The PCE-DDM 3WI Force Gauge is the ideal tool for measuring strong tensile forces. The PCE-DDM 3WI Force Gauge is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

- Measurement range: 3,000 kg / 30 kN / 6,614 lbs
- Resolution: 1 kg / 10 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied without remote control / indicator

 

The PCE-DDM 3WI Hanging Scales are the ideal tool for weighing big loads and for measuring strong tensile forces. The hanging scales are delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

- Measurement range: 3,000 kg / 30 kN / 6,614 lbs
- Resolution: 1 kg / 10 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied without remote control / indicator

The Tension Load Cell PCE-DDM 3WI is the ideal tool for measuring strong tensile forces. The Tension Load Cell PCE-DDM 3WI is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

- Measurement range: 3,000 kg / 30 kN / 6,614 lbs
- Resolution: 1 kg / 10 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied without remote control / indicator

 

 

The Xgard-IR-1 is a single-gas Gas Leak Detector used to warn for gases (Carbon Dioxide, CO₂, 0 ... 5 %), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Carbon Dioxide, CO₂, 0 ... 5 %)
- Additional display and alarm station
- ATEX or UL approval

The Air Quality Meter Gasman-NO2 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Air Quality Meter warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Air Quality Meter fulfills all the European and international norms, even ATEX and UL standards.

- Non-rechargeable, 1-year battery
- For NO₂ (Nitrogen Dioxide)
- Dust and water resistant - IP 65/67
- 0 ... 10 ppm

 

The Gas Leak Detector Gasman-NO2 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Leak Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Leak Detector fulfills all the European and international norms, even ATEX and UL standards.

- Non-rechargeable, 1-year battery
- For NO₂ (Nitrogen Dioxide)
- Dust and water resistant - IP 65/67
- 0 ... 10 ppm

 

The Air Quality Meter Gasman-CL₂ is a unique gas meter which protects against a specific gas, inflammable or toxic. The Air Quality Meter warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Air Quality Meter fulfills all the European and international norms, even ATEX and UL standards.

• Non-rechargeable, 1-year battery
• For CL₂ (Chlorine)
• Dust and water resistant - IP 65/67
• 0 ... 5 ppm

The Gas Leak Detector Gasman-CL2is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Leak Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Leak Detector fulfills all the European and international norms, even ATEX and UL standards.

- Non-rechargeable, 1-year battery
- For CL₂ (Chlorine)
- Dust and water resistant - IP 65/67
- 0 ... 5 ppm

 

The geiger counter PM1208M combines a geiger counter for gamma rays with the design and functionality of a modern wrist watch and was designed for the continuous monitoring of the environmental radiation level. The degree of radiation is shown on the display of the geiger counter as dose equivalent and dose equivalent rate. If the specified threshold levels are exceeded, the geiger counter gives out an acoustic signal.

- Gamma ray detector and time keeper
- Dose equivalent range: 0.001 - 9999.99 mSv
- Dose equivalent rate range: 0.01 - 9999.99 µSv/h
- Energy range: 0.06 - 1.5 MeV
- Internal memory for up to 500 measurements

 

The radiation detector PM1208M combines a geiger counter for gamma rays with the design and functionality of a modern wrist watch and was designed for the continuous monitoring of the environmental radiation level. The degree of radiation is shown on the display of the radiation detector as dose equivalent and dose equivalent rate. If the specified threshold levels are exceeded, the radiation detector gives out an acoustic signal.

- Gamma ray detector and time keeper
- Dose equivalent range: 0.001 - 9999.99 mSv
- Dose equivalent rate range: 0.01 - 9999.99 µSv/h
- Energy range: 0.06 - 1.5 MeV
- Internal memory for up to 500 measurements

 

The radiation meter PM1208M combines a geiger counter for gamma rays with the design and functionality of a modern wrist watch and was designed for the continuous monitoring of the environmental radiation level. The degree of radiation is shown on the display of the radiation meter as dose equivalent and dose equivalent rate. If the specified threshold levels are exceeded, the radiation meter gives out an acoustic signal.

- Gamma ray detector and time keeper
- Dose equivalent range: 0.001 - 9999.99 mSv
- Dose equivalent rate range: 0.01 - 9999.99 µSv/h
- Energy range: 0.06 - 1.5 MeV
- Internal memory for up to 500 measurements

 

The radioactivity meter PM1208M combines a geiger counter for gamma rays with the design and functionality of a modern wrist watch and was designed for the continuous monitoring of the environmental radiation level. The degree of radiation is shown on the display of the radioactivity meter as dose equivalent and dose equivalent rate. If the specified threshold levels are exceeded, the radioactivity meter gives out an acoustic signal.

- Gamma ray detector and time keeper
- Dose equivalent range: 0.001 - 9999.99 mSv
- Dose equivalent rate range: 0.01 - 9999.99 µSv/h
- Energy range: 0.06 - 1.5 MeV
- Internal memory for up to 500 measurements

 

- Measurable particle sizes: PM2.5 / PM10
- Measuring range Mass concentration: 0 ... 2000 μg / m³
- Measurable particle sizes: 0.3, 2.5 and 10 μm
- Display with graphic real-time diagram
- Data memory up to 5000 data sets

- Measurable particle sizes: PM2.5 / PM10
- Measuring range Mass concentration: 0 ... 2000 μg / m³
- Measurable particle sizes: 0.3, 2.5 and 10 μm
- Display with graphic real-time diagram
- Data memory up to 5000 data sets

- Measurable particle sizes: PM2.5 / PM10
- Measuring range Mass concentration: 0 ... 2000 μg / m³
- Measurable particle sizes: 0.3, 2.5 and 10 μm
- Display with graphic real-time diagram
- Data memory up to 5000 data sets

- Measurable particle sizes: PM2.5 / PM10
- Measuring range Mass concentration: 0 ... 2000 μg / m³
- Measurable particle sizes: 0.3, 2.5 and 10 μm
- Display with graphic real-time diagram
- Data memory up to 5000 data sets

PCE-RVI 1 is an analogue viscometer or dial reading viscometer used in industrial and research applications to measure the viscosity of fluids such as paints, lacquers, inks, pastes, adhesives, plastics, greases and liquid food products. Under identical conditions, test results from an analogue viscometer are as accurate and reproducible as results from a digital viscometer. Thus, the PCE-RVI 1 analogue viscometer offers an affordable solution for viscosity measurement during product and material testing, development, production and quality control.

- Rotational speed: 6, 12, 30, and 60 rpm
- Viscosity range: 10 ... 100,000 mPa.s / cP
- Accuracy: ±5 % full scale (FS) in Newtonian fluids

PCE-VE 320HR is an automotive tester, borescope, inspection camera or endoscope for the non-destructive inspection (NDI) of engines, machines and more. This industrial borescope is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head features 6 LED lights (4 front, 2 side) for better illumination. In addition, digital image magnification or zoom of up to 2 times is available, plus boost function for improved image quality in the dark.

 

- Diameter camera head: Ø 5.5mm / 0.22"
- Cable length: 1 m / 3ft 3"
- With boost function: better images in dark surroundings
- 2 additional side LEDs for better lighting
- Image rotation possible
- Interface: Mini-USB 1.1 und AV out
- Memory: 8 GB SD memory card (incl.)

- Measurable particle sizes: PM2.5 / PM10
- Measuring range Mass concentration: 0 ... 2000 μg / m³
- Measurable particle sizes: 0.3, 2.5 and 10 μm
- Display with graphic real-time diagram
- Data memory up to 5000 data sets

- Measurable particle sizes: PM2.5 / PM10
- Measuring range Mass concentration: 0 ... 2000 μg / m³
- Measurable particle sizes: 0.3, 2.5 and 10 μm
- Display with graphic real-time diagram
- Data memory up to 5000 data sets