- Cable diameter / head diameter: 23 mm / 0.9 in
- 20 m / 66 ft push cable
- Electronic meter counting
- Battery and mains operation
- Waterproof up to 20 m / 66 ft

The TXgard-Plus-H2S is a single-gas Gas detector used to warn for gases (Hydrogen Sulfide, H₂S, 0 ... 50 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Hydrogen Sulfide, H₂S, 0 ... 50 ppm)
- Additional display and alarm station
- ATEX or UL approval

 

Gas Detector AQ-500 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Detector can be equipped with four different heads that vary in their measurement range.

- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head OZU included in delivery (Ozone 0-0.15 ppm)
- Alarm function
- Data logger

 

Ozone Meter AQ-500 is a highly accurate instrument for measuring ozone concentrations in the air. The Ozone Meter can be equipped with four different heads that vary in their measurement range.

- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head OZU included in delivery (Ozone 0-0.15 ppm)
- Alarm function
- Data logger

 

The multi channel data logger PCE-KD7 can be used as a data logger in measurement and control systems. The application area of ​​this multi channel data logger includes the measurement, visualization, monitoring and storage of process variables in various industrial branches, eg in the pharmaceutical, food or chemical industry. In addition to the analogue standard signals in the form of currents and voltages, this digital multi channel data logger can also process different types of thermocouples and resistance temperature sensors on up to 12 channels. It is also possible to retrieve up to 16 measured values ​​via the digital interfaces Ethernet or RS-485 and also to store them.

 

Note: This item must be configured before ordering!

The paperless recorder PCE-KD7 can be used as a data logger in measurement and control systems. The application area of ​​this paperless recorder includes the measurement, visualization, monitoring and storage of process variables in various industrial branches, eg in the pharmaceutical, food or chemical industry. In addition to the analogue standard signals in the form of currents and voltages, this digital paperless recorder can also process different types of thermocouples and resistance temperature sensors on up to 12 channels. It is also possible to retrieve up to 16 measured values ​​via the digital interfaces Ethernet or RS-485 and also to store them.

 

Note: This item must be configured before ordering!

- Weighing range: 50 g / 0.11 lbs
- Readability: 0.1 mg = 0.0001 g / 0.0001%
- Especially for very dry samples such as ABS / PET etc.
- Drying temperature max. 160°C / 320°F
- Database with drying parameters for eg ABS, Crastin, Aramid...
- Stores the measurement data of the last 5,000 drying cycles
- Automatic chamber opens and closes without contact
- Non-contact control thanks to IR sensors
- Quickly import and export stored data using a USB flash drive

- Weighing range: 50 g / 0.11 lbs
- Readability: 0.1 mg = 0.0001 g / 0.0001%
- Especially for very dry samples such as ABS / PET etc.
- Drying temperature max. 160°C / 320°F
- Database with drying parameters for eg ABS, Crastin, Aramid...
- Stores the measurement data of the last 5,000 drying cycles
- Automatic chamber opens and closes without contact
- Non-contact control thanks to IR sensors
- Quickly import and export stored data using a USB flash drive

- Weighing range: 50 g / 0.11 lbs
- Readability: 0.1 mg = 0.0001 g / 0.0001%
- Especially for very dry samples such as ABS / PET etc.
- Drying temperature max. 160°C / 320°F
- Database with drying parameters for eg ABS, Crastin, Aramid...
- Stores the measurement data of the last 5,000 drying cycles
- Automatic chamber opens and closes without contact
- Non-contact control thanks to IR sensors
- Quickly import and export stored data using a USB flash drive

- Weighing range: 50 g / 0.11 lbs
- Readability: 0.1 mg = 0.0001 g / 0.0001%
- Especially for very dry samples such as ABS / PET etc.
- Drying temperature max. 160°C / 320°F
- Database with drying parameters for eg ABS, Crastin, Aramid...
- Stores the measurement data of the last 5,000 drying cycles
- Automatic chamber opens and closes without contact
- Non-contact control thanks to IR sensors
- Quickly import and export stored data using a USB flash drive

- Weighing range: 50 g / 0.11 lbs
- Readability: 0.1 mg = 0.0001 g / 0.0001%
- Especially for very dry samples such as ABS / PET etc.
- Drying temperature max. 160°C / 320°F
- Database with drying parameters for eg ABS, Crastin, Aramid...
- Stores the measurement data of the last 5,000 drying cycles
- Automatic chamber opens and closes without contact
- Non-contact control thanks to IR sensors
- Quickly import and export stored data using a USB flash drive

- Weighing range: 50 g / 0.11 lbs
- Readability: 0.1 mg = 0.0001 g / 0.0001%
- Especially for very dry samples such as ABS / PET etc.
- Drying temperature max. 160°C / 320°F
- Database with drying parameters for eg ABS, Crastin, Aramid...
- Stores the measurement data of the last 5,000 drying cycles
- Automatic chamber opens and closes without contact
- Non-contact control thanks to IR sensors
- Quickly import and export stored data using a USB flash drive

- Weighing range: 50 g / 0.11 lbs
- Readability: 0.1 mg = 0.0001 g / 0.0001%
- Especially for very dry samples such as ABS / PET etc.
- Drying temperature max. 160°C / 320°F
- Database with drying parameters for eg ABS, Crastin, Aramid...
- Stores the measurement data of the last 5,000 drying cycles
- Automatic chamber opens and closes without contact
- Non-contact control thanks to IR sensors
- Quickly import and export stored data using a USB flash drive

- Weighing range: 50 g / 0.11 lbs
- Readability: 0.1 mg = 0.0001 g / 0.0001%
- Especially for very dry samples such as ABS / PET etc.
- Drying temperature max. 160°C / 320°F
- Database with drying parameters for eg ABS, Crastin, Aramid...
- Stores the measurement data of the last 5,000 drying cycles
- Automatic chamber opens and closes without contact
- Non-contact control thanks to IR sensors
- Quickly import and export stored data using a USB flash drive

A gloss meter is a tester for determining surface gloss. Thereby, with the glossmeter, spectral reflections of a light beam that hits the surface, are measured. The touch screen allows for easy navigation.

- Measuring geometries: 20° / 60° / 85°
- Measuring range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm

A gloss meter is a tester for determining surface gloss. Thereby, with the gloss meter, spectral reflections of a light beam that hits the surface, are measured. The touch screen allows for easy navigation.

- Measuring geometries: 20° / 60° / 85°
- Measuring range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm

PCE-RVI 3 VP20 is a portable rotational viscometer used in industrial and research applications to measure viscosity according to the Brookfield method. Featuring an ergonomic design and up to 30 hours of battery life during continuous operation, this handheld viscometer is delivered with spindles R2, R3, R4, R5, R6 and R7 and displays measurements in millipascal-second (mPa.s).

- Rotational speed: 20 rpm
- Viscosity range: 200  ... 200,000 mPa.s / cP
- Accuracy: ±2 % reading (RD)

 

A gloss meter is a tester for determining surface gloss. Thereby, with the glossmeter, spectral reflections of a light beam that hits the surface, are measured. The touch screen allows for easy navigation.

- Measuring geometries: 20° / 60° / 85°
- Measuring range: 20° : 0 ... 1000 GU / 60° : 0 ... 1000 GU / 85° : 0 ... 160 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm

 

PCE-RVI 4 VP20 is a rotational viscometer used in industrial and research applications to measure viscosity according to the Brookfield method. Featuring a simple, lightweight construction for ease of portability, this digital viscometer can be used in the laboratory or in the field. This viscometer is delivered with spindles R2, R3, R4, R5, R6 and R7 and displays measurements in millipascal-second (mPa.s).

- Rotational speed: 20 rpm
- Viscosity range: 200 ... 200,000 mPa.s / cP
- Accuracy: ±2% full scale (FS)

 

The Infrared Thermometer sensor is made of robust stainless steel and can be used in harsh industrial environments. The Infrared Thermometer head is separated from the electronics and may be used at ambient temperatures of up to 250°C / 482°F. The Infrared Thermometer PCE-IR 33 is protected according to IP65.

- Measuring range: 300 ... 1600°C / 572 ... 2912°F
- Analog output
- Robust
- LED display
- External sensor head