Order no.: PCE-780-ICA

The pyrometer PCE-780A is a dual-function instrument used to measure both temperature and humidity. The dew point, which is calculated by the PCE-780, is displayed on the high-contrast LCD display. The control buttons can be used to set alarm values. If the surface temperatures are exceeded or undercut, the PCE-780 emits a warning tone and displays either a LOW or a HIGH alarm.

- Infrared measurement range: -76 ... 932°F / -60 ... 500°C
- Infrared temperature measurement
- Air temperature and humidity measurement
- Calculation of dew point
- High contrast LCD display
- Adjustable high and low alarm
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-780-ICA

The thermometer PCE-780A is a dual-function instrument used to measure both temperature and humidity. The dew point, which is calculated by the PCE-780, is displayed on the high-contrast LCD display. The control buttons can be used to set alarm values. If the surface temperatures are exceeded or undercut, the PCE-780 emits a warning tone and displays either a LOW or a HIGH alarm.

- Infrared measurement range: -76 ... 932°F / -60 ... 500°C
- Infrared temperature measurement
- Air temperature and humidity measurement
- Calculation of dew point
- High contrast LCD display
- Adjustable high and low alarm
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: 22029L
Sewer leak test set

Bladder seal for pipe diameter 75 ... 150 mm
Test Instruments manufacturer
Order no.: PCE-228-Kit

The PCE-228-Kit includes a multifunctional pH meter complete with a PE-03 electrode, temperature sensor, SD memory card, batteries, user manual, calibration solution and protective carrying case. The included PCE-288 pH meter is a handy device for measuring pH, mV and temperature. Measurement values are stored onto an SD card or transferred to a computer through the RS-232 interface.


Measurement range:
- pH: 0.00 to 14.00 pH
- Temperature: 0.0 ... 65.0 °C or 32 ... 149 °F (via the temperature sensor)
- Redox: -1999 to 0 to 1999 mV

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-228-Kit

The PCE-228-Kit includes a multifunctional water analysis meter complete with a PE-03 pH electrode, temperature sensor, SD memory card, batteries, user manual, calibration solution and protective carrying case. The included PCE-288 water analysis meter is an easy-to-use handheld device for measuring pH, mV and °C. With the PCE-228 water analysis meter, both temperature and pH values can be directly stored onto an SD card in Excel format, or transferred to a PC through the RS-232 interface.


Measurement range:
- pH: 0.00 to 14.00 pH
- Temperature: 0.0 ... 65.0 °C or 32 ... 149 °F (via the temperature sensor)
- Redox: -1999 to 0 to 1999 mV

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 21BT

With this Automotive Tester, layer thicknesses on metallic surfaces can be reliably determined. The Automotive Tester has a measuring range of 1500 µm. This means that the Automotive Tester is used, for example, in a paint shop, for incoming goods inspection or for an expert.
- Measuring range up to 1500 µm
- Measurable substrates: Fe
- Probe: external
- Micro USB and Bluetooth interface
- Data storage for up to 600 measured values

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CL 10

PCE-CL 10 is a cable detector that uses the conductive method to detect metal pipes or pipe tracer wires. With PCE-CL 10, you also can locate power cables, lines, circuits, short circuits and ground points, as well as test protective tubing and coaxial cables. To perform these functions, it is not necessary to disconnect the power. Location can be identified in floors, ceilings, walls and the ground, even behind concrete and brick.


- Operating temperature / humidity: 0 ... +40 ºC or
  +32 ... +104 ºF / max. 80% rh
- Storing temperature / humidity: -20 ... +60 ºC or
  -4 ... +140 ºF/ max. 80% rh
- Max. Voltage: 400 VAC (0 - 60 Hz) / 400 V DC

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CL 10

PCE-CL 10 is a cable fault meter that uses the conductive method to detect metal pipes or pipe tracer wires. With PCE-CL 10, you also can locate power cables, lines, circuits, short circuits and ground points, as well as test protective tubing and coaxial cables. To perform these functions, it is not necessary to disconnect the power. Location can be identified in floors, ceilings, walls and the ground, even behind concrete and brick.


- Operating temperature / humidity: 0 ... +40 ºC or
  +32 ... +104 ºF / max. 80% rh
- Storing temperature / humidity: -20 ... +60 ºC or
  -4 ... +140 ºF/ max. 80% rh
- Max. Voltage: 400 VAC (0 - 60 Hz) / 400 V DC

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CL 10

PCE-CL 10 is a cable locator that uses the conductive method to detect metal pipes or pipe tracer wires. With PCE-CL 10, you also can locate power cables, lines, circuits, short circuits and ground points, as well as test protective tubing and coaxial cables. To perform these functions, it is not necessary to disconnect the power. Location can be identified in floors, ceilings, walls and the ground, even behind concrete and brick.


