Industrial Measurement Products and Solutions
Order no.: PCE-SD 6000E SST

The stainless steel floor scale is made entirely of high quality, acid resistant stainless steel. The weighing cells installed in the stainless steel floor scale have a protection class of IP68.

 

- Weighing range : 6000 kg
- Readability : 2 kg
- Taring range: over the entire weighing range
- Includes initial verification
- Calibratable M III

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 6000F SST
The stainless steel floor scale is installed in the floor to obtain a flat surface. This allows the stainless steel floor scale to be easily loaded with all kinds of conveyors.

- Weighing range : 6000 kg
- Readability : 2 kg
- Calibration included
- Calibratable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 3000F SST
The stainless steel floor scale is installed in the floor to obtain a flat surface. This allows the stainless steel floor scale to be easily loaded with all kinds of conveyors.

- Weighing range : 3000 kg
- Readability : 1 kg
- Calibration included
- Calibratable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 3000E SST

The stainless steel floor scale is made entirely of high quality, acid resistant stainless steel. The weighing cells installed in the stainless steel floor scale have a protection class of IP68.

 

- Weighing range : 3000 kg
- Readability : 1 kg
- Taring range: over the entire weighing range
- Includes initial verification
- Calibratable M III

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 1500F SST
The stainless steel floor scale is installed in the floor to obtain a flat surface. This allows the stainless steel floor scale to be easily loaded with all kinds of conveyors.

- Weighing range : 1500 kg
- Readability : 0.5 kg
- Calibration included
- Calibratable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HLTS 500
Thanks to the infinitely variable height adjustment, the hydraulic lift floor scale helps you work faster, more comfortably and with less strain on your back. This floor scale consists of a robust scissor lift table with an individual working height of 350…. 1130 mm / 13.8 ... 44.5 in enables. The hydraulic lift floor scale can lift a load of up to 0.5t (500 kg / 1102.3 lbs) and weigh it with a resolution of 0.2 kg / 0.4 lbs.

- Stepless height adjustment from 350… 1130 mm / 13.8 ... 44.5 in
- Weighing range up to 500 kg / 1102.3 lbs
- Resolution of the scale 0.2 kg / 0.4 lbs
- Target / actual check of the total weight
- Summing function
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 6000F
The verifiable built-in floor scale of the PCE-SD ... F series is intended for flush installation and is optionally available with a built-in frame on request. The calibrated built-in floor scale is calibrated according to Calibration Class III and is approved throughout the EU for use for transfer of goods for two years.

- Weighing range : 6000 kg
- Readability : 2 kg
- Calibration included
- Calibratable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 6000E

The floor scale is supplied calibrated and is intended for stationary use with its solid construction. Due to the robust design and the large platform, this calibrated weighing platform is particularly suitable for weighing large objects.

 

- Weighing range : 6000 kg
- Readability : 2 kg
- Taring range: over the entire weighing range
- Includes initial verification
- Calibratable M III

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 6000B SST

The floor scale PCE-SD..B SST is a verifiable weighing balance that is intended for flexible use. Due to the flexibly movable weighing beam (4 m), the floor scale is well suited for weighing large objects, and non-standard pallet sizes can also be weighed quickly and conveniently.

 

- Weighing range : 6000 kg
- Readability: 2 kg
- Calibration value: 2 kg
- Verifiable M III

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 1500E SST

The stainless steel floor scale is made entirely of high quality, acid resistant stainless steel. The weighing cells installed in the stainless steel floor scale have a protection class of IP68.

 

- Weighing range : 1500 kg
- Readability : 0.5 kg
- Taring range: over the entire weighing range
- Includes initial verification
- Calibratable M III

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 300E SST

The stainless steel floor scale is made entirely of high quality, acid resistant stainless steel. The weighing cells installed in the stainless steel floor scale have a protection class of IP68.

 

- Weighing range : 300 kg
- Readability : 0.1 kg
- Taring range: over the entire weighing range
- Includes initial verification
- Calibratable M III

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 600E SST

The stainless steel floor scale is made entirely of high quality, acid resistant stainless steel. The weighing cells installed in the stainless steel floor scale have a protection class of IP68.

 

- Weighing range : 600 kg
- Readability : 0.2 kg
- Taring range: over the entire weighing range
- Includes initial verification
- Calibratable M III

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 1500
The calibrated floor scales are ideal if you do not want to put scales into the ground. Simply place the floor scales in the room, fix the floor scales to the ramp with the fixing plates included in the scope of delivery, connect the operating terminal to the socket, and you can start weighing.

- Weighing range: 1500 kg
- Readability: 0.5 kg
- Calibration included
- Verifiable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 3000F
The verifiable built-in floor scale of the PCE-SD ... F series is intended for flush installation and is optionally available with a built-in frame on request. The calibrated built-in floor scale is calibrated according to Calibration Class III and is approved throughout the EU for use for transfer of goods for two years.

- Weighing range : 3000 kg
- Readability : 1 kg
- Calibration included
- Calibratable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 3000B SST

The floor scale PCE-SD..B SST is a verifiable weighing balance that is intended for flexible use. Due to the flexibly movable weighing beam (4 m), the floor scale is well suited for weighing large objects, and non-standard pallet sizes can also be weighed quickly and conveniently.

 

- Weighing range : 3000 kg
- Readability: 1 kg
- Calibration value: 1 kg
- Verifiable M III

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 1500U SST

The stainless steel U-shaped floor scale is a certifiable scale supplied in calibrated form. The dimensions of the stainless steel U-shaped floor scale are tailored to a range of EU sizes.


- Weighing range: 0 ... 1500 kg
- Readability: 0.5 kg
- Calibration value: 0.5 kg
- Verifiable M III
- Stainless steel IP68 - IP65

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 1500F
The verifiable built-in floor scale of the PCE-SD ... F series is intended for flush installation and is optionally available with a built-in frame on request. The calibrated built-in floor scale is calibrated according to Calibration Class III and is approved throughout the EU for use for transfer of goods for two years.

- Weighing range : 1500 kg
- Readability : 0.5 kg
- Calibration included
- Calibratable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WWSB8-S

PCE-WWSB8-S is a portable floor scale consisting of two weighing platforms and a carrying case with a built-in display and printer. Featuring connections for up to four weighing platforms (additional weighing platforms sold separately - see accessories), this floor scale calculates the total weight, wheel load and axle load of a vehicle.


- Weighing capacity per platform (wheel load): 8000 kg / 17636 lbs / 8.8 T
- Sum function for calculating vehicle weight plus trailer
- IP65 ingress protection rating on load cell for outdoor use

Manufacturer: Dini Argeo GmbH
Test Instruments manufacturer
Order no.: PCE-SD 1500B SST

The floor scale PCE-SD..B SST is a verifiable weighing balance that is intended for flexible use. Due to the flexibly movable weighing beam (4 m), the floor scale is well suited for weighing large objects, and non-standard pallet sizes can also be weighed quickly and conveniently.

 

- Weighing range : 1500 kg
- Readability: 0.5 kg
- Calibration value: 0.5 kg
- Verifiable M III

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 3000E

The floor scale is supplied calibrated and is intended for stationary use with its solid construction. Due to the robust design and the large platform, this calibrated weighing platform is particularly suitable for weighing large objects.

 

- Weighing range : 3000 kg
- Readability : 1 kg
- Taring range: over the entire weighing range
- Includes initial verification
- Calibratable M III

Manufacturer: PCE Instruments
Test Instruments manufacturer