Industrial Measurement Products and Solutions
Order no.: PCE-PIC 40
The PCE-PIC 40 condition monitoring inspection camera is an ideal tool for any service technician who needs to visually inspect pipes and ducts. The condition monitoring inspection camera PCE-PIC 40 has a 23 mm / 0.9 in camera head, which is attached to a glass fiber push cable.

- Cable diameter / head diameter: 23 mm / 0.9 in
- 40 m / 131 ft push cable
- Electronic meter count
- Battery and mains operation
- Waterproof up to 20 m / 66 ft 
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PIC 40
The PCE-PIC 40 drain camera is an ideal tool for any service technician who needs to visually inspect pipes and ducts. The drain camera PCE-PIC 40 has a 23 mm / 0.9 in camera head, which is attached to a glass fiber push cable.

- Cable diameter / head diameter: 23 mm / 0.9 in
- 40 m / 131 ft push cable
- Electronic meter count
- Battery and mains operation
- Waterproof up to 20 m / 66 ft 
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PIC 40
The PCE-PIC 40 HVAC meter is an ideal tool for any service technician who needs to visually inspect pipes and ducts. The HVAC meter PCE-PIC 40 has a 23 mm / 0.9 in camera head, which is attached to a glass fiber push cable.

- Cable diameter / head diameter: 23 mm / 0.9 in
- 40 m / 131 ft push cable
- Electronic meter count
- Battery and mains operation
- Waterproof up to 20 m / 66 ft 
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PIC 40
The PCE-PIC 40 industrial borescope is an ideal tool for any service technician who needs to visually inspect pipes and ducts. The industrial borescope PCE-PIC 40 has a 23 mm / 0.9 in camera head, which is attached to a glass fiber push cable.

- Cable diameter / head diameter: 23 mm / 0.9 in
- 40 m / 131 ft push cable
- Electronic meter count
- Battery and mains operation
- Waterproof up to 20 m / 66 ft 
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PIC 40
The PCE-PIC 40 inspection camera is an ideal tool for any service technician who needs to visually inspect pipes and ducts. The inspection camera PCE-PIC 40 has a 23 mm / 0.9 in camera head, which is attached to a glass fiber push cable.

- Cable diameter / head diameter: 23 mm / 0.9 in
- 40 m / 131 ft push cable
- Electronic meter count
- Battery and mains operation
- Waterproof up to 20 m / 66 ft 
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PIC 40
The PCE-PIC 40 NDT tester inspection camera is an ideal tool for any service technician who needs to visually inspect pipes and ducts. The NDT tester inspection camera PCE-PIC 40 has a 23 mm / 0.9 in camera head, which is attached to a glass fiber push cable.

- Cable diameter / head diameter: 23 mm / 0.9 in
- 40 m / 131 ft push cable
- Electronic meter count
- Battery and mains operation
- Waterproof up to 20 m / 66 ft 
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PIC 40
The PCE-PIC 40 videoscope is an ideal tool for any service technician who needs to visually inspect pipes and ducts. The videoscope PCE-PIC 40 has a 23 mm / 0.9 in camera head, which is attached to a glass fiber push cable.

- Cable diameter / head diameter: 23 mm / 0.9 in
- 40 m / 131 ft push cable
- Electronic meter count
- Battery and mains operation
- Waterproof up to 20 m / 66 ft 
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TDS 100H-TG50
The ultrasonic flow meter can be used to measure on metallic pipes, plastic pipes or rubber pipes. This set consists of an ultrasonic flow meter and an ultrasonic material thickness meter for metals, glass and homogeneous plastics.

Ultrasonic flow meter
- Measuring range: -32 ... +32 m/s
- Resolution: 0.0001 m/s
- Pipe size: DN 50 … 700, 57 … 720 mm
- Incl. sensors TDS-M1
- Incl. ISO calibration certificate
Ultrasonic material thickness meter
- Measuring range: 1.2 ... 200.00 mm (steel)
- Accuracy: ±0.5 % ±0.1
- Resolution: 0.1 mm
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TDS 100HS-TG50
This set consists of an ultrasonic flow meter and an ultrasonic material thickness meter for metals, glass and homogeneous plastics. The ultrasonic flow meter can be used to measure on metallic pipes, plastic pipes or rubber pipes.

Ultrasonic flow meter
- Measuring range: -32 ... +32 m/s
- Resolution: 0.0001 m/s
- Pipe size: DN 15 … 100, 20 … 108 mm
- Incl. sensors TDS-S1
- Incl. ISO calibration certificate
Ultrasonic thickness meter
- Measuring range: 1.2 ... 200.00 mm (steel)
- Accuracy: ±0.5 % ±0.1
- Resolution: 0.1 mm
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MCA 50-ICA
The calibrator data logger PCE-MCA 50 is intended for calibration and maintenance. This calibrator data logger PCE-MCA 50 enables the measurement and simulation of electrical quantities. Due to the battery operation, the calibrator data logger PCE-MCA 50 can be used in different locations.