- Operating temperature / humidity: 0 ... +40 ºC or
  +32 ... +104 ºF / max. 80% rh
- Storing temperature / humidity: -20 ... +60 ºC or
  -4 ... +140 ºF/ max. 80% rh
- Max. Voltage: 400 VAC (0 - 60 Hz) / 400 V DC

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 21BT
With this Coating Thickness Gauge, layer thicknesses on metallic surfaces can be reliably determined. The Coating Thickness Gauge has a measuring range of 1500 µm. This means that the Coating Thickness Gauge is used, for example, in a paint shop, for incoming goods inspection or for an expert.
- Measuring range up to 1500 µm
- Measurable substrates: Fe
- Probe: external
- Micro USB and Bluetooth interface
- Data storage for up to 600 measured values
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 21BT
With this Coating Thickness Measuring Device, layer thicknesses on metallic surfaces can be reliably determined. The Coating Thickness Measuring Device has a measuring range of 1500 µm. This means that the Coating Thickness Measuring Device is used, for example, in a paint shop, for incoming goods inspection or for an expert.
- Measuring range up to 1500 µm
- Measurable substrates: Fe
- Probe: external
- Micro USB and Bluetooth interface
- Data storage for up to 600 measured values
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 21BT
With this Coating Thickness Meter, layer thicknesses on metallic surfaces can be reliably determined. The Coating Thickness Meter has a measuring range of 1500 µm. This means that the Coating Thickness Meter is used, for example, in a paint shop, for incoming goods inspection or for an expert.
- Measuring range up to 1500 µm
- Measurable substrates: Fe
- Probe: external
- Micro USB and Bluetooth interface
- Data storage for up to 600 measured values
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-T236-ICA

PCE-T236 is a digital handheld tachometer or rotation meter for both contact and non-contact measurement. This condition monitoring tachometer measures rotation speed as well as linear or surface speed, displaying units in rpm, m/min or ft/min. A unique feature of this tachometer is that the orientation of the 5-digit LCD screen automatically rotates 180° to accommodate either contact or non-contact measurement.


- Optical laser measurement range: 5 ... 99999 rpm
- Contact measurement range: 0.05 ... 19999 rpm
- Accuracy: Less than 60000 rpm = ±0.05% fs , Greater than 60000 rpm = ±0.15% fs
- Incl. ISO calibration certificate

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: SLT-TRM

SLT-TRM is a class II (type 2) sound level, sound pressure level (SPL), decibel (dB) or noise meter with audible or visual alarm output capability. SLT-TRM is used for long-term, continuous monitoring of occupational noise exposure limits in industrial environments. AC powered.


- Measuring range: 30 ... 130 dB in 3 ranges
- Resolution: 0.1 dB
- Accuracy: ± 1.5 dB
- IP 54 ingress protection rating on transmitter

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: SLT-TRM-24V

The Decibel Meter consists of a measuring microphone with a handle and a wall bracket on a 1.5 m (4.9 ft) cable, a sound transmitter. The main area of ​​application of the transducer is in the continuous sound measurement and sound monitoring of factory halls, production rooms and at large events (discos, festivals, kart tracks ...).

- Measuring range: 30 ... 130 dB in three ranges
- Power supply: 24 V DC
- Resolution: 0.1 dB
- Analog output signal 4 ... 20 mA

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-T236-ICA

PCE-T236 is a digital handheld tachometer or rotation meter for both contact and non-contact measurement. This tachometer measures rotation speed as well as linear or surface speed, displaying units in rpm, m/min or ft/min. A unique feature of this tachometer is that the orientation of the 5-digit LCD screen automatically rotates 180° to accommodate either contact or non-contact measurement.


- Optical laser measurement range: 5 ... 99999 rpm
- Contact measurement range: 0.05 ... 19999 rpm
- Accuracy: Less than 60000 rpm = ±0.05% fs, greater than 60000 rpm = ±0.15% fs
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 21BT
With this Material Tester, layer thicknesses on metallic surfaces can be reliably determined. The Material Tester has a measuring range of 1500 µm. This means that the Material Tester is used, for example, in a paint shop, for incoming goods inspection or for an expert.
- Measuring range up to 1500 µm
- Measurable substrates: Fe
- Probe: external
- Micro USB and Bluetooth interface
- Data storage for up to 600 measured values
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: SLT-TRM

SLT-TRM is a class II (type 2) sound meter, sound pressure level (SPL), decibel (dB) or noise meter with audible or visual alarm output capability. SLT-TRM is used for long-term, continuous monitoring of occupational noise exposure limits in industrial environments. AC powered.


- Measuring range: 30 ... 130 dB in 3 ranges
- Resolution: 0.1 dB
- Accuracy: ± 1.5 dB
- IP 54 ingress protection rating on transmitter

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: SLT-TRM-24V

The Noise Meter consists of a measuring microphone with a handle and a wall bracket on a 1.5 m (4.9 ft) cable, a sound transmitter. The main area of ​​application of the transducer is in the continuous sound measurement and sound monitoring of factory halls, production rooms and at large events (discos, folk festivals, kart tracks ...).

- Measuring range: 30 ... 130 dB in three ranges
- Power supply: 24 V DC
- Resolution: 0.1 dB
- Analog output signal 4 ... 20 mA

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 21BT
With this Paint Thickness Gauge, layer thicknesses on metallic surfaces can be reliably determined. The Paint Thickness Gauge has a measuring range of 1500 µm. This means that the Paint Thickness Gauge is used, for example, in a paint shop, for incoming goods inspection or for an expert.
- Measuring range up to 1500 µm
- Measurable substrates: Fe
- Probe: external
- Micro USB and Bluetooth interface
- Data storage for up to 600 measured values
Manufacturer: PCE Instruments
Test Instruments manufacturer