The device clamp force gage PCE-4PCFM is a 4-point force gauge that can ensure the optimal clamp force distribution. The force gage is used on device clamps for white and brown goods to avoid damage caused by incorrect force distribution.

• Measuring range: 30,000 N / 3,000 kg / 3 t
• Resolution: 10N / 1kg
• Measurement uncertainty: ±0.5% full scale
• Position of the 4 sensors is adjustable
• Touch display including printer
• Optional: Measurement data storage on USB stick

The force gage is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension force gage. Despite the high measuring capacity, these materials enable a compact design with a low weight.

• Measurement range: 50,000 kg / 500 kN / 110,231 lb
• Resolution: 20 kg / 200 N / 44 lb
• Minimum load: 400 kg / 881 lb
• Supplied with remote control indicator

Our motorized force test stand can be coupled and operated in a wide variety of versions with our force gages, the PCE series. The motorized force test stand lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the motorized force test stand offers the operator the most precise equality of test bench and sample.

• Force range: max. 5000 N / 500 kg / 1100 lbs
• Travel: max. 300 mm / 11.8"
• Feed speed: 30 … 230 mm/min / 1.18 … 9.05 in/min
• Manual or automatic procedure
• incl. length measuring device: -150 … 150 mm / -5.9 … 5.9"
• incl. software
• incl. force gage PCE-DFG N 5K (0 … 5000 N)
• ** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***

The force gage is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension force gage. Despite the high measuring capacity, these materials enable a compact design with a low weight.

• Measurement range: 50,000 kg / 500 kN / 110,231 lb
• Resolution: 20 kg / 200 N / 44 lb
• Minimum load: 400 kg / 881 lb
• Supplied without remote control indicator

The force gage is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension force gage. Despite the high measuring capacity, these materials enable a compact design with a low weight.

• Measurement range: 20,000 kg / 200 kN / 44,092 lb
• Resolution: 10 kg / 100 N / 22 lb
• Minimum load: 200 kg / 440 lb
• Supplied with remote control indicator
• incl. ISO Calibration Certificate

Our motorized force gage can be coupled and operated in a wide variety of versions with our force gauges, the PCE series. The motorized force gage lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the motorized force gage offers the operator the most precise equality of test bench and sample.

• Force range: max. 5000 N / 500 kg / 1100 lbs
• Travel: max. 300 mm / 11.8"
• Feed speed: 30 … 230 mm/min / 1.18 … 9.05 in/min
• Manual or automatic procedure
• incl. length measuring device: -150 … 150 mm / -5.9 … 5.9"
• ** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***

The force gage measures both tensile forces and compressive forces and this with a very high resolution. The tensile force and the compressive force are often determined in the test laboratory, e.g. to determine the yield point, the tear-off force, the force required to operate a button or switch. The supplied motorized test stand can be coupled and operated in various versions with our force gages.

Dynamometer PCE-DFG N 5K

• Measuring range: 0 … 5000 N / 500 kg / 1100 lbs
• Resolution: 1N / 0.22 lbs
• Accuracy: ± 0.1% of the measuring range
• Memory for 100 measurements
• USB interface
• Graphic displayTest Stand PCE-MTS500
• Force range: max. 5000 N / 500 kg / 1100 lbs
• Travel path: max. 300 mm / 11.8"
• Feed speed: 30 mm/min … 230 mm/min / 1.18 … 9.05 in/min