- Simulation
- Pulse generation
- Pulse count
- Frequency generation
- Frequency measurement
- Extreme value and average measurement
- Continuity test
- USB interface
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MCA 50-ICA
The calibrator PCE-MCA 50 is intended for calibration and maintenance. This calibrator PCE-MCA 50 enables the measurement and simulation of electrical quantities. Due to the battery operation, the calibrator PCE-MCA 50 can be used in different locations.

- Simulation
- Pulse generation
- Pulse count
- Frequency generation
- Frequency measurement
- Extreme value and average measurement
- Continuity test
- USB interface
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MCA 50-ICA
The digital multimeter PCE-MCA 50 is intended for calibration and maintenance. This digital multimeter PCE-MCA 50 enables the measurement and simulation of electrical quantities. Due to the battery operation, the digital multimeter PCE-MCA 50 can be used in different locations.

- Simulation
- Pulse generation
- Pulse count
- Frequency generation
- Frequency measurement
- Extreme value and average measurement
- Continuity test
- USB interface
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MCA 50-ICA
The process calibrator PCE-MCA 50 is intended for calibration and maintenance. This process calibrator PCE-MCA 50 enables the measurement and simulation of electrical quantities. Due to the battery operation, the process calibrator PCE-MCA 50 can be used in different locations.

- Simulation
- Pulse generation
- Pulse count
- Frequency generation
- Frequency measurement
- Extreme value and average measurement
- Continuity test
- USB interface
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDM 10-ICA

The PCE-DDM 10 Crane Scale is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 10 Crane Scale is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum (see accessories for details).


- Max. capacity: 10 t / 22,046 lbs / 10,000 kg / 100,000 N / 100 kN
- Resolution: 5 kg / 50 N
- Selectable units: t / lbs / kg / N / kN
- Supplied with remote control indicator
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LDC 10

The Gas Leak Detector PCE-LDC 10 is used in a wide range of industries. For example, the gas leak detector can help identify leaks in compressed air, gas, steam, vacuum and refrigeration systems as well as around door seals. The noise-cancelling headphones of the ultrasonic leak detector ensure that the device can be used successfully even in noisy environments.


- Working frequency: 40 KHz ± 2 KHz
- Leak detection using sound
- Rechargeable Li-ion battery

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 355N3

The PCE-VE 355N3 is a two-way articulating industrial borescope, inspection camera, industrial endoscope or videoscope for the non-destructive inspection (NDI) of small components and hard-to-reach places. The camera head features 5 LED lights with automatic illumination. Pictures and videos are saved to the included 8 GB SD card memory, allowing easy transfer to a PC.


- 2-way camera probe
- Diameter camera head: Ø 4.5mm / 0.18"
- Interface: Mini-USB 1.1 und AV out/in
- Memory: 8 GB SD memory card (incl.)
- Cable length: 3 m /  9ft 10"

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 355N3

The PCE-VE 355N3 is a two-way articulating inspection camera, industrial endoscope, borescope or videoscope for the non-destructive inspection (NDI) of small components and hard-to-reach places. The camera head features 5 LED lights with automatic illumination. Pictures and videos are saved to the included 8 GB SD card memory, allowing easy transfer to a PC.


- 2-way camera probe
- Diameter camera head: Ø 4.5mm / 0.18"
- Interface: Mini-USB 1.1 und AV out/in
- Memory: 8 GB SD memory card (incl.)
- Cable length: 3 m /  9ft 10"

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LDC 10

The ultrasonic leak detector PCE-LDC 10 is used in a wide range of industries. For example, the ultrasonic leak detector can help identify leaks in compressed air, gas, steam, vacuum and refrigeration systems as well as around door seals. The noise-cancelling headphones of the ultrasonic leak detector ensure that the device can be used successfully even in noisy environments.


- Working frequency: 40 KHz ± 2 KHz
- Leak detection using sound
- Rechargeable Li-ion battery

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LDC 10

The ultrasonic tester leak detector PCE-LDC 10 is used in a wide range of industries. For example, the ultrasonic leak detector can help identify leaks in compressed air, gas, steam, vacuum and refrigeration systems as well as around door seals. The noise-cancelling headphones of the ultrasonic leak detector ensure that the device can be used successfully even in noisy environments.


- Working frequency: 40 KHz ± 2 KHz
- Leak detection using sound
- Rechargeable Li-ion battery

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 355N3

The PCE-VE 355N3 is a two-way articulating videoscope, inspection camera, industrial endoscope or borescope for the non-destructive inspection (NDI) of small components and hard-to-reach places. The camera head features 5 LED lights with automatic illumination. Pictures and videos are saved to the included 8 GB SD card memory, allowing easy transfer to a PC.


- 2-way camera probe
- Diameter camera head: Ø 4.5mm / 0.18"
- Interface: Mini-USB 1.1 und AV out/in
- Memory: 8 GB SD memory card (incl.)
- Cable length: 3 m /  9ft 10"

Manufacturer: PCE Instruments
Test Instruments manufacturer