PCE-CL 10 is a pipe locator that uses the conductive method to detect metal pipes or pipe tracer wires. With PCE-CL 10, you also can locate power cables, lines, circuits, short circuits and ground points, as well as test protective tubing and coaxial cables. To perform these functions, it is not necessary to disconnect the power. Location can be identified in floors, ceilings, walls and the ground, even behind concrete and brick.

- Operating temperature / humidity: 0 ... +40 ºC or +32 ... +104 ºF / max. 80% rh
- Storing temperature / humidity: -20 ... +60 ºC or -4 ... +140 ºF/ max. 80% rh
- Max. Voltage: 400 VAC (0 - 60 Hz) / 400 V DC

 

PCE-T236 is a digital handheld tachometer or rotation test instrument for both contact and non-contact measurement. This tachometer measures rotation speed as well as linear or surface speed, displaying units in rpm, m/min or ft/min. A unique feature of this tachometer is that the orientation of the 5-digit LCD screen automatically rotates 180° to accommodate either contact or non-contact measurement.

- Optical laser measurement range: 5 ... 99999 rpm
- Contact measurement range: 0.05 ... 19999 rpm
- Accuracy: Less than 60000 rpm = ±0.05% fs , Greater than 60000 rpm = ±0.15% fs
- Incl. ISO calibration certificate

The class 2 (type 2) sound level meter SLT-TRM is a noise meter, sound pressure level (SPL), or decibel (dB) meter with an audible or visual alarm. Used for long-term measurement of occupational noise exposure limits, the sound level meter SLT-TRM is an effective device across the industry spectrum. 

- Class 2
- Measuring range: 30 ... 130 dB in 3 ranges
- Resolution: 0.1 dB
- Accuracy: ±1.5 dB
- Frequency weighting: A
- Time weighting: Fast
- Output: 4 ... 20 mA
- IP 54 ingress protection rating on transmitter

The Sound Level Meter consists of a measuring microphone with a handle and a wall bracket on a 1.5 m (4.9 ft) cable, a sound transmitter. The main area of ​​application of the transducer is in the continuous sound measurement and sound monitoring of factory halls, production rooms and at large events (discos, folk festivals, kart tracks ...).

- Measuring range: 30 ... 130 dB in three ranges
- Power supply: 24 V DC
- Resolution: 0.1 dB
- Analog output signal 4 ... 20 mA

With this Surface Thickness Measuring Device, layer thicknesses on metallic surfaces can be reliably determined. The Surface Thickness Measuring Device has a measuring range of 1500 µm. This means that the Surface Thickness Measuring Device is used, for example, in a paint shop, for incoming goods inspection or for an expert.
- Measuring range up to 1500 µm
- Measurable substrates: Fe
- Probe: external
- Micro USB and Bluetooth interface
- Data storage for up to 600 measured values

PCE-CL 10 is a wire tracer that uses the conductive method to detect metal pipes or pipe tracer wires. With PCE-CL 10, you also can locate power cables, lines, circuits, short circuits and ground points, as well as test protective tubing and coaxial cables. To perform these functions, it is not necessary to disconnect the power. Location can be identified in floors, ceilings, walls and the ground, even behind concrete and brick.

- Operating temperature / humidity: 0 ... +40 ºC or +32 ... +104 ºF / max. 80% rh
- Storing temperature / humidity: -20 ... +60 ºC or -4 ... +140 ºF/ max. 80% rh
- Max. Voltage: 400 VAC (0 - 60 Hz) / 400 V DC

 

Base model. The Geiger Counter Radex RD1503 is able to measure gamma radiation. The radiation Analyzer is highly sophisticated, reliable and not expensive. A lot of functions are integrated into the radiation measurement device.

- Dose Rate: 0.05 ... 999 Sv / h
- Exposure dose rate: 5 ... 999 μRem / h
- Gamma-ray energy: 0.1 ... 1.25 MeV
- Limit: 0.1 ... 99.0 Sv / h
- Calculation time: 40 ± 0.5 seconds

 

The radioactivity meter Radex RD1503 is able to measure gamma radiation.

- Dose Rate: 0.05 ... 999 Sv / h
- Exposure dose rate: 5 ... 999 μRem / h
- Gamma-ray energy: 0.1 ... 1.25 MeV
- Limit: 0.1 ... 99.0 Sv / h
- Calculation time: 40 ± 0.5 seconds

 

The P-700 Contact Resistance Thermometer is the ideal device for highly accurate measurements with real-time information. The P-700 Contact Resistance Thermometer measures within a range from -200 to 850° / -328 ... 1562°F (Pt100 sensors) and thermo-elements to 1760°C / 3200°F with a resolution of 0.1°C / 0.18°F along the entire range.

- Thermometer for PT-100 and thermocouples
- Range Pt-100: -200 ... 850°C / -328 ... 1562°F
- Accuracy: ± 0.1°C / 0.18°F of -100 ... 200°C / -148 ... 392°F, otherwise 0.1%
- Sensor must be ordered separately

The P-700 Resistance Digital Thermometer is the ideal device for highly accurate measurements with real-time information. The P-700 Resistance Digital Thermometer measures within a range from -200 to 850° / -328 ... 1562°F (Pt100 sensors) and thermo-elements to 1760°C / 3200°F with a resolution of 0.1°C / 0.18°F along the entire range.

