• Measuring range from -344 … +344 mbar
• Parameters:
  inH2O, psi, mbar, kPa, inHg, mmHg,
     ozin², ftH2O, cmH2O, kgcm², bar
• Backlight can be switched on/off
• Software with USB cable included

The PCE-THB 38 Environmental Meter is ideal for detecting and digitally displaying humidity, temperature and barometric pressure. Temperature is measured by an RTD sensor and air humidity is measured by a highly repeatable, capacitive sensor. All products are test instruments, and the Environmental Meter is sent out manufacturer calibrated. An ISO certification is available optionally.

• Temperature: 0 … 50°C / 32 … 122°F
• Relative air humidity: 10 … 95% r.h.
• Barometric pressure: 10 … 1100 hPa (mbar) / 0.14 psi … 16 psi.
• Dew point temperature: -25 … 49°C / -13 … 120°F

• Accumulated radiation measurement
• Adjustable acoustic alarm
• Battery operation

• HCHO measuring range: 0.00 … 5.00 mg/m³
• TVOC measuring range: 0.00 … 9.99 mg/m³
• Temperature measuring range: 0 … 50 °C / 32 … 122 °F
• Humidity measuring range: 0 … 100% RH
• Memory for 5000 measuring points
• Battery and mains operation

• Infrared measuring range: -35 … 330°C / -31 … 626°F
• Type of measurement puncture sensor measuring range: -20 … 260°C / -4 … 500°F
• Measurement spot ratio: 4: 1
• For frozen, cold and hot foods
• Incl. ISO calibration certificate

• Measuring range PM2.5: 0 … 500 μg / m³
• Measuring range temperature: -10 … 50°C / 14 … 122°F
• Measuring range humidity: 0 … 99% rh
• Pictograms indicate air quality
• Battery operation
• Micro USB for charging

• Air temperature: -20 … 60 °C / -4 … 140 °F
• Humidity: 0 … 100% RH
• Wet bulb temperature, dew point
• Data memory for 32,000 readings
• Type K thermocouple

• Measuring range:  0.8 m / s … 50 m / s
• Measurement from: ≤0.8 m / s
• Output:  4 … 20 mA (passive)
• IP 65 protection 
• mA, V, pulse or Modbus output

• Measuring range:  0.8 m / s … 50 m / s
• Measurement from: ≤0.8 m / s
• Output: 0 … 10 V
• IP 65 protection 
• mA, V, pulse or Modbus output

The environmental meter is used for fast and accurate detection of pH and temperature. Due to the practical double display, both values ​​can be read simultaneously on the environmental meter.

• Measuring range: 1000 … 400,000 lux
• Resolution: 0.1 lux
• Lux and footcandle units
• Rechargeable battery

• Measurement of differential pressure and relative pressure
• 11 selectable units: mbar, bar, psi, kPa, …
• Measuring range from -140 to +140 mbar
• Min / max and average value display directly on the display
• USB interface

The environmental meter for soil has been developed with the purpose of finding an effective method for directly determining the pH value of soil. With the help of this environmental meter, it is possible to quickly and accurately measure the pH value of soil, including a soil sample taken from the ground.

• Measuring range: 0.00 … 14.00 pH
• Dissolution: 0.01 pH
• Power supply: 4 x 1.5 V AAA batteries

• *Care must be taken when inserting probe to not break it** 

• Measurement range: 0.01 … 99.99 µSv/h
• Resolution: 0.01 µSv/h
• Detectable radiation: γ-rays, β-rays, X-rays
• Sensitivity: 0.25 cps/
• Data storage for 167,857 values
• Real-time value, average value
• Accumulated value in mSv for long-term measurements
• Adjustable alarm threshold