Industrial Measurement Products and Solutions
Order no.: Laboratory Balance ABT 220-5DM

Laboratory Balance (EC-Type Approval [M])
The premium model with single-cell weighing system


- Capacity [Max]: 220 g
- Readability [d]: 0.00001 g
- Dimensions of weighing plate [Ø/BxT]: 8 cm
- EC-Type Approval M I

Verification as an additional option!

 

Manufacturer: Kern & Sohn GmbH
Test Instruments manufacturer
Order no.: PCE-MA 200

The laboratory balance PCE-MA 200 is used to weigh a range of substances up to 200g / 7.05oz and measure their moisture content. A halogen lamp heats up the chamber to 199 °C / 390 °F. The laboratory balance dries the substance to be weighed within the heating chamber and determines the moisture content from the difference in weight.


- Testing or weighing capacity: 200 g / 7.05 oz
- Readability: 1 mg / 0.001 g / 0.01 %
- Adjustable drying temperature and time

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MA 100

The laboratory balance PCE-MA 100 allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the laboratory balance dries the material to be weighed, and then calculates the moisture content from the weight difference.


- Testing or weighing capacity: 110 g / 3.88 oz
- Readability: 1 mg / 0.001 g / 0.01 %
- Adjustable drying temperature and time

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: Laboratory Balance EG 420-3NM

Laboratory Balance (EC-Type Approval [M])
Top of the range cost-effectiveness, with EC-Type Approval [M]


- Capacity [Max]: 420 g
- Readability [d]: 0.001 g
- Dimensions of weighing plate [Ø/BxT]: 11.8 cm
- EC-Type Approval M II

Verification as an additional option!

 

Manufacturer: Kern & Sohn GmbH
Test Instruments manufacturer
Order no.: PCE-MA 202

The PCE-MA 202 is an oven-drying laboratory balance for weighing and heating material samples to determine moisture content. The heating chamber warms up to 199 °C / 390 °F with the use of halogen lamps. Drying of the sample to be weighed takes place within the chamber of the laboratory balance and the moisture content is subsequently calculated from the difference between the initial and final weight.


- Testing or weighing capacity: 200 g / 7.05 oz
- Readability: 10 mg / 0.01 g / 0.1%
- Adjustable drying temperature and time

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: Laboratory Balance EW 6200-2NM

Laboratory Balance
Top of the range cost-effectiveness, with EC-Type Approval [M]


- Capacity [Max]: 6200 g
- Readability [d]: 0.01 g
- Dimensions of weighing plate [Ø/BxT]: 180x160 mm
- Calibratable


Manufacturer: Kern & Sohn GmbH
Test Instruments manufacturer
Order no.: PCE-ABZ 200C

This Laboratory Scale gets stable stand from its die cast aluminum housing. The glass weighing chamber avoids wind influences. Designed for uncomplicated performance, the PCE-ABZ 200C Laboratory Scale has only those features necessary for routine weighing along with a few design and performance extras that help eliminate common nuisances that can arise in laboratory, industrial and educational settings.


- Weighing capacity: 200 g
- Readability: 0.0001 g  (0.1 mg)
- High precision
- Precise parts counting

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-ABZ 100C

Laboratory Scale with high resolution (0.0001 g), RS-232-interface and optional software-kit / with weighing ranges of 0 ... 100 g.


- Weighing capacity: 100 g
- Readability: 0.0001 g  (0.1 mg)
- High precision
- Precise parts counting

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: Laboratory Balance EW 620-3NM

Laboratory Balance
Top of the range cost-effectiveness, with EC-Type Approval [M]


- Capacity [Max]: 620 g
- Readability [d]: 0.001 g
- Dimensions of weighing plate [Ø/BxT]: 11.8 cm
- Calibratable


Manufacturer: Kern & Sohn GmbH
Test Instruments manufacturer
Order no.: Laboratory Balance EG 220-3NM

Laboratory Balance (EC-Type Approval [M])
Top of the range cost-effectiveness, with EC-Type Approval [M]


- Capacity [Max]: 220 g
- Readability [d]: 0.001 g
- Dimensions of weighing plate [Ø/BxT]: 11.8 cm
- EC-Type Approval M II

Verification as an additional option!

 

Manufacturer: Kern & Sohn GmbH
Test Instruments manufacturer
Order no.: Laboratory Balance EW 4200-2NM

Laboratory Balance
Top of the range cost-effectiveness, with EC-Type Approval [M]


- Capacity [Max]: 4200 g
- Readability [d]: 0.01 g
- Dimensions of weighing plate [Ø/BxT]: 180x160 mm
- Calibratable

Manufacturer: Kern & Sohn GmbH
Test Instruments manufacturer
Order no.: PCE-SD 150SST C

Verifiable waterproof laboratory balance in stainless steel with separate indicator (no corrosion). The multifunctional scale is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).


- Weighing capacity: 150 kg
- Readability: 50 g
- Calibration value: 50 g
- Weighing surface: 600 x 500 mm
- Verifiable M III

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MA 110

PCE-MA 110 is a laboratory balance or halogen moisture analyzer that functions on the gravimetric or loss on drying (LOD) principle. The moisture analyzer uses the halogen method to dry the material sample. Moisture content is calculated based on the weight difference before and after the drying procedure. Calibration of the moisture analyzer can be performed at any time using the automatic calibration function and the included 100 g weight.


- Weighing range: 0.01 g ... 110 g / 0.0035 ... 3.88 oz
- Weighing resolution or readability: 0.1 g / 10 mg
- Moisture content measuring range: 0 ... 100%
- Moisture content resolution or readability: 0.1%
- Adjustable drying time and temperature
- Memory stores up to 16 drying profiles

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: Laboratory Balance EW 420-3NM

Laboratory Balance
Top of the range cost-effectiveness, with EC-Type Approval [M]


- Capacity [Max]: 420 g
- Readability [d]: 0.001 g
- Dimensions of weighing plate [Ø/BxT]: 11.8 cm
- Calibratable


Manufacturer: Kern & Sohn GmbH
Test Instruments manufacturer
Order no.: Laboratory Balance EW 2200-2NM

Laboratory Balance
Top of the range cost-effectiveness, with EC-Type Approval [M]


- Capacity [Max]: 2200 g
- Readability [d]: 0.01 g
- Dimensions of weighing plate [Ø/BxT]: 180x160 mm
- Calibratable


Manufacturer: Kern & Sohn GmbH
Test Instruments manufacturer
Order no.: PCE-SD 30SST C

Verifiable waterproof Laboratory Balance in stainless steel with separate indicator (no corrosion). The multifunctional Laboratory Balance is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).


- Weighing capacity: 30 kg
- Readability: 10 g
- Calibration value: 10 g
- Weighing surface: 400 x 500 mm
- Verifiable M III


Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 60SST C

Verifiable waterproof Laboratory Balance in stainless steel with separate indicator (no corrosion). The multifunctional scale is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).


- Weighing capacity: 60 kg
- Readability: 20 g
- Calibration value: 20 g
- Weighing surface: 500 x 400 mm
- Verifiable M III

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LSZ 200C

The Laboratory Scale is a high precision / resolution device for the determination of the basis weight (in relation to a square meter of materials). This is the most accurate way to determine basis paper / tissue weight.The Laboratory Scale displays the basis weight of paper, tissue, fabrics ... directly in g/m² with 0.1 g/m² (0.001 g) resolution.


- Weighing capacity: 0 ... 20000 g/m? / 0 ... 200 g
- Readability: 0.1 g/m²  o  0.001 g
- External calibration
- Units changeable (g/m² to g)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: Laboratory Balance PKP 12K0.05

Laboratory Balance
Robust laboratory and industrial scales with graphics display


- Capacity [Max]: 12100 g
- Readability [d]: 0.05 g
- Dimensions of weighing plate [Ø/BxT]: 160x200 mm
- Calibratable


Manufacturer: Kern & Sohn GmbH
Test Instruments manufacturer
Order no.: Laboratory Balance KB 650-2NM

Laboratory Balance (EC-Type Approval [M])
Convenient model at a basic price, also with EC-Type Approval [M]


- Capacity [Max]: 650 g
- Readability [d]: 0.01 g
- Dimensions of weighing plate [Ø/BxT]: 130x130 mm
- EC-Type Approval M II

Verification as an additional option!

 

Manufacturer: Kern & Sohn GmbH
Test Instruments manufacturer