- Thermometer for PT-100 and thermocouples
- Range Pt-100: -200 ... 850°C / -328 ... 1562°F
- Accuracy: ± 0.1°C / 0.18°F of -100 ... 200°C / -148 ... 392°F, otherwise 0.1%
- Sensor must be ordered separately

The flat miniature force sensor has a height of only 11 mm. With a diameter of 20 mm, this miniature force sensor is very compact. This force sensor achieves a measurement uncertainty of only 0.5%. 

 

- Rated load / force F.S.: 5-2000 kg / 50 N - 20 kN
- Limit load / force: 120 %
- Breaking load / force: 150 %
- Rated output: 1.0 – 1.5 mV/V

- Force sensor nominal load selectable!

The P-700 Probe Thermometer is the ideal device for highly accurate measurements with real-time information. The P-700 Probe Thermometer measures within a range from -200 to 850° / -328 ... 1562°F (Pt100 sensors) and thermo-elements to 1760°C / 3200°F with a resolution of 0.1°C / 0.18°F along the entire range.

- Thermometer for PT-100 and thermocouples
- Range Pt-100: -200 ... 850°C / -328 ... 1562°F
- Accuracy: ± 0.1°C / 0.18°F of -100 ... 200°C / -148 ... 392°F, otherwise 0.1%
- Sensor must be ordered separately

The P-700 Contact Resistance Temperature Meter is the ideal device for highly accurate measurements with real-time information. The P-700 Contact Resistance Temperature Meter measures within a range from -200 to 850° / -328 ... 1562°F (Pt100 sensors) and thermo-elements to 1760°C / 3200°F with a resolution of 0.1°C / 0.18°F along the entire range.

- Thermometer for PT-100 and thermocouples
- Range Pt-100: -200 ... 850°C / -328 ... 1562°F
- Accuracy: ± 0.1°C / 0.18°F of -100 ... 200°C / -148 ... 392°F, otherwise 0.1%
- Sensor must be ordered separately

The P-700 Contact Resistance Thermometer is the ideal device for highly accurate measurements with real-time information. The P-700 Contact Resistance Thermometer measures within a range from -200 to 850° / -328 ... 1562°F (Pt100 sensors) and thermo-elements to 1760°C / 3200°F with a resolution of 0.1°C / 0.18°F along the entire range.

- Thermometer for PT-100 and thermocouples
- Range Pt-100: -200 ... 850°C / -328 ... 1562°F
- Accuracy: ± 0.1°C / 0.18°F of -100 ... 200°C / -148 ... 392°F, otherwise 0.1%
- Sensor must be ordered separately

The PCE-VT 1100 Accelerometer is designed for quick measurements of an imbalance in machines and the examination of bearings and gears. The Accelerometer is also frequently used to evaluate the state of small electronic motors. Meter can only be used for realtime measurement, no memory storage.

- Vibration Acceleration: 0.01 ... 199.9 m/s2 (peak value)
- Vibration Speed: 0.01 ... 199.9 mm/s (effective)
- Vibration Displacement:  0.001 ... 1.999 mm (peak-peak)
- Accuracy: ±5%, ±2 Digits (20 Hz ... 1 KHz) / ±10%, ±2 Digits (10 Hz ... 20 Hz)
- Frequency: Accel. and Vel. 10 Hz ... 1 kHz, Displacement 10 Hz ... 500 Hz 
- Frequency range: 10 Hz ... 1 kHz 
- Needle probes: 10mm / 0.39" // 45mm / 1.77"

The PCE-VT 1100S accelerometer is suitable for relative measurements on various machines. With the 45 mm long needle probe, you can access hard-to-reach places in machines and motors. For this reason, this accelerometer is used for rapid measurement of imbalance and for checking bearing and gear conditions.

- Frequency range: 10 Hz ... 1 kHz
- Measures speed, distance, acceleration in metric units
- Holds the reading after each measurement
- Portable and battery operated
- Needle probe: 45mm / 1.77"

PCE-313A is a combination thermometer hygrometer used to measure the relative humidity (% RH) and temperature (°C / °F) of the air. Ideal for use in evaluating heating, ventilation and air conditioning (HVAC) system performance, this digital temperature and air humidity meter also has a port for connecting a type-K thermocouple.

- Relative humidity: 5 ... 95% r.H.
- Temperature: 0 ... 50°C / 32 ... 122°F
- Type K: -50 ... 1300°C / -58 ... 2372°F
- Calculated dew point: -25.3 ... 48.9°C / -13.5 ... 120°F
- Wet bulb temperature: -21 ... 50°C / -5.8 ... 122°F
- Memory: SD card (1 ... 16 GB)

 

- Measuring range: 0 ... 1500 μm
- Resolution: 0.1 μm (at <100 μm)
- Accuracy: ± 3% + 1 μm (at> 150 μm)
- Alarm when limit value exceeded
- Graphical representation of the measured values

- Measurable electrical parameters: AC V, AC A, resistance
- Clamp diameter: 30 mm
- Operating temperature: -10 ... 50°C / 50 ... 122°F
- Current consumption: 10-mA
- Incl. ISO calibration certificate

- Measurable electrical parameters: AC V, AC A, resistance
- Clamp diameter: 30 mm
- Operating temperature: -10 ... 50°C / 50 ... 122°F
- Current consumption: 10-mA
- Incl. ISO calibration certificate