The main advantage of a steady-state stroboscope RT STROBE 7000 LED with intelligent LED-technology results from the absence of a short life xenon-tube. The STROBE 7000 LED is able to flash up to 120,000 flashed per minute at 9000 LUX with its 200 LEDs.

- Frequency range: 0 ... 120,000 FPM (flashes per minute)
- Large area illumination 300 x 500 mm
- Adjustable illuminance: as standard, with rotary knob, from 30 - 100%
- High light intensity
- 9000 LUX at 30 cm

The stainless steel counting scale is made entirely of high quality, acid resistant stainless steel. The weighing cells installed in the stainless steel counting scale have a protection class of IP68.

- Weighing range : 300 kg
- Readability : 0.1 kg
- Taring range: over the entire weighing range
- Includes initial verification
- Calibratable M III

The stainless steel floor scale is made entirely of high quality, acid resistant stainless steel. The weighing cells installed in the stainless steel floor scale have a protection class of IP68.

- Weighing range : 300 kg
- Readability : 0.1 kg
- Taring range: over the entire weighing range
- Includes initial verification
- Calibratable M III

The stainless steel industrial scale is made entirely of high quality, acid resistant stainless steel. The weighing cells installed in the stainless steel industrial scale have a protection class of IP68.

- Weighing range : 300 kg
- Readability : 0.1 kg
- Taring range: over the entire weighing range
- Includes initial verification
- Calibratable M III

The legal for trade balance is made entirely of high quality, acid resistant stainless steel. The weighing cells installed in the legal for trade balance have a protection class of IP68.

- Weighing range : 300 kg
- Readability : 0.1 kg
- Taring range: over the entire weighing range
- Includes initial verification
- Calibratable M III

The stainless steel pallet scale is made entirely of high quality, acid resistant stainless steel. The weighing cells installed in the stainless steel pallet scale have a protection class of IP68.

- Weighing range : 300 kg
- Readability : 0.1 kg
- Taring range: over the entire weighing range
- Includes initial verification
- Calibratable M III

The stainless steel parcel scale is made entirely of high quality, acid resistant stainless steel. The weighing cells installed in the stainless steel parcel scale have a protection class of IP68.

- Weighing range : 300 kg
- Readability : 0.1 kg
- Taring range: over the entire weighing range
- Includes initial verification
- Calibratable M III

The stainless steel platform scale is made entirely of high quality, acid resistant stainless steel. The weighing cells installed in the stainless steel platform scale have a protection class of IP68.

- Weighing range : 300 kg
- Readability : 0.1 kg
- Taring range: over the entire weighing range
- Includes initial verification
- Calibratable M III

The stainless steel weighbridge is made entirely of high quality, acid resistant stainless steel. The weighing cells installed in the stainless steel weighbridge have a protection class of IP68.

- Weighing range : 300 kg
- Readability : 0.1 kg
- Taring range: over the entire weighing range
- Includes initial verification
- Calibratable M III

The PCE-830 Power Analyzer is used for measuring one to three phases of electrical quantities for alternating current (AC). This Power Analyzer also measures such parameters as voltage, current, frequency, harmonics and power as well as indicting, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.

- PCE-830 + PCE-6802 amp clamp (1000 A)
- Electrical conductor pick-up: 55 mm / 2.2 in diameter
- Range selection: manual (10 A, 100 A, 1000 A)
- Clamp dimensions: 244 x 97 x 46 mm / 9.6 x 3.8 x 1.8 in
- Incl. ISO calibration certificate

The PCE-830 Power Data Logger is used for measuring one to three phases of electrical quantities for alternating current (AC). This Power Data Logger also measures such parameters as voltage, current, frequency, harmonics and power as well as indicting, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.

- PCE-830 + PCE-6802 amp clamp (1000 A)
- Electrical conductor pick-up: 55 mm diameter / 2.2 in
- Range selection: manual (10 A, 100 A, 1000 A)
- Clamp dimensions: 244 x 97 x 46 mm / 9.6 x 3.8 x 1.8 in
- Incl. ISO calibration certificate

The easy-to-use PCE-PA 8300 Clamp Meter is the ideal tool for performing power and harmonics analysis as well as for measuring network capacity. The PCE-PA 8300 is a 3-phase power analyzer that features:

- Voltage measurement range of 10 V ... 600 V AC
- Current measurement range of (Set 1) 20 A ... 1200 A AC or (Set 2) 30 A ... 3000 A AC
- Performance measurement range of 0 kW ... 9.999 MW (VA/VAR)
- Simultaneous display of harmonics and waveform
- Graphic Phasor diagram
- Captures transients including dip, swell, and outage

The easy-to-use PCE-PA 8300 Clamp-On Tester is the ideal tool for performing power and harmonics analysis as well as for measuring network capacity. The PCE-PA 8300 is a 3-phase power analyzer that features:

- Voltage measurement range of 10 V ... 600 V AC
- Current measurement range of (Set 1) 20 A ... 1200 A AC or (Set 2) 30 A ... 3000 A AC
- Performance measurement range of 0 kW ... 9.999 MW (VA/VAR)
- Simultaneous display of harmonics and waveform
- Graphic Phasor diagram
- Captures transients including dip, swell, and outage

The easy-to-use PCE-PA 8300 Electrical Tester is the ideal tool for performing power and harmonics analysis as well as for measuring network capacity. The PCE-PA 8300 is a 3-phase power analyzer that features:

- Voltage measurement range of 10 V ... 600 V AC
- Current measurement range of (Set 1) 20 A ... 1200 A AC or (Set 2) 30 A ... 3000 A AC
- Performance measurement range of 0 kW ... 9.999 MW (VA/VAR)
- Simultaneous display of harmonics and waveform
- Graphic Phasor diagram
- Captures transients including dip, swell, and outage

The floor scale PCE-SD..B SST is a verifiable weighing balance that is intended for flexible use. Due to the flexibly movable weighing beam (4 m), the floor scale is well suited for weighing large objects, and non-standard pallet sizes can also be weighed quickly and conveniently.

- Weighing range : 3000 kg
- Readability: 1 kg
- Calibration value: 1 kg
- Verifiable M III

The easy-to-use PCE-PA 8300 HVAC Meter is the ideal tool for performing power and harmonics analysis as well as for measuring network capacity. The PCE-PA 8300 is a 3-phase power analyzer that features:

- Voltage measurement range of 10 V ... 600 V AC
- Current measurement range of (Set 1) 20 A ... 1200 A AC or (Set 2) 30 A ... 3000 A AC
- Performance measurement range of 0 kW ... 9.999 MW (VA/VAR)
- Simultaneous display of harmonics and waveform
- Graphic Phasor diagram
- Captures transients including dip, swell, and outage

The two-way optics is a great advantage of the PCE-VE 1014N-F industrial borescope. There is easy control of the camera head with the PCE-VE 1034N-F industrial borescope. The PCE-VE 1034N-F industrial borescope allows you to capture images and videos, and the videos are also stored with an audio recording. 

- Cable length: 1.5 m / 4.9 ft
- Head: 2-way
- Diameter: 4.5 mm / 0.18 in
- Resolution: 640 x 480 Pixel
- Storage of pictures and videos
- 8 GB memory card incl.
- LED lighting