... 44.96 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- Pull and pressure force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG N 5
Force Gauge PCE-DFG N 5 for tensile force measurement and force measurement up to 5 N. The PCE-DFG N 5 is a digital dynamometer for precise measurements with a resolution of 0.001 N. The Force Gauge PCE-DFG N 5 can be purchased here in our shop.

- Measuring range: 0 ... 5 N, 0 ... 1.12 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- Pull and pressure force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-2550

Due to its compact design, the PCE-2550 hardness tester is very easy to use for incoming and outgoing inspections. Due to the adjustable hardness scales, the hardness tester PCE-2550 is versatile.

- Measurement according to Leeb Rebound method
- Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
- Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
- Accuracy: ± 0.4%, Repeatability: ± 0.6%
- Impact Device: Type D
- Measuring Direction: 360°
- Internal measured value memory

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-2550

Due to its compact design, the PCE-2550 material tester is very easy to use for incoming and outgoing inspections. Due to the adjustable hardness scales, the material tester PCE-2550 is versatile.

- Measurement according to Leeb Rebound method
- Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
- Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
- Accuracy: ± 0.4%, Repeatability: ± 0.6%
- Impact Device: Type D
- Measuring Direction: 360°
- Internal measured value memory

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-2550

Due to its compact design, the PCE-2550 metal hardness tester is very easy to use for incoming and outgoing inspections. Due to the adjustable hardness scales, the metal hardness tester PCE-2550 is versatile.

- Measurement according to Leeb Rebound method
- Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
- Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
- Accuracy: ± 0.4%, Repeatability: ± 0.6%
- Impact Device: Type D
- Measuring Direction: 360°
- Internal measured value memory

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: FME

FME is a handheld multifunction moisture meter for accurate measurement of the moisture content of paper, wood and building materials. The moisture meter features preset characteristic curves for material-specific moisture measurement. To detect moisture, the moisture meter requires external sensors (sold separately - see accessories) that can either be inserted into a material or placed on a material's surface, allowing for either destructive or non-destructive measurement.


- Measuring range: 5-99% for wood / 0-99% for building materials
- Resolution: 0.1%
- Accuracy: ±0.2%

Manufacturer: Brookhuis Applied Technologies B.V.
Test Instruments manufacturer
Order no.: FME

FME is a handheld paper moisture meter for accurate measurement of the moisture content of paper, wood and building materials. The moisture meter features preset characteristic curves for material-specific moisture measurement. To detect moisture, the moisture meter requires external sensors (sold separately - see accessories) that can either be inserted into a material or placed on a material's surface, allowing for either destructive or non-destructive measurement.


- Measuring range: 5-99% for wood / 0-99% for building materials
- Resolution: 0.1%
- Accuracy: ±0.2%

Manufacturer: Brookhuis Applied Technologies B.V.
Test Instruments manufacturer
Order no.: PCE ISFET MicroFET
- Measuring range: 0.00 ... 14.00 pH
- liquids (low viscosity)
- Normal beakers and containers
- deep containers up to 140 mm / 5.5 in
- very small sample volumes (drops of 20 μl)
- very narrow test tubes (> = Ø3 mm)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LOC 20
The process calibrator PCE-LOC 20 can be used to directly simulate process currents in current loop, mV and mA. This allows the process calibrator to be used to set process displays, data loggers, paperless recorders, etc.

- Simultaneous simulation and measurement mode
- For mA, mV and V
- Graphic display
- Supply of sensors possible
- Manual mode & ramp function
- Continuity test
- Data logger function
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-2550

Due to its compact design, the PCE-2550 surface tester is very easy to use for incoming and outgoing inspections. Due to the adjustable hardness scales, the surface tester PCE-2550 is versatile.

- Measurement according to Leeb Rebound method
- Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
- Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
- Accuracy: ± 0.4%, Repeatability: ± 0.6%
- Impact Device: Type D
- Measuring Direction: 360°
- Internal measured value memory

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: FME

FME is a handheld timber moisture meter for accurate measurement of the moisture content of paper, wood and building materials. The moisture meter features preset characteristic curves for material-specific moisture measurement. To detect moisture, the moisture meter requires external sensors (sold separately - see accessories) that can either be inserted into a material or placed on a material's surface, allowing for either destructive or non-destructive measurement.


- Measuring range: 5-99% for wood / 0-99% for building materials
- Resolution: 0.1%
- Accuracy: ±0.2%

Manufacturer: Brookhuis Applied Technologies B.V.
Test Instruments manufacturer
Order no.: PCE-LOC 20
The voltage calibrator PCE-LOC 20 can be used to directly simulate process currents in current loop, mV and mA. This allows the voltage calibrator to be used to set process displays, data loggers, paperless recorders, etc. The voltage calibrator PCE-LOC 20 can be purchased here in our online shop.

- Simultaneous simulation and measurement mode
- For mA, mV and V
- Graphic display
- Supply of sensors possible
- Manual mode & ramp function
- Continuity test
- Data logger function
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: FME

FME is a handheld wood moisture meter for accurate measurement of the moisture content of paper, wood and building materials. The moisture meter features preset characteristic curves for material-specific moisture measurement. To detect moisture, the moisture meter requires external sensors (sold separately - see accessories) that can either be inserted into a material or placed on a material's surface, allowing for either destructive or non-destructive measurement.


- Measuring range: 5-99% for wood / 0-99% for building materials
- Resolution: 0.1%
- Accuracy: ±0.2%

Manufacturer: Brookhuis Applied Technologies B.V.
Test Instruments manufacturer
Order no.: Xgard-1-O2

The Xgard-1-O2 is a single-gas gas sensor used to warn for gases (Oxygen, O2, 0 ... 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Oxygen, O2, 0 ... 25 vol%)
- Additional display and alarm station
- ATEX or UL approval

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: Xgard-1-O2

The Xgard-1-O2 is a single-gas Gassensor used to warn for gases (Oxygen, O2, 0 ... 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Oxygen, O2, 0 ... 25 vol%)
- Additional display and alarm station
- ATEX or UL approval

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: PCE-009-ICA

Air flow meter to measure air temperature and velocity with calculation of volume of air current and RS-232. This kind of air flow meter is mainly for use in HVAC systems. The logging instruments are manufacturer calibrated and are delivered incl. ISO calibration certificate.


- Measurement range: 0.2 ... 20.0 m/s
- Measurement range: 0.0 ... 50.0 °C / 32 ... 122°F (sensor)
- Volumetric flow:  0 ... 36,000 m3/min
- Internal memory: 16,000 values
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer