Industrial Measurement Products and Solutions
Order no.: PCE-EM 30

PCE-EM 30 is a digital portable 3-axis environmental electromagnetic radiation meter or EMF detector used to measure electromagnetic radiation generated by electronic devices and electric installations. This triple-axis EMF meter provides greater precision than single-axis models as well as affords the ability to assess EMFs from more than one source at a time.


- Measuring range: 0 to 199.99 V/m, 0 to 99.999 W/m², 0 to 9.9999 mW/cm²
- EMF bandwidth: 100 kHz to 3 GHz
- Comes with two external sensor probes (for low and high frequency ranges)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-ISFET
The innovative ISFET (ion-selective field effect transistor) technology enables maintenance-free operation. The high accuracy of the environmental measuring device PCE-ISFET additionally enables the application in highly critical mixing processes.

- Measuring range: pH 0.00 ... 14.00
- Data memory for up to 65000 measured values
- USB interface
- 5 point calibration
- Various electrodes available

- Electrodes must be selected in the accessories!
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-G1A

PCE-G1A is an environmental meter with a large display. This IP54-rated wall-mountable device measures both relative humidity (%RH) and temperature (°C only). The PCE-G1A environmental meter has a large LED display with a number height of 100 mm / 3.9 in, so measurement values can be seen at a distance of up to 50 m / 164 ft away. Celcius only temperature display.


- Measurement ranges relative humidity / temperature: 10 ... 95% RH / 0 ... 60°C
- Resolution relative humidity / temperature: 1% RH / 1°C
- Accuracy relative humidity / temperature: ±2% RH / 1°C
- 2-channel analog output of 4 ... 20-mA
- Display: 100 mm / 3.9 in tall LED digits (alternates values) 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-G1

The PCE-G1 Environmental Meter has been designed for measuring relative humidity and temperature, with readings shown on its high visibility display. The Environmental Meter is composed of a 100 mm high LED and comes with IP54 rating. Celcius only temperature display.


- Relative humidity / temperature: 10 to 95% r.h. / 0 to 60 °C
- Resolution relative humidity / temperature: 1% r.h. / 1 °C
- Accuracy relative humidity / temperature: ±2% r.h. / 1 °C
- Display: 100 mm high LED (alternates values)
- Protection: IP 54

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WM1

PCE-WM1 is a multi-function environmental meter used to determine relative humidity (% RH), absolute humidity (g/m³), air temperature, dew-point temperature and surface temperature (°C). This Metric-only measuring instrument comes complete with an external sensor probe for taking the surface temperature of different materials.


- Temperature range: -20 ... 80°C 
- Relative humidity range: 10 ... 95% RH
- Absolute humidity range: 0.5 ... 74.4 g/m³

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-AQD 20
The environmental meter PCE-AQD 20 is an ideal measuring device for monitoring the air quality at workplaces. The PCE-AQD 20 health and environmental meter is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.

Measuring function
- PM2.5
- Humidity
- Temperature
- CO2
- Air pressure
- Memory: SD card max. 32 GB
- Ideal for workplace monitoring
- Alarm function
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WL 1

The environmental meter PCE-WL 1 is an ideal tool to measure and store the wind speed over a long period of time. The battery operation enables you to use the environmental meter for mobile applications. Since a wind power station is an expensive investment, you usually want to know what profits it will generate in advance. The environmental meter PCE-WL1 helps you determine these profits.


- Measuring range: 0.8 ... 40 m/s
- Accuracy: ± 0.5 m/s or 5% of measurement value
- Battery life up to 3 years
- 512 MB microSD card incl. 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: LXT-ICA
The environmental meter consists of a measuring sensor with handle, a wall bracket with a 1.5 m / 4.9 ft cable, a light transmitter and a digital display. The main field of application of the environmental meter is the continuous light measurement and light monitoring of photo laboratories and production areas, such as food or drug production.

- Measuring range: 0 ... 50,000 lx
- Resolution: 0.1 / 1 lx
- For permanent installation
- Relay and control output
- Incl. ISO calibration
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MMK 1

PCE-MMK 1 is a portable handheld digital moisture meter used to measure the moisture content of wood, paper, textiles, concrete and other building materials. This multifunction environmental meter also measures ambient temperature and ambient relative humidity.


Measuring ranges:
- Wood, paper, textiles: 1 ... 75% moisture
- Concrete, building materials: 0.1 ... 2.4% moisture
- Ambient temperature: -40 ... 70°C / -40 ... 158°F
- Ambient relative humidity (RH): 0 ... 100 % RH

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-322ALEQ-ICA
The environmental meter PCE-322A is particularly suitable for measuring noise in the field of industrial, health, safety and environmental monitoring. The PCE-322A environmental meter has a logger function, which allows storage of up to 32700 readings.


- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- incl. software for LEQ calculation
- incl. ISO calibration certificate

Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-330-ICA

PCE-330 is an environmental meter or hygro-thermometer with a quick-response sensor for determining ambient temperature, relative humidity and dew point temperature. Equipped with an easy-to-read dual display, this data-logging indoor air quality (IAQ) meter features a large internal memory with storage for up to 16,000 recorded values.


- Temperature range: -20 ... 60°C / -4 ... 140°F
- Relative humidity range: 0 ... 100% RH
- Resolution: 0.1° / 0.18°F
- Accuracy: ± 0.8°C / ± 1.5°F, ± 2.0 ... 4.0% RH
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WB 20SD

PCE-WB 20SD is a data-logging environmental meter used to measure indoor / outdoor wet bulb globe temperature (WBGT), black globe temperature (TG), wet bulb temperature (WB), dew point temperature, air temperature (TA) and relative humidity. Thus, this multipurpose data-recording device is an ideal tool for evaluating heat stress risks in different work environments.


- Programmable WBGT alarm setting with audible and visual alerts
- Manual (push-button) or automatic (adjustable 1 ... 3600 sec) sampling
- SD card memory (1 ... 16 GB) allows for quick and easy data transfer to a PC

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VDL 16I
The environmental meter PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this environmental meter is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
Temperature, Humidity, Air pressure, Vibration, and Light

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WSAC 50

PCE-WSAC 50 is an environmental meter alarm controller that displays the current wind speed as well as the average wind speed of the last 2 and 5 minutes. This environmental meter alarm controller allows measurement of the slightest of wind movements. PCE-WSAC 50 is used for a variety of wind monitoring applications in industries such as construction, mining, renewable energy and manufacturing.


- Pre-alarm and full alarm with visual and audible warnings
- Optional RS-485 modbus interface for data communication
- Measuring range: 0 ... 50 m/s or 0 ... 110 mph
- Incl. ISO calibration certificate

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MFM 3500
The electromagnetic environmental meter is a reliable measuring device for measuring the existing magnetic field. This electromagnetic environmental meter is suitable for measuring both static and alternating magnetic fields.

Measuring function:
- Measuring range up to 30,000 G
- DC Milli Tesla
- DC Gauss
- AC Milli Tesla
- AC Gauss
- Temperature
- Switchable AC / DC measurement
- Memory: Manual / Automatic
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-G 2
The Environmental Meter PCE-G 2 is used to measure the environmental parameters of temperature and humidity. The environmental meter is used in warehouses, open-plan offices, schools, etc.

- Measuring range temperature: -40 ... 85 °C
- Measuring range humidity: 0 ... 99 % r.H.
- 55 mm character height
- Up to 30 m reading distance
- External sensor (wired)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-313A-ICA

The PCE-313A environmental meter measures relative humidity and temperature and can be used in the air-conditioning sector. The PCE-313A environmental meter can be connected to type K thermo-elements to detect, for instance, the temperature of a wall by means of a surface probe. The internal memory of this test equipment allows the environmental meter to record humidity and temperature data at an adjustable measurement interval. Thanks to its SD memory card (1 to 16 GB) the humidity test instrument can be used for long term data acquisition.


- Relative humidity: 5 ... 95% r.H.
- Temperature: 0 ... 50°C / 32 ... 122°F
- Type K: -50 ... 1300°C / -58 ... 2372°F
- Calculated dew point: -25.3 ... 48.9°C / -13.5 ... 120°F
- Wet bulb temperature: -21 ... 50°C / -5.8 ... 122°F
- Memory: SD card (1 ... 16 GB)
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RAM 10

The Environmental Meter PCE-RAM 10 measures α-, β-, γ- and X-rays and offers a high measurement accuracy and convenient design. Using the integrated Bluetooth interface in the Environmental Meter, the measured values can be sent in real time to a PC and analyzed with the included software.


- Α-, β-, γ- and X-rays
- Bluetooth interface
- Internal memory
- Software Included

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HT 300
The environmental meter PCE-HT 300 is a laboratory data logger for temperature, dew point and humidity. The environmental meter stores the measurement data on an internal 16 GB memory in CSV format. 

Measuring function
- Temperature: -10 ... 80°C / 14 ... 176°F
- Dew point: -10 ... 80°C / 14 ... 176°F
- Humidity: 0 ... 100% RH
- 16 GB of memory
- Storage as CSV
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: LXT-TRM-ICA

The environmental meter consists of a measuring sensor with handle, a wall bracket with a 1.5 m / 4.9 ft cable, and a light transmitter. The main field of application of the light meter is the continuous light measurement and light monitoring of photo laboratories and production areas, such as food or drug production.  

 

- Measuring range: 0 ... 50,000 lux in three ranges
- Resolution: 0.1 lx / 1 lx
- Accuracy: ± 5% of the reading
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer