Environmental Meter PCE-VDL 16I
£ 228.00
Price excl. VAT &. delivery
The environmental meter PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this environmental meter is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

  • 3-Axis acceleration up to 800 Hz
  • 32 GB SD memory card
  • Evaluation software
  • Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
  • Temperature, Humidity, Air pressure, Vibration, and Light
Environmental Meter PCE-PH 28L
£ 227.00
Price excl. VAT &. delivery
The environmental meter is equipped with a flat electrode membrane which is installed in a shaft. So with the environmental meter you can measure samples of viscous media in test tubes. This feature makes it possible to use very small volumes of liquids in beakers or test tubes. As a result, the environmental meter can be used not only in the field but also in the laboratory.

  • Calibration points: 1, 2 or 3
  • Measuring range: -1 … 15 pH
  • Temperature measuring range: 0.0 … 60°C / 32 … 140°F  
  • Flat pH electrode with long shaft
  • Automatic temperature compensation
  • For small sample quantities
Environmental Meter PCE-354-ICA incl. ISO-Calibration Certificate
£ 224.00
Price excl. VAT &. delivery
ISO Calibration
The environmental meter is a small handheld device with many functions such as peak measurement, Leq value calculation and adjustable measuring ranges. In addition, the environmental meter can freeze the largest measured value with the MAX function so that you can really judge whether a limit has been exceeded.

  • Measuring range: 30 … 130 dB
  • Measuring function: Leq, LAp and LCp
  • Memory function 99 measured values
  • Frequency range 20 … 12500 Hz
  • Display with backlight
  •  incl. ISO-Calibration Certificate
Environmental Meter PCE-CMM 10
£ 220.00
Price excl. VAT &. delivery
The environmental meter PCE-CMM 10 is a multi-function meter for measuring the air quality. This environmental meter measures synchronously the CO2 concentration, the air temperature and the humidity. 

  • Measuring range CO2: 400 … 5000 ppm
  • Measuring range temperature: -10.0 … 50.0°C / 14 … 122°F
  • Measuring range humidity: 0 … 99% rh
  • Battery operation
  • Limit exceeded
  • Beep
Environmental Meter PCE-HT 71N-ICA Incl. ISO Calibration Certificate
£ 220.00
Price excl. VAT &. delivery
ISO Calibration

The PCE-HT 71N environmental meter detects air temperature and humidity and stores readings in its internal memory. The environmental meter has a compact format and a wide memory capacity (up to 32,000 values / 16,000 values for each parameter) and it is mainly used as a data logger in fields such as supermarket refrigeration units, refrigerated transport, warehouses, and other temperature controlled environments.


  • Measurement range: 0 … 100% RH / -35 … 70°C / -31 … 176°F
  • Accuracy: ± 3% RH (20 … 80%) and  ± 5% / ± 1°C (1.8°F)
  • Resolution: 0.5% RH / 0.1°C (0.18°F)
  • Memory: Max. 32,000 measurement data (16,000 for each parameter (humidity / temperature))
  • Incl. ISO calibration certificate

Environmental Meter PCE-T 330
£ 220.00
Price excl. VAT &. delivery
The environmental meter has two measuring inputs. Each measuring input from the environmental meter can be connected to a thermocouple of type K, T and J. With a measuring rate of 2 Hz, the environmental meter shows rapid temperature fluctuations.

  • Measuring range dependent on sensor: -200 … 1370 °C / -328 … 2498 °F
  • Resolution: 0.01 °C
  • Two-channel temperature data logger
  • For thermocouples type K, T and J
  • Data storage for 20,000 measuring points
Environmental Meter PCE-HT 72-ICA incl. ISO Calibration Certificate
£ 218.00
Price excl. VAT &. delivery
ISO Calibration

The temperature / humidity environmental meter is a data logger has a memory of 20,010 sets of measurements and allows use of up to several months. The temperature / humidity environmental meter is particularly suitable for measuring tasks where it is not possible for the user to install software for reading the measured values.

  • Measuring range temp.: -30 … 60 °C / -22 … 140 °F
  • Measuring range rel. humidity: 0 … 100% RH
  • Measurement protocol as PDF
  • Data export possible as CSV
  • Readable without software
  • 20,010 sets of measured values can be stored
  • incl. ISO Calibration Certificate

Environmental Meter PCE-HT110
£ 213.00
Price excl. VAT &. delivery

The PCE-HT110 Environmental Meter or Humidity Detector precisely measures air temperature and relative humidity. This accurate and reliable device shows the current measurements on the large LCD display and saves the measurement data directly to an SD card (included). The PCE-HT110 is equipped with two channels, accommodates an SD card memory of up to 16 GB, offers an adjustable measurement rate / sampling interval, and includes a wall mount, making the device ideal for logging data over an extended period of time.


  • Measurement ranges: 0 … 50°C / 32 … 122°F, 10 … 90% RH
  • Resolution: 0.1°C / 0.18°F, 0.1% RH
  • Data format: .XLS (compatible with Microsoft Excel)

Environmental Meter PCE-THT 10
£ 207.00
Price excl. VAT &. delivery
Wireless

The environmental meter has a temperature measuring range of -20 … 60 °C and a humidity measuring range of 0 … 99.9% RH. The readings from the environmental meter can be read directly on the 2.3" color display.

Temperature measurement

  • Measuring range: -20 … 60 °C / -4 … 140 °FHumidity measurement
  • Measuring range: 0 … 99.9% RH
  • Data memory for 12800 measuring points
  • For mounting on the wall
  • WiFi